2001 BMW M3 Air Conditioning Parts

Essential 2001 BMW M3 Air Conditioning Parts

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56800)

A/C Suction Line Hose Assembly

from

$165.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Nissens – A/C Condenser (Part No.R103034662NSS)

A/C Condenser

from

$243.39
Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.

Product Features:
  • OEM Quality Direct fit Application
  • Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.
See More

Vaico – A/C Hose (Part No.R1020299847VCO)

A/C Hose

from

$275.22
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More

ACM – A/C Pressure Switch (Part No.R105481960ACM)

A/C Pressure Switch

from

$94.92
ACM is a supplier of Original Equipment quality climate control products.
See More

KAI – A/C System Seal Kit (Part No.FTT010073)

A/C System Seal Kit

from

$18.99
New Standard Replacement A/C System Seal Kit, MT2640, L4 Engine

Product Features:
  • MT2640, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rein – A/C Evaporator (Part No.R1130397473RIN)

A/C Evaporator

from

$217.19
A/C Evaporator

Rein – A/C Evaporator (Part No.ACE0080R)

A/C Evaporator

from

$259.99
Rein OE Quality Air Conditioning Evaporator. Pressure tested before leaving the factory. Designed according to OE specifications, ensuring fit and function are identical to the original evaporator.
See More

Vaico – Fan Shroud Rivet (Part No.G502575975VCO)

Fan Shroud Rivet

from

$1.31
Fan Shroud Rivet

Carquest Premium – A/C Filter Drier (Part No.T33438)

A/C Filter Drier

from

$34.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T33668)

A/C Filter Drier with Pad Mount

from

$35.49
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Liquid Line Hose Assembly without Orifice Tube (Part No.T56196)

A/C Liquid Line Hose Assembly without Orifice Tube

from

$47.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T38602)

A/C Block Type O-Ring Expansion Valve

from

$44.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39399)

A/C Block Type O-Ring Expansion Valve

from

$97.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26784)

Cap & Valve A/C System Seal Kit

from

$54.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

ACM – Air Conditioning Schrader Valve Cap (Part No.R1138333659ACM)

Air Conditioning Schrader Valve Cap

from

$14.61
ACM is a supplier of Original Equipment quality climate control products. Only for R134A suction pipes.
See More

ACM – A/C Evaporator Temperature Sensor (Part No.R1071273277ACM)

A/C Evaporator Temperature Sensor

from

$35.48
ACM is a supplier of Original Equipment quality climate control products. Heater / Evaporator Temperature Sensor
See More

Delphi – ABS Wheel Speed Sensor (Part No.SS20043)

ABS Wheel Speed Sensor

from

$146.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi sensors are built to meet or exceed OE requirements and testing
  • Delphi has improved the OE design by plating the connectors to help prevent corrosion and failure commonly caused by internal and cable short circuits
  • Delphi’s OE design helps by preventing mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
  • Speed sensors maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA4375)

ABS Wheel Speed Sensor

from

$256.99
ABS Wheel Speed Sensor

ATE – ATE ABS Speed Sensor (Part No.N6030569475ATE)

ATE ABS Speed Sensor

from

$128.79
The ATE OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Carquest Premium – New Compressor (Part No.T168365)

New Compressor

from

$499.99
Carquest Premium A/C compressors are 100% new units that are manufactured to the highest quality to meet or exceed OE specifications.

Product Features:
  • Every unit is 100% function and leak tested
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
  • Very low friction coating used on swash plate to improve durability
  • PTFE coated pistons improve performance and reduce wear
  • Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
  • Matched high-quality needle-roller bearing ensures low friction and high load capability
  • Limited Lifetime Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
See More

Carquest Premium – A/C New, with Clutch, with 7SEU16C Compressor (Part No.T158357)

A/C New, with Clutch, with 7SEU16C Compressor

from

$449.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

KAI – A/C Compressor, L6 Engine (Part No.ACP011470)

A/C Compressor, L6 Engine

from

$435.99
New Standard Replacement A/C Compressor, L6 Engine

Product Features:
  • L6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Standard – Reman Nippondenso 10PA17C Compressor w/ Clutch (Part No.DW57356)

Reman Nippondenso 10PA17C Compressor w/ Clutch

from

$224.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1749)

Multi Purpose Relay

from

$36.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

2001 BMW M3 Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 2001 BMW M3. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 31 different Air Conditioning Parts in our inventory ranging from $1.31 to $435.99. That means you can find the exact parts or products you need to keep that 2001 BMW M3 running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 2001 BMW M3. Carquest Premium, Factory Air, and DENSO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 2001 BMW M3, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 2001 BMW M3 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 2001 BMW M3 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2001 BMW M3 demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your M3 the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular ACM Air Conditioning Parts

We carry ACM parts in our stock across AC Thermal Evaporator Switches categories, plus more. For a 2001 BMW M3, our most popular ACM Air Conditioning Parts include:
A/C Evaporator Temperature Sensor
from $35.48
(1)
A/C Evaporator Temperature Sensor
AC Thermal Evaporator Switches

Top 2001 BMW M3 Air Conditioning Parts from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Air Conditioning Parts for your 2001 BMW M3. Popular Carquest Premium parts include:
A/C Filter Drier with Pad Mount
from $45.99
(1)
A/C Filter Drier with Pad Mount
Accumulator and Receiver Driers
A/C New; w/ Clutch; w/ 7SB16C Compressor
from $371.99
(1)
A/C New; w/ Clutch; w/ 7SB16C Compressor
AC Compressor Without Clutch

FAQs for 2001 BMW M3 Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 2001 BMW M3?

Out of 31 Air Conditioning Parts for the 2001 BMW M3, the most popular in our inventory are:
Multi Purpose Relay
from $36.49
This product is not rated
Multi Purpose Relay
Air Conditioning Relays
Cap & Valve A/C System Seal Kit
from $54.99
This product is not rated
Cap & Valve A/C System Seal Kit
AC Line O-Rings
New Compressor With Clutch
from $413.99
This product is not rated
New Compressor With Clutch
AC Compressor Without Clutch