2000 Saturn LS2 Belts and Hoses
Find Your Specific 2000 Saturn LS2 Belts and Hoses
Below you will find various in-demand Saturn Belts and Hoses, components and accessories for your 2000 LS2. Advance Auto Parts has popular LS2 parts like Heater Hoses, Serpentine and V Belts, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other LS2 model years. Select a category of 2000 Saturn LS2 Belts and Hoses below and start saving instantly.
Popular 2000 Saturn LS2 Belts and Hoses Categories
Essential Belts and Hoses for 2000 Saturn LS2s
Dayco – Dayco Automatic Belt Tensioner, 89286 (Part No.89286)
from
$67.99
Dayco No Slack Automatic Belt Tensioners are built to outperform and outlast competitive OE parts. This specific Dayco Automatic Belt Tensioner is manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension. The heavy duty cast aluminum spring case resists cracking and fatigue. Each component is built to resist rust, endure the toughest of conditions while promoting quieter performance and longer life.
See More
Gates – Gates DriveAlign Belt Drive Idler/Tensioner Pulley, 38009 (Part No.38009)
from
$27.99
Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length, 86500 (Part No.86500)
from
$13.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19"" Long, 1.31"" Diameter, D72134" (Part No.D72134)
from
$19.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060795 (Part No.K060795)
from
$47.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Carquest Standard – "Carquest Serpentine Belt: 79.5"" Long, 6 Rib Count, 795K6" (Part No.795K6)
from
$28.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 79.53 Long, 6 Rib Count, 5060795 (Part No.5060795)
from
$43.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 79.53 Long, 6 Rib Count, 795K6 (Part No.795K6)
from
$28.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 16 Inch Length, 87823 (Part No.87823)
from
$47.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length, 80412 (Part No.80412)
from
$35.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Premium Molded Heater Hose, 18204 (Part No.18204)
from
$25.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length, 87614 (Part No.87614)
from
$29.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length, 88455 (Part No.88455)
from
$23.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Idler Pulley, Dayco, 89051 (Part No.89051)
from
$24.79
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dorman – Dorman Idler Pulley (Pulley only), 419-603 (Part No.419-603)
from
$12.79
This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
See More
Litens – Litens Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter, 900027A (Part No.900027A)
from
$27.99
This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Gates – Gates Premium Molded Coolant Hose, 22473 (Part No.22473)
from
$44.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 6"" Long, 1.31"" Diameter, B72133" (Part No.B72133)
from
$14.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Upgrade your 2000 Saturn LS2 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2000 Saturn LS2, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Saturn or enhancing its overall performance, Belts and Hoses are key to keeping your LS2 functioning at its best. At Advance Auto Parts, we offer a wide selection of 18 Belts and Hoses for the 2000 Saturn LS2, designed to meet your needs without breaking the bank.
From
Heater Hose
replacements to
Serpentine and V Belts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2000 Saturn LS2 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $12.79 to $47.99, with
an average price of $30.22.
Our 18 Belts and Hoses in stock come from 6 trusted brands, so you’re sure to find the right part for your 2000 Saturn LS2 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Saturn LS2, we stock popular OEM and aftermarket Belts and Hoses from top names
like Litens, Dayco, Driveworks, and more.
Litens Belts and Hoses
start at just $27.99 and boast an impressive 4.7 stars average rating from customers.
Dayco and Driveworks also bring quality to the table, with Belts and Hoses available starting at $19.29, and at an average 4.5 stars rating.
With 166 customer reviews and counting, our 2000 Saturn LS2 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 Saturn LS2 is always ready to roll. We’re committed to providing you with everything you need to keep your LS2 in top shape, all in one place.
Start shopping confidently below for your 2000 Saturn LS2!
Best-Selling Heater Hoses for 2000 Saturn LS2s
Enhance the driving experience in your Saturn with 5 quality Heater Hose components, starting at $23.99.
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length, 80412 (Part No.80412)
from
$35.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length, 87614 (Part No.87614)
from
$29.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 16 Inch Length, 87823 (Part No.87823)
from
$47.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length, 88455 (Part No.88455)
from
$23.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Premium Molded Heater Hose, 18204 (Part No.18204)
from
$25.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Most Popular 2000 Saturn LS2 Serpentine and V Belts
Customize your Saturn with 5 Serpentine and V Belts products
like Serpentine Belts,
V-Belts, and
Drive Belt Idler Assemblies, all
priced under $47.99.
Dayco – Dayco Poly Rib Belt Serpentine Belt 79.53 Long, 6 Rib Count, 5060795 (Part No.5060795)
from
$43.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 79.53 Long, 6 Rib Count, 795K6 (Part No.795K6)
from
$28.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Idler Pulley, Dayco, 89051 (Part No.89051)
from
$24.79
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060795 (Part No.K060795)
from
$47.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Carquest Standard – "Carquest Serpentine Belt: 79.5"" Long, 6 Rib Count, 795K6" (Part No.795K6)
from
$28.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Top Picks for 2000 Saturn LS2 Belt Tensioners
Upgrade Saturn LS2s with top-quality Belt Tensioners parts, including 1 OEM and aftermarket selections for your 2000 model.
Dayco – Dayco Automatic Belt Tensioner, 89286 (Part No.89286)
from
$67.99
Dayco No Slack Automatic Belt Tensioners are built to outperform and outlast competitive OE parts. This specific Dayco Automatic Belt Tensioner is manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension. The heavy duty cast aluminum spring case resists cracking and fatigue. Each component is built to resist rust, endure the toughest of conditions while promoting quieter performance and longer life.
See More
In-Demand Radiator Hoses for 2000 Saturn LS2s
Select from 3 premium Radiator Hoses parts for your 2000 Saturn LS2, with prices ranging from $13.99 to $44.99.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 6"" Long, 1.31"" Diameter, B72133" (Part No.B72133)
from
$14.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length, 86500 (Part No.86500)
from
$13.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Premium Molded Coolant Hose, 22473 (Part No.22473)
from
$44.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Most Sold 2000 Saturn LS2 Engine Cooling Hoses
Explore our best-selling Saturn parts for the 2000 LS2 among 1 OEM and aftermarket options starting from $19.29.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19"" Long, 1.31"" Diameter, D72134" (Part No.D72134)
from
$19.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Top-Rated Belts and Hoses Brands For Your 2000 Saturn LS2
Shop for the best-rated brands offering Belts and Hoses and other products for your 2000 Saturn LS2s. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Driveworks, and more. Belts and Hoses from these brands that fit a 2000 LS2 start at just $19.29 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Litens 2000 Saturn LS2 Belts and Hoses
When it comes to maintaining or upgrading your 2000 Saturn LS2, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2000 Saturn LS2. With over 1 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $27.99. Plus, with over 49 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$27.99
(49)
Litens Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter, 900027A
“New pulley works great. It’s smooth and no more squeaking.”
Popular Dayco 2000 Saturn LS2 Belts and Hoses
Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2000 Saturn LS2 owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2000 LS2, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Saturn in peak condition while saving money because prices on these Dayco Belts and Hoses range from $19.29 to $67.99, plus, with more than 4 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$44.15
(2)
Dayco Automatic Belt Tensioner, 89286
“Tensioner was a perfect fit and worked great. Good price.”
from
$35.99
(1)
Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length, 80412
“A little longer than needed, but fits correctly after a little trimming… good value, too.”
from
$19.29
(1)
"Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19"" Long, 1.31"" Diameter, D72134"
“great product and seems to be a fair price”
FAQs for 2000 Saturn LS2 Belts and Hoses
Which Belts and Hoses are best-sellers for 2000 Saturn LS2s?
Out of 18 Belts and Hoses that fit 2000 Saturn LS2s, the following parts are the top sellers:
- Litens Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter, 900027A (10457820) – $27.99
- Driveworks Poly Rib Belt Serpentine Belt 79.53 Long, 6 Rib Count, 795K6 (20060078) – $28.99
- Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length, 87614 (19590267) – $29.99
What’s the price range for 2000 Saturn LS2 Belts and Hoses?
Belts and Hose prices for the 2000 Saturn LS2 start at $12.79 and go up to $47.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 2000 Saturn LS2?
The average price for Belts and Hoses for the 2000 Saturn LS2 is $30.22. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Belts and Hoses for my 2000 Saturn LS2?
The cheapest 2000 Saturn LS2 Belts and Hoses we carry in stock are:
- Dorman Idler Pulley (Pulley only), 419-603 (10040953) – $12.79
- Dayco Molded Heater Hose EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length, 86500 (19590219) – $13.99
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 6"" Long, 1.31"" Diameter, B72133" (19590656) – $14.49
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19"" Long, 1.31"" Diameter, D72134" (19590657) – $19.29
- Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length, 88455 (10149624) – $23.99
What are the top-rated Belts and Hoses that fit the 2000 Saturn LS2?
Out of 166 reviews by customers, our 2000 Saturn LS2 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2000 Saturn LS2 and their top-rated products:
- Serpentine and V Belts
- Driveworks Poly Rib Belt Serpentine Belt 79.53 Long, 6 Rib Count, 795K6 (20060078) – $28.99
- Dayco Poly Rib Belt Serpentine Belt 79.53 Long, 6 Rib Count, 5060795 (19270624) – $43.99
- Idler Pulley, Dayco, 89051 (15130060) – $24.79
- Belt Tensioners
- Driveworks Poly Rib Belt Serpentine Belt 79.53 Long, 6 Rib Count, 795K6 (20060078) – $28.99
- Dayco Poly Rib Belt Serpentine Belt 79.53 Long, 6 Rib Count, 5060795 (19270624) – $43.99
- Idler Pulley, Dayco, 89051 (15130060) – $24.79
What types of Belts and Hoses do you sell for my 2000 Saturn LS2?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 2000 Saturn LS2:
Can I get help with 2000 Saturn LS2 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Saturn Belts and Hoses and more.
What is your return policy for Saturn LS2 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Saturn LS2 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
