2001 BMW 540i Suspension Parts

Please Select your Vehicle to See Exact Fit Parts

Essential Suspension Parts for 2001 BMW 540is

Rare Parts – Control Arm Bushing (Part No.RP19637)

Control Arm Bushing

from

$81.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920117)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$149.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

Suncore – Air Bag (Part No.254BW-15-RR)

Air Bag

from

$94.99
Air Bag

Dorman – Suspension Knuckle Bushing (Part No.905-533)

Suspension Knuckle Bushing

from

$66.99
This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

KYB – Jounce Bumper and Bellows (Part No.SB108)

Jounce Bumper and Bellows

from

$37.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Suncore – Quick Strut Kit (Part No.2-55S15950-001)

Quick Strut Kit

from

$239.99
Quick Strut Kit

Monroe – Strut-Mate Front Suspension Strut Bumper and Bellows Kit (Part No.63638)

Strut-Mate Front Suspension Strut Bumper and Bellows Kit

from

$29.99
Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

URO Parts – STEER ANGLE SENSOR (Part No.32306793632)

STEER ANGLE SENSOR

from

$129.99
For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:
  • Guaranteed Fitment
  • Ideal direct-fit replacement for faulty OE steering angle sensor
  • Quality materials resist wear and provide accurate steering angle signal
  • Designed for reliability and long service life
See More

Rare Parts – Control Arm (Part No.RP12488)

Control Arm

from

$289.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • OE replacement
  • Reduces vibration
  • Reduces tire wear
See More

Rein – Control Arm (Part No.SCA0190P)

Control Arm

from

$97.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

Suncore – SuspAirBag/Bellows (Part No.255BW-15-R-PAIR)

SuspAirBag/Bellows

from

$189.99
SuspAirBag/Bellows

Suncore – SuspAirBag/Bellows (Part No.255BW-15-RL)

SuspAirBag/Bellows

from

$94.99
SuspAirBag/Bellows

Dorman – Suspension Control Arm (Part No.524-076)

Suspension Control Arm

from

$36.99
This suspension integral link is precision-engineered and rigorously tested to match the fit and function of the original equipment part on specific vehicles.

Product Features:
  • Direct replacement – this integral link fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using quality materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Arnott Air Suspension – Air Spring (Part No.A-2737)

Air Spring

from

$187.99
Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Product Features:
  • Exclusively for BMW 5-series Wagons (E39) w/rear Leveling
  • Multi-ply Continental ContiTech air sleeve
  • Heavy-duty crimping rings
  • Custom-designed, high-impact resin bottom piston with a brass insert
  • Constructed to meet or exceed industry’s standards for quality, reliability and function
  • Replace in pairs
See More

Arnott Air Suspension – Air Spring (Part No.A-2738)

Air Spring

from

$187.99
Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Product Features:
  • Exclusively for BMW 5-series Wagons (E39) w/rear Leveling
  • Multi-ply Continental ContiTech air sleeve
  • Heavy-duty crimping rings
  • Custom-designed, high-impact resin bottom piston with a brass insert
  • Constructed to meet or exceed industry’s standards for quality, reliability and function
  • Replace in pairs
See More

Suncore – Complete Strut Assem (Part No.55S15950)

Complete Strut Assem

from

$119.99
Complete Strut Assem

Arnott Air Suspension – Air Suspension Compressor – WABCO (Part No.P-2469)

Air Suspension Compressor - WABCO

from

$975.99
Arnott has teamed up directly with WABCO to supply you with the same OE part at a fraction of the dealer cost. These compressors are made by the same supplier used by BMW. Arnott now has the one-stop solution for those who prefer the original equipment. This same compressor assembly will cost you more than you care to pay at your local BMW dealership! This is just the compressor and dryer assembly. You will have to reuse your intake lines, mounting brackets, and plug. This new compressor comes with detailed instructions. This compressor is ONLY for vehicles equipped with rear only air suspension.

Product Features:
  • Exclusively for 00-06 BMW X5 (E53), 99-03 BMW 5-Series (E39), 02-08 BMW 7-Series (E65,E66)
  • Wabco Unit Same As OE
  • Reuse Intake Lines
  • Reuse Mounting Brackets And Plug
  • Includes Detailed Instructions
See More

Suncore – Air Spring Kit (Part No.254BW-15-R-PAIR)

Air Spring Kit

from

$209.99
Air Spring Kit

Rare Parts – Strut Mount (Part No.RP17722)

Strut Mount

from

$119.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Prevents tire noise and vibration
See More

Rare Parts – Strut Mount (Part No.RP17753)

Strut Mount

from

$62.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Prevents tire noise and vibration
See More

Rare Parts – Strut Mount (Part No.RP18876)

Strut Mount

from

$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Prevents tire noise and vibration
See More

Suncore – SuspUpKt (Part No.255BW-15-R-KIT)

SuspUpKt

from

$569.99
SuspUpKt

Upgrade your 2001 BMW 540i with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2001 BMW 540i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Suspension Parts are key to keeping your 540i functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Suspension Parts for the 2001 BMW 540i, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Air Suspension and Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2001 BMW 540i at great prices. Our Suspension Parts inventory for this model ranges from just $26.49 to $975.99, with an average price of $176.99. Our 27 Suspension Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 2001 BMW 540i without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 BMW 540i is always ready to roll. We’re committed to providing you with everything you need to keep your 540i in top shape, all in one place. Start shopping confidently below for your 2001 BMW 540i!

Best-Selling Coil and Leaf Springs for 2001 BMW 540is

Enhance the driving experience in your BMW with 1 quality Coil and Leaf Spring components, starting at $119.99.

Suncore – Complete Strut Assem (Part No.55S15950)

Complete Strut Assem

from

$119.99
Complete Strut Assem

Most Popular 2001 BMW 540i Air Suspension and Kits

Customize your BMW with 12 Air Suspension and Kits products like Front and Rear Shock or Strut Kits, Suspension Air Compressors, and Suspension Air Springs, all priced under $975.99.

Monroe – Strut-Mate Front Suspension Strut Bumper and Bellows Kit (Part No.63638)

Strut-Mate Front Suspension Strut Bumper and Bellows Kit

from

$29.99
Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Suncore – SuspAirBag/Bellows (Part No.255BW-15-R-PAIR)

SuspAirBag/Bellows

from

$189.99
SuspAirBag/Bellows

Arnott Air Suspension – Air Suspension Compressor – WABCO (Part No.P-2469)

Air Suspension Compressor - WABCO

from

$975.99
Arnott has teamed up directly with WABCO to supply you with the same OE part at a fraction of the dealer cost. These compressors are made by the same supplier used by BMW. Arnott now has the one-stop solution for those who prefer the original equipment. This same compressor assembly will cost you more than you care to pay at your local BMW dealership! This is just the compressor and dryer assembly. You will have to reuse your intake lines, mounting brackets, and plug. This new compressor comes with detailed instructions. This compressor is ONLY for vehicles equipped with rear only air suspension.

Product Features:
  • Exclusively for 00-06 BMW X5 (E53), 99-03 BMW 5-Series (E39), 02-08 BMW 7-Series (E65,E66)
  • Wabco Unit Same As OE
  • Reuse Intake Lines
  • Reuse Mounting Brackets And Plug
  • Includes Detailed Instructions
See More

Suncore – SuspUpKt (Part No.255BW-15-R-KIT)

SuspUpKt

from

$569.99
SuspUpKt

Suncore – Quick Strut Kit (Part No.2-55S15950-001)

Quick Strut Kit

from

$239.99
Quick Strut Kit

Suncore – Air Spring Kit (Part No.254BW-15-R-PAIR)

Air Spring Kit

from

$209.99
Air Spring Kit

Arnott Air Suspension – Air Spring (Part No.A-2738)

Air Spring

from

$187.99
Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Product Features:
  • Exclusively for BMW 5-series Wagons (E39) w/rear Leveling
  • Multi-ply Continental ContiTech air sleeve
  • Heavy-duty crimping rings
  • Custom-designed, high-impact resin bottom piston with a brass insert
  • Constructed to meet or exceed industry’s standards for quality, reliability and function
  • Replace in pairs
See More

Arnott Air Suspension – Air Spring (Part No.A-2737)

Air Spring

from

$187.99
Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Product Features:
  • Exclusively for BMW 5-series Wagons (E39) w/rear Leveling
  • Multi-ply Continental ContiTech air sleeve
  • Heavy-duty crimping rings
  • Custom-designed, high-impact resin bottom piston with a brass insert
  • Constructed to meet or exceed industry’s standards for quality, reliability and function
  • Replace in pairs
See More

Suncore – Air Bag (Part No.254BW-15-RL)

Air Bag

from

$94.99
Air Bag

Suncore – SuspAirBag/Bellows (Part No.255BW-15-RL)

SuspAirBag/Bellows

from

$94.99
SuspAirBag/Bellows

Suncore – SuspAirBag/Bellows (Part No.255BW-15-RR)

SuspAirBag/Bellows

from

$94.99
SuspAirBag/Bellows

Suncore – Air Bag (Part No.254BW-15-RR)

Air Bag

from

$94.99
Air Bag

Top Picks for 2001 BMW 540i Control Arms

Upgrade BMW 540is with top-quality Control Arms parts, including 6 OEM and aftermarket selections for your 2001 model.

MOOG – Control Arm Bushing (Part No.K200012)

Control Arm Bushing

from

$62.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Dorman – Suspension Control Arm (Part No.524-076)

Suspension Control Arm

from

$36.99
This suspension integral link is precision-engineered and rigorously tested to match the fit and function of the original equipment part on specific vehicles.

Product Features:
  • Direct replacement – this integral link fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using quality materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Control Arm (Part No.RP12487)

Control Arm

from

$329.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • OE replacement
  • Reduces vibration
  • Reduces tire wear
See More

Rare Parts – Control Arm (Part No.RP12488)

Control Arm

from

$289.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • OE replacement
  • Reduces vibration
  • Reduces tire wear
See More

Dorman – Suspension Control Arm (Part No.521-398)

Suspension Control Arm

from

$257.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Control Arm Bushing (Part No.RP19637)

Control Arm Bushing

from

$81.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

In-Demand Shocks and Struts for 2001 BMW 540is

Select from 6 premium Shocks and Struts parts for your 2001 BMW 540i, with prices ranging from $26.49 to $149.99.

MOOG – Strut Bellows (Part No.K90460)

Strut Bellows

from

$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Engineered to meet or exceed OE requirements
  • Incorporates proven design and engineering features
See More

KYB – Jounce Bumper and Bellows (Part No.SB108)

Jounce Bumper and Bellows

from

$37.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

KYB – Jounce Bumper and Bellows (Part No.SB110)

Jounce Bumper and Bellows

from

$26.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920117)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$149.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

Rare Parts – Strut Mount (Part No.RP17722)

Strut Mount

from

$119.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Prevents tire noise and vibration
See More

Rare Parts – Strut Mount (Part No.RP18876)

Strut Mount

from

$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Prevents tire noise and vibration
See More

Most Sold 2001 BMW 540i Suspension Hardware

Explore our best-selling BMW parts for the 2001 540i among 1 OEM and aftermarket options starting from $66.99.

Dorman – Suspension Knuckle Bushing (Part No.905-533)

Suspension Knuckle Bushing

from

$66.99
This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

FAQs for 2001 BMW 540i Suspension Parts

Which Suspension Parts are best-sellers for 2001 BMW 540is?

Out of 27 Suspension Parts that fit 2001 BMW 540is, the following parts are the top sellers:

What’s the price range for 2001 BMW 540i Suspension Parts?

Suspension Part prices for the 2001 BMW 540i start at $26.49 and go up to $975.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2001 BMW 540i?

The average price for Suspension Parts for the 2001 BMW 540i is $176.99. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other BMW 540i model years?

Yes, we currently carry Suspension Parts for 14 model years of BMW 540is between 1994 and 2023. Suspension Parts are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2017, 2003, 2002, 2000, and 1999.

What are the cheapest Suspension Parts for my 2001 BMW 540i?

The cheapest 2001 BMW 540i Suspension Parts we carry in stock are:

What are the top-rated Suspension Parts that fit the 2001 BMW 540i?

Out of 24 reviews by customers, our 2001 BMW 540i Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2001 BMW 540i and their top-rated products:

What types of Suspension Parts do you sell for my 2001 BMW 540i?

Can I get help with 2001 BMW 540i Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Suspension Parts and more.

What is your return policy for BMW 540i Suspension Parts?

Advance Auto Parts keeps returns simple. For new BMW 540i Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.