2001 Audi S4 Cooling and Climate Controls

Name: HVAC Blower Motor Resistor
Brand: Carquest Premium
SKU: RUA1528
Price: 569.99 USD

Below you will find various in-demand Audi Cooling and Climate Controls, components and accessories for your 2001 S4. Advance Auto Parts has popular S4 parts like Air Conditioning Parts, Engine Cooling Parts, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other S4 model years including 2014, 2015, 2016, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2001 Audi S4 Cooling and Climate Controls below and start saving instantly.

Popular 2001 Audi S4 Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

Blower Motors

Engine Cooling Fan Controllers

Radiator Fan Clutch

AC Compressor Without Clutch

Thermostats

Radiator Fan Motors

Air Blend Door Actuators

Coolant Reservoirs

Coolant Temperature Sensors

AC Evaporator Anti-Ice Sensors

AC Condenser Fan Motors

Heater Cores

Cabin Air Temperature Sensors

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Engine Coolant Pipe O-Rings

Blower Motor Resistors

Air Conditioning Relays

AC Line O-Rings

AC Evaporators

Engine Coolant Thermostat O-Rings

Radiator Fan Clutch Fan Blades

AC Caps and Valve Core Kits

Thermostat Housing Gaskets

Thermostat Housings

Thermostat Seals

Engine Auxiliary Water Pumps

Accumulator and Receiver Driers

AC Line O-Ring Kits

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

Water Pump Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Coolant Outlet Flanges

Heater Control Servos

HVAC Blower Motor Regulators

Thermal Switch (Universal Fan)

Engine Cooling Fan Switches

Radiator Fan Switches

Radiator Mount Brackets

Radiator Cap Tester Adapters

AC Compressor Seals

Thermostat – Optional Replacements

Water Distribution Pipes

HVAC Temperature Delay Relay Harness Connectors

Essential Cooling and Climate Controls for 2001 Audi S4s

from

$569.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$67.69

The Febi/Bilstein Engine Cooling Fan Blade is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$167.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$15.79

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$24.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$61.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Every ambient air temperature sensor is designed for durability, electrical performance and provides the proper output curve to prevent misreading.
Our temperature sensors are encased in high temperature housings which are designed to withstand harsh engine conditions to ensure long service life.
Robust design and high grade materials meet the stringent demands of today’s service professional

from

$0.86

Cooling Hose Flange Plug

from

$211.60

The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

OE Quality, reliability and service life
Reduction in noise
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
Water circulation pump can deliver as much as 800 liters per hour
Coolant pump can deliver more than 9,000 liters per hour

from

$159.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$26.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$27.22

The APA/URO Engine Cooling Thermo-Fan Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Corrosion resistant housings
Nickel-plated or brass terminals for superior conductivity
High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
Thermal switches matched to OEM temperatures to assure consistent performance

from

$225.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$419.16

Without Controller Save time, money and labor with Dorman’s A/C Condenser Fan Assembly. It comes ready to install as a complete assembly, eliminating the need to make separate purchases. Plus, our high quality engineering ensures optimal air flow and strength to prevent your vehicle from overheating. This assembly includes the fan motor, fan blade, and fan shroud. This is the fan that is controlled by the air conditioning system and not the fan that is controlled by the coolant temp thermo-fan switch. The fan motor is also available separately for some applications (see additional catalog entries in the A/C Condenser Fan Motor category for availability).

Product Features:

Motor, shroud and blade included
Plug and Play jumper harnesses included (where applicable)
Replacement helps sustain proper engine operation
Direct replacement for a proper fit every time

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$189.11

The APA/URO Thermostat Housing is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$112.64

Blower Motor Regulat

from

$3.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$172.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$47.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$10.49

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Metal where applicable
Quality construction for durability
Packaged in clear plastic for easy visibility and identification of all components
Application specific for this vehicle

from

$113.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$228.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$369.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$9.79

A/C Service Valve Co

from

$78.50

ACM is a supplier of Original Equipment quality climate control products. AKA: Thrust Sensor

from

$6.30

Water Distribution P

Upgrade your 2001 Audi S4 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2001 Audi S4, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Cooling and Climate Controls are key to keeping your S4 functioning at its best. At Advance Auto Parts, we offer a wide selection of 103 Cooling and Climate Controls for the 2001 Audi S4, designed to meet your needs without breaking the bank. From Air Conditioning Part replacements to Engine Cooling Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2001 Audi S4 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.86 to $522.99, with an average price of $99.80. Our 103 Cooling and Climate Controls in stock come from 31 trusted brands, so you’re sure to find the right part for your 2001 Audi S4 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Audi S4, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Factory Air, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Factory Air also bring quality to the table, with Cooling and Climate Controls available starting at $0.99, and at an average 4 stars rating. With 1,162 customer reviews and counting, our 2001 Audi S4 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Audi S4 is always ready to roll. We’re committed to providing you with everything you need to keep your S4 in top shape, all in one place. Start shopping confidently below for your 2001 Audi S4!

Best-Selling Air Conditioning Parts for 2001 Audi S4s

Enhance the driving experience in your Audi with 30 quality Air Conditioning Part components, starting at $0.99.

show more show less

from

$22.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$15.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$4.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$15.79

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$44.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$25.30

Air Conditioning O-Ring Kit

from

$407.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$113.99

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$67.10

The Vemo A/C Relay is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Made in Germany OE Quality
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications Q+ The Seal of Excellence
ALWAYS OEM QUALITY
ALWAYS MADE IN GERMANY

from

$39.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$32.99

New Standard Replacement A/C System Seal Kit, MT2622, L4 Engine

Product Features:

MT2622, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$522.99

As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$419.16

Motor, shroud and blade included
Plug and Play jumper harnesses included (where applicable)
Replacement helps sustain proper engine operation
Direct replacement for a proper fit every time

from

$369.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$314.59

A/C Compressor

from

$237.98

A/C EVAPORATOR

from

$228.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$225.99

from

$200.99

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

Delphi sensors are built to meet or exceed OE requirements and testing
Delphi has improved the OE design by plating the connectors to help prevent corrosion and failure commonly caused by internal and cable short circuits
Delphi’s OE design helps by preventing mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
Speed sensors maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection
Designed digital output for maximum signal to noise ratio

from

$159.99

from

$77.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$55.99

A/C Pressure Switch

from

$45.16

ABS Speed Sensor

from

$36.35

A/C Temp. Switch

from

$9.79

A/C Service Valve Co

from

$7.38

A/C Orifice Tube

from

$1.99

New Standard Replacement A/C Orifice Tube, V8 Engine

Product Features:

V8 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Most Popular 2001 Audi S4 Engine Cooling Parts

Customize your Audi with 58 Engine Cooling Parts products like Thermostats, Radiators, and Water Pumps, all priced under $299.74.

show more show less

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$11.99

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$2.49

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$228.99

Carquest Premium auxiliary water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$189.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$47.99

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$206.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$172.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$18.99

Electrical parts control all aspects of vehicles on the road today. Replacing these components when they are starting to fail will ensure your vehicle has maximum performance and fuel economy. This is why Rein Automotive electrical parts are application specific and match the design and function of the OE parts.

Product Features:

Tested to ensure maximum performance
Manufactured to strict engineering standards/specifications in materials and tolerances
Long life and durability
Made by the OE manufacturer

from

$29.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$33.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$9.49

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$151.54

Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

OE Quality, reliability and service life
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
CO²-reduction by optimized efficiency, speed control and reduced weight
Coverage of a wide hydraulic performance range
Reduced noise level

from

$167.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$27.99

The Febi Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$19.19

Water Temp. Sensor

from

$299.74

Built to meet the latest OE manufacturer-specified designs, Vemo Auxiliary Water Pumps are the best way to make sure you have the proper heat protection for the engine in your vehicle. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

OE Quality, reliability and service life
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
CO²-reduction by optimized efficiency, speed control and reduced weight
Coverage of a wide hydraulic performance range
Reduced noise level (especially for Hybrid and EV appl.)

from

$119.15

ACM Viscous Fan Drives offer the latest in engineering innovations, including fully modulating, cost-effective fan drives that control fan speed in direct proportion to engine cooling needs. ACM Viscous Fan Drives are the economical choice for efficiency, performance and quiet operation.

Product Features:

Fan operates only when required and at appropriate speed – Allowing for improved efficiency and possible fuel and horsepower savings of up to 6-10% over fixed fans.
Self-contained unit – No maintenance needed, nothing to service of maintain.
Improved temperature control and smooth, soft fan engagement – Allowing for extended engine, belt and accessory component life.
Bimetallic sensor – Senses heat exchanger air temperature for accurate fan engagement
No external controls required – Simplicity of design for improved reliability

from

$67.69

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$30.99

Matches OE form, fit and function
Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
Constructed with premium materials for durability
Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
Application specific for this vehicle

from

$39.72

Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:

OE quality and design
Maintenance-free, durable elements

from

$24.99

Matches OE form, fit and function
Made to exact resistance for this specific application
High quality construction for durability
Constructed to withstand an engine environment
Application specific for this vehicle

from

$16.11

The APA/URO Coolant Water Outlet is manufactured to OE Quality and has improved durability and resistance to heat and cracking.

Product Features:

Direct replacement for a proper fit every time
Hoses slide on for easy installation
High-quality plastic or metal construction

from

$293.79

Built to meet the latest OE manufacturer-specified designs, Rein Auxiliary Water Pumps are the best way to make sure you have the proper heat protection for the engine in your vehicle. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

OE Quality, reliability and service life
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
CO²-reduction by optimized efficiency, speed control and reduced weight
Coverage of a wide hydraulic performance range
Reduced noise level

from

$242.48

The Stribel Auxiliary Fan Control Unit is manufactured to OE specifications and is a direct fit replacement. The auxiliary fan control unit controls the cooling fans on your vehicle. Failure of this unit can cause your radiator cooling fans to not operate properly, leading to engine overheating and failure.

Product Features:

OE Quality and Direct Fit Application
Supplied with Factory Mounting and Connectors

from

$192.99

This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$190.07

The APA/URO Auxiliary Fan Control Unit is manufactured to OE specifications and is a direct fit replacement. The auxiliary fan control unit controls the cooling fans on your vehicle. Failure of this unit can cause your radiator cooling fans to not operate properly, leading to engine overheating and failure.

Product Features:

OE Quality and Direct Fit Application
Supplied with Factory Mounting and Connectors

from

$189.11

The APA/URO Thermostat Housing is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$172.99

Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$167.69

Radiator

from

$154.22

Auxiliary Water Pump

from

$131.99

Rein Automotive OE quality auxiliary water pumps are fabricated from original casting specifications to ensure proper fit for easy installation, proper water flow and maximum cooling. Auxiliary water pump use high-quality plastic or metal construction to ensure durability and long service life. Our auxiliary water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:

High-quality plastic or metal construction
Flow-rates matched to OE flow-rates
Includes the vibration isolators, mounting brackets and hardware where applicable for easy installation

from

$130.73

Auxiliary Fan Assemb

from

$89.99

Rein Automotive OE quality water pumps are designed to be direct replacements for OE water pumps and water pump assembles. Rein water pumps are made to original casting specifications to ensure proper fitments for easy installation, proper water flow and maximum cooling. Pumps include the necessary OE style gaskets and/or o-rings to replace the old worn out parts. Seals are made from a high quality silicate carbide compound. Bearings of OE design and materials are also used to meet or exceed OEM standards and ensure long service life. Our quality water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component. Please read and follow all enclosed instructions to maximize pump life and validate warranty.

Product Features:

Pump is produced with silicon carbide seals providing improved durability and service life
Pump uses OE designed bearings by ensuring to extend pumps service life
Read and follow all enclosed instructions to maximize pump life and to qualify for extended warranty

from

$88.52

The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:

All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.

from

$75.99

Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$62.99

from

$58.47

Fan Clutch

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$32.99

from

$32.49

Original equipment design provides exact fit and performance.

Product Features:

Precise fitting sealing edges prevent leakage and premature cooling.
Self-cleaning and self-aligning thermostat valve.
Stainless steel assembly and springs are engineered for long life and smooth performance.

from

$27.22

Corrosion resistant housings
Nickel-plated or brass terminals for superior conductivity
High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
Thermal switches matched to OEM temperatures to assure consistent performance

from

$13.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$10.49

Matches OE form, fit and function
Metal where applicable
Quality construction for durability
Packaged in clear plastic for easy visibility and identification of all components
Application specific for this vehicle

from

$8.79

Meets And/or exceeds OEM stAndard; Includes quality gasket or O-ring to ensure proper seal (where applicable; 100% virgin resin material to insure durability; 100% leak tested; Direct-fit replacement for ease of installation

Top Picks for 2001 Audi S4 Heating Parts

Upgrade Audi S4s with top-quality Heating Parts parts, including 5 OEM and aftermarket selections for your 2001 model.

show more show less

from

$175.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$53.87

ACM manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Meets or exceeds OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Provides exceptional reliability.

from

$142.93

Nissens manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Meets or exceeds OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Provides exceptional reliability.

from

$67.93

A/C Servo

from

$46.81

A/C Servo

In-Demand Blower Motor and Related Products for 2001 Audi S4s

Select from 5 premium Blower Motor and Related Products parts for your 2001 Audi S4, with prices ranging from $41.73 to $491.99.

show more show less

from

$491.99

HVAC Blower Motor Resistor

from

$260.54

Vemo manufactures a high quality replacement Blower Motor that meets or exceeds the vehicle manufacturer’s specifications for fit, durability and quality.

Product Features:

OE-Equivalent.
Direct Fit Replacement.
High quality OE electrical components.
OE quality brushes and bearings.
Balanced rotor assembly.

from

$154.12

Febi manufactures a high quality replacement Blower Motor that meets or exceeds the vehicle manufacturer’s specifications for fit, durability and quality.

Product Features:

OE-Equivalent.
Direct Fit Replacement.
High quality OE electrical components.
OE quality brushes and bearings.
Balanced rotor assembly.

from

$129.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$41.73

The Vemo Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:

Excellent electrical and thermal performance
Direct OE replacement
Built to strict quality control standards
100% tested

Most Sold 2001 Audi S4 Blend Doors

Explore our best-selling Audi parts for the 2001 S4 among 3 OEM and aftermarket options starting from $125.99.

show more show less

from

$186.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$135.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$125.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Top-Rated Cooling and Climate Controls Brands For Your 2001 Audi S4

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2001 Audi S4s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Factory Air, and more. Cooling and Climate Controls from these brands that fit a 2001 S4 start at just $0.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2001 Audi S4 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2001 Audi S4, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2001 Audi S4. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Carquest Premium 2001 Audi S4 Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2001 Audi S4 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2001 S4, Advance Auto Parts carries a full inventory of 26 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Audi in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $4.99 to $491.99, plus, with more than 239 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$29.99

This product is not rated

Coolant Temperature Sensor

“”

from
$44.99

This product is not rated

A/C Compressor Relay Connector

“”

from
$167.99

This product is not rated

Universal Fan Clutch – 5" Thermal Import/Compact

“”

FAQs for 2001 Audi S4 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2001 Audi S4s?

Out of 103 Cooling and Climate Controls that fit 2001 Audi S4s, the following parts are the top sellers:

Cap & Valve A/C System Seal Kit (15890310) – $17.99
A/C Severe Temp Automatic Adjusting Orifice Tube (18892178) – $15.99
Engine Coolant Reservoir Cap (5020080) – $11.99

What’s the price range for 2001 Audi S4 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2001 Audi S4 start at $0.86 and go up to $522.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2001 Audi S4?

The average price for Cooling and Climate Controls for the 2001 Audi S4 is $99.80. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Audi S4 model years?

Yes, we currently carry Cooling and Climate Controls for 25 model years of Audi S4s between 1992 and 2024. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2016, 2015, and 2014.

What are the cheapest Cooling and Climate Controls for my 2001 Audi S4?

The cheapest 2001 Audi S4 Cooling and Climate Controls we carry in stock are:

Cooling Hose Flange Plug (10792211) – $0.86
Green Round O-Ring (18890254) – $0.99
Green Round O-Ring (18890169) – $1.99
A/C Orifice Tube (11745065) – $1.99
Thermostat O-Ring (10748538) – $2.29

What are the top-rated Cooling and Climate Controls that fit the 2001 Audi S4?

Out of 1,162 reviews by customers, our 2001 Audi S4 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2001 Audi S4 and their top-rated products:

Engine Cooling Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Engine Coolant Reservoir Cap (5020080) – $11.99
- Engine Electric Water Pump: New, Plastic/Steel Housing (10244792) – $228.99

What types of Cooling and Climate Controls do you sell for my 2001 Audi S4?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2001 Audi S4:

Can I get help with 2001 Audi S4 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Cooling and Climate Controls and more.

What is your return policy for Audi S4 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Audi S4 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2001 Audi S4 Cooling and Climate Controls

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1528)

Febi – Bilstein Engine Cooling Fan Blade (Part No.G505056620FEB)

Carquest Premium – Universal Fan Clutch – 5" Thermal Import/Compact (Part No.215069)

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

Motorad – Standard Thermostat: 180 Degrees (Part No.304-180)

Carquest – Ambient Air Temperature Sensor (Part No.WT5735)

CRP – Cooling Hose Flange Plug (Part No.G202837841)

Pierburg – Auxiliary Water Pump (Part No.G3050551801APG)

Carquest Premium – A/C Clutch Relay (Part No.RAA2906)

Carquest Premium – A/C Accumulator (Part No.T33316)

APA/URO Parts – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030111776APA)

Carquest Premium – Engine Cooling Fan Resistor (Part No.RUC1678)

Dorman – A/C Condenser Fan Assembly (Part No.R1035700416DOR)

Felpro – O-RING (Part No.35763)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

APA/URO Parts – Thermostat Housing (Part No.G4010131393APA)

ACM – Blower Motor Regulat (Part No.R2041414651ACM)

Victor Reinz – Engine Coolant Thermostat Housing Seal (Part No.41-76149-00)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432598)

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-703)

Factory Air – Green Round O-Ring (Part No.24650)

Beck/Arnley – Water Pump Gasket (Part No.039-4141)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54909)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3208)

Carquest Standard – Reman Nippondenso 7SB16C Compressor w/ Clutch (Part No.DW77313)

Santech – A/C Service Valve Co (Part No.R1254946899SII)

ACM – A/C Pressure Switch (Part No.R1054395417ACM)

APA/URO Parts – Water Distribution P (Part No.G2027423695APA)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26767)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

Carquest Premium – A/C Yellow Orifice Tube (Part No.T38642)

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

Factory Air – Green Round O-Ring (Part No.24650)

Factory Air – Green Round O-Ring (Part No.24610)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

Santech – Air Conditioning O-Ring Kit (Part No.R1151317370SII)

Carquest Premium – A/C New, with Clutch, with 7SB16C Compressor (Part No.T78313)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54909)

Vemo – Q+ OE Quality A/C Relay (Part No.R114051274VMO)

Carquest Premium – A/C Accumulator (Part No.T83244)

KAI – A/C System Seal Kit (Part No.FTT010068)

DENSO – New Compressor With Clutch (Part No.471-1260)

Dorman – A/C Condenser Fan Assembly (Part No.R1035700416DOR)

Carquest Standard – Reman Nippondenso 7SB16C Compressor w/ Clutch (Part No.DW77313)

Autopart International Inc – A/C Compressor (Part No.R10003199793API)

Nissens – A/C EVAPORATOR (Part No.R1130324904NSS)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3208)

Carquest Premium – Engine Cooling Fan Resistor (Part No.RUC1678)

Delphi – ABS Wheel Speed Sensor (Part No.SS20039)

Carquest Premium – A/C Clutch Relay (Part No.RAA2906)

Carquest Premium – HVAC Pressure Switch (Part No.ABA1078)

Santech – A/C Pressure Switch (Part No.R105485786SII)

WSO – ABS Speed Sensor (Part No.N6030131159WSO)

Vemo – A/C Temp. Switch (Part No.R1055152191VMO)

Santech – A/C Service Valve Co (Part No.R1254946899SII)

Vemo – A/C Orifice Tube (Part No.R102739103VMO)

KAI – A/C Orifice Tube (Part No.FJC3114)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)

MAHLE Original – Engine Coolant Thermostat Housing Gasket (Part No.C31633)

Carquest Premium – Engine Electric Water Pump: New, Plastic/Steel Housing (Part No.T1171)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432554)

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-703)

Carquest Premium – Radiator (Part No.812974)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432598)

Rein – Temperature Sensor Kit (Part No.ELC0051P)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1007)

NTK – Engine Coolant Temperature Sensor (Part No.EF0079)

Motorad – Standard Thermostat: 170 Degrees (Part No.304-170)

Felpro – O-RING (Part No.35763)

Felpro – Multi-Purpose O-Ring (Part No.25589)

Bosch – Auxiliary Water Pump (Part No.G3050131896BOS)

Carquest Premium – Universal Fan Clutch – 5" Thermal Import/Compact (Part No.215069)

Febi – Engine Coolant Temperature Sensor (Part No.C602054108FEB)

Elth – Water Temp. Sensor (Part No.C6020111921ELT)

Vemo – Vemo Auxiliary Water Pump (Part No.G3050137733VMO)

ACM – Engine Cooling Fan Clutch (Part No.G501056619ACM)