2000 Ottawa YT30 Fuel and Emissions Systems
More 2000 Ottawa YT30 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2000 Ottawa YT30, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2000 Ottawa YT30 Fuel and Emissions Systems
Carquest Premium – Fuel/Water Separator Spin-on with Sensor Port, Drain and Reusable Sensor (Part No.86965)
from
$87.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
- Includes Sensor Port Thread: M14 x 2.0
- CAUTION: Furnished D-Ring must be installed on post for seal.
Delphi – Fuel Injector (Part No.EX631767)
from
$439.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX631063)
from
$145.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX634762)
from
$724.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX630781)
from
$359.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX63811BE)
from
$367.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX63807BA)
from
$353.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Carquest Premium – Remanufactured Fuel Injector (Part No.AD85131)
from
$497.99
Product Features:
See More
- Each unit is 100% tested to OE specifications
- Includes all new premium quality o-rings and seals
- Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
Delphi – Fuel Injector (Part No.EX631763)
from
$439.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX631056)
from
$141.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX63808BB)
from
$353.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX631766)
from
$439.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX639349)
from
$359.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX634763)
from
$735.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX631061)
from
$150.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX63809BC)
from
$356.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX634761)
from
$700.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX639350)
from
$373.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Carquest Premium – Remanufactured Fuel Injector (Part No.AD85111)
from
$512.99
Product Features:
See More
- Each unit is 100% tested to OE specifications
- Includes all new premium quality o-rings and seals
- Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
Popular 2000 Ottawa YT30 Fuel and Emissions Systems Categories
2000 Ottawa YT30 Fuel and Emissions Systems
You count on your 2000 Ottawa YT30 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 5 Fuel and Emissions Systems ranging in price from $87.99 to $373.99, you’re sure to find everything you need for your 2000 Ottawa YT30.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 2 different brands like Carquest Premium and Delphi. 2000 Ottawa YT30 Fuel and Emissions Systems start as low as $87.99!
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2000 Ottawa YT30 below to get started!
FAQs for 2000 Ottawa YT30 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2000 Ottawa YT30?
Out of 5 Fuel and Emissions Systems for the 2000 Ottawa YT30, the most popular in our inventory are:
from
$87.99
This product is not rated
Fuel/Water Separator Spin-on with Sensor Port, Drain and Reusable Sensor
Fuel and Water Separators
