2000 Toyota Tundra Air Suspension and Kits

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

SuspAirCmp

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:

• Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
• Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
• Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
• Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load
• Limited Lifetime Warranty

aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2007-2020 Toyota Tundra.. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

Shock Kit

aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2000-2006 Toyota Tundra.. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Fastest, Safest, Least Expensive Way To Bring The Front Of Your Vehicle Level With The Rear
• Strut Extension Will Maintain A Smooth OEM Ride Without Adding Pressure To Stock Suspension Components
• Toughest Finish. Safest Way To Level Lift
• Smart Strut Technology Mounts On Top Of The Strut Assembly, Eliminating The Hassle, Time And Danger Of Compressing Springs
• Installation Is Simple And Requires No Strut Preloading, Cutting, Or Modification Of Factory Installed Parts
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials

ReadyLift(R) OEM style rear block kits are now available for model specific applications. Based on OEM designs and never made out of light weight extrusions our 2 Inch GMC Sierra or Chevy Silverado Rear Blocks are made from cast iron and have Anti-Rotation ears built-In. Fits classic and new body style 6-lug model GM trucks. New model 2007-UP 2WD and 4WD Trucks with OEM 1.25 Inch blocks will want to take advantage of the additional 1 Inch of lift for towing and hauling, particularly when using a front leveling kit. This block is 2.25 Inch which when removing the factory 1.25 Inch block, results in an increased rear lift of 1 Inch. ReadyLift(R) Block Kits will put a slight rake back in your Truck for hauling or towing and are designed to work in concert with your ReadyLift(R) Suspension Leveling Kit.

Product Features:

• Made From Cast Iron/Not Light Weight Extrusions
• Built In Locator Pin/Not Pressed In
• Puts Rake Back In Your Truck For Towing/Hauling
• Installation Time Is About An Hour

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Fastest, Safest, Least Expensive Way To Bring The Front Of Your Vehicle Level With The Rear
• Strut Extension Will Maintain A Smooth OEM Ride Without Adding Pressure To Stock Suspension Components
• Toughest Finish. Safest Way To Level Lift
• Smart Strut Technology Mounts On Top Of The Strut Assembly, Eliminating The Hassle, Time And Danger Of Compressing Springs
• Installation Is Simple And Requires No Strut Preloading, Cutting, Or Modification Of Factory Installed Parts
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials

Looking to add larger tires or add that go anywhere capability and feel? Then look no further than a TrailFX mid-lift suspension kit. Increased ground clearance, visibility, and a smoother ride are all benefits of a mid-lift suspension kit.

Product Features:

• Designed For Additional Clearance For Larger Wheel And Tire Combinations
• All Necessary Components Included In One Box
• Maintains Factory Ride Quality
• Shock Replacement Not Required

ReadyLift(R) OEM style rear block kits are now available for model specific applications. Based on OEM designs and never made out of light weight extrusions our 2 Inch GMC Sierra or Chevy Silverado Rear Blocks are made from cast iron and have Anti-Rotation ears built-In. Fits classic and new body style 6-lug model GM trucks. New model 2007-UP 2WD and 4WD Trucks with OEM 1.25 Inch blocks will want to take advantage of the additional 1 Inch of lift for towing and hauling, particularly when using a front leveling kit. This block is 2.25 Inch which when removing the factory 1.25 Inch block, results in an increased rear lift of 1 Inch. ReadyLift(R) Block Kits will put a slight rake back in your Truck for hauling or towing and are designed to work in concert with your ReadyLift(R) Suspension Leveling Kit.

Product Features:

• Made From Cast Iron/Not Light Weight Extrusions
• Built In Locator Pin/Not Pressed In
• Puts Rake Back In Your Truck For Towing/Hauling
• Installation Time Is About An Hour

Max Performance Synthetic Power Steering Fluid

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Timbren suspension enhancement system The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway: A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll: During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride: By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesn’t Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)