2000 Pontiac Grand Prix Flywheels

Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

LuK rigid flywheels, a smart alternative to resurfacing,�offer a smooth, flat surface crucial for proper clutch operation, are engineered and manufactured to OE specifications, and are dynamically balanced to eliminate vibration and increase clutch performance

Hays heavy-duty flexplates for high performance and competition engines are constructed of a thicker than stock steel plate, enabling them to withstand the stress of high-stall torque converters and high-RPM engines. While factory stock plates tend to crack around the crankshaft hub when punished under high torque and RPM conditions, the thicker Hays flexplate handles the force. These H.D. flexplates are supplied with a ring gear that is securely welded in place and feature dual bolt patterns for use with either a Powerglide or Turbo-Hydromatic torque converter. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and are SFI certified under specification 29.1.

Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.

Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.

Lakewood Power Train, RM-901. PERFORMANCE PARTS>PERFORMANCE DRIVELINE>TRANSMISSION PART>TRANSMISSION PARTS from Lakewood

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

As performance levels increase, an O.E. style flex plate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high-performance flex plate designed for GM 1997-up 4.8L, 5.3L, 5.7L & 6.0L LS engines with 6-bolt crankshaft flange, including 2010-15 Camaro with the L99 engine. Features include high tensile strength steel construction to resist elongation and cracking, 10.75 and 11.06-inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification ensuring the ultimate in safety and performance. The assembly is finished with Zinc plating and Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI-approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles, or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Note: Will not fit 1999-00 6.0L applications with 0.400 inch extended crank flange/flat flex plate or 1999-00 4.8L engines that originally came with a manual transmission. A flex plate spacer is required for retrofitting Non-LS era transmissions to LS engines.

As performance levels increase, an O.E. style flex plate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flex plate designed for 1955-1985 400ci small block chevy V8 engines (externally balanced) with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5-inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

ATP M/T FLYWHEEL, Z-291. DRIVELINE – CLUTCHES>CLUTCH KITS, HYDRAULICS & PARTS>CLUTCH PARTS>FLYWHEELS from ATP

LuK rigid flywheels, a smart alternative to resurfacing,�offer a smooth, flat surface crucial for proper clutch operation, are engineered and manufactured to OE specifications, and are dynamically balanced to eliminate vibration and increase clutch performance

Lakewood Power Train, RM-925. PERFORMANCE PARTS>PERFORMANCE DRIVELINE>TRANSMISSION PART>TRANSMISSION PARTS from Lakewood

Upgrade your stock flywheel to a Hays SFI-approved billet steel or aluminum flywheel. Each flywheel is precision machined and engineered to handle extreme duty applications along with being designed to take the punishment of today’s high horsepower street, off-road, and race engines.

Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.

Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.

Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.

Lakewood Power Train, RM-920. PERFORMANCE PARTS>PERFORMANCE DRIVELINE>TRANSMISSION PART>TRANSMISSION PARTS from Lakewood

Lakewood Power Train, RM-902. PERFORMANCE PARTS>PERFORMANCE DRIVELINE>TRANSMISSION PART>TRANSMISSION PARTS from Lakewood

Lakewood Power Train, RM-930. PERFORMANCE PARTS>PERFORMANCE DRIVELINE>TRANSMISSION PART>TRANSMISSION PARTS from Lakewood

Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Lakewood Power Train, RM-922. PERFORMANCE PARTS>PERFORMANCE DRIVELINE>TRANSMISSION PART>TRANSMISSION PARTS from Lakewood