2001 BMW Z3 Vehicle Hoods

Hood Stop Buffer

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

The body of FEQ gas springs are made of high quality seamless tubes, treated with phosphate before painting to increase protection against corrosion, and help the special grade paint adhere to the body of the gas spring strongly. FEQ Struts provide nitrate treated black rods. Chrome rods are not resistant to environmental factors neither environmental friendly as nitrate treated black ones. Plus, visually black color rod compliments the product better than grey chrome color.)

Product Features:

• The two point spray gun paint system seals extremities and hard to reach places of the body of the gas spring for better protection against deterioration of the paint and corrosion.
• Rods are machined on centerless grinding and polishing machines and also treated with centerless rollers to obtain a smooth surface for the long life cycle that Tuff Support gas springs have.
• Rod diameters are checked with lasers for imperfections and diameter fluctuations to meet OEM specs.
• Pressurized lift supports go through Phosphate treating process for paint to adhere properly to body of lift support and give long paint life.
• Rods are heat treated and nitrated for hardening and resistance to corrosion.
• Internal components such as seals, washers and o-rings are procured from suppliers who are TS16949 and ISO9001 certified manufacturers.

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.

Product Features:

• Exact replacement, engineered for your application.
• Rust-resistant piston rod extends product life.
• Easy lifting, reduced closing effort.
• Consistent lifting force through 50,000 cycles.

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal