2000 Mercury Villager Valve Cover and Cylinder Heads

The Edelbrock #60255 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60255 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-th

Product Features:

• Complete Single For Hydraulic Roller
• 60cc Combustion Chamber Volume
• 190cc Intake/60cc Exhaust Runner Volume
• 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
• 0.625 in. Deck Thickness

The Edelbrock No. 60075 Performer RPM cylinder head is designed for use with 1961-76 390-427-428 Ford applications. Edelbrock Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

• All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
• All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
• All threads and machined surfaces are and repaired with technology that exceeds the original metal
• Non-sealing iron surfaces painted to prevent oxidization

The Edelbrock #5027 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex

Product Features:

• Complete Pair For Mechanical and Hydraulic Flat Tappet
• 60cc Combustion Chamber Volume
• 205cc Intake/62cc Exhaust Runner Volume
• 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
• 0.625 in. Deck Thickness

The Edelbrock No. 5028 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised exhaust ports and larger diameter springs for higher lift camshafts, making them ideal for a spec series racer and larger displacement engines. The Edelbrock No. 5028 E-Street Cylinder heads also have as-cast ports and maintain the stock exhaust port location, making them compatible with OEM headers and hardware.

Product Features:

• Material: Aluminum
• Grade Type: Performance
• Quantity: Set of 2
• Guide Plate Material: Hardened Steel
• Horsepower: 400-525 HP
• Seat Angle: Exhaust 45 deg/Intake 45 deg
• Intake Valve Diameter: 2.08 in
• Intake Runner Volume: 205 cc
• Push Rod Diameter: (Suggested) 0.3125 in
• Rocker Stud Diameter: 0.375 in
• Valve Angle: 20 Degree
• Valve Spring Diameter:1.46 in
• Valve Spring Maximum Lift: 0.575 in
• Valve Stem Diameter: 0.3438 in

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

• All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
• All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
• All threads and machined surfaces are and repaired with technology that exceeds the original metal
• Non-sealing iron surfaces painted to prevent oxidization

The Edelbrock #60259 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60259 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-th

Product Features:

• Out-of-the-Box Bolt-On Performance
• Maximum Performance From Idle through Mid-Range
• Intake Valves Are For Use w/Stock Pistons
• Designed For Non-Emissions

50 state street legal aluminum cylinder head. Out-of-the-box bolt-on performance. Intake valves are used for stock pistons.

Product Features:

• 50-State Street Legal Aluminum Cylinder Head
• Out-of-the-Box Bolt-On Performance
• Intake Valves Are For Use w/Stock Pistons

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

• All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
• All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
• All threads and machined surfaces are and repaired with technology that exceeds the original metal
• Non-sealing iron surfaces painted to prevent oxidization

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
• Validated for fit, form and function
• Unsurpassed quality you can trust

Product Features:

• Highest Quality Head Bolts
• Cold-Formed/Heat Treated
• Ensures Molecular Integrity
• Reduced Diameter Bolt Heads
• Hardened/Parallel-Ground Washers Included
• Rated At 170000 psi
• Manufactured By ARP

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

• High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
• Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
• Rated At 180,000 Psi Tensile Strength
• High Performance Head Bolts Are Stronger

The Edelbrock No. 8502 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate the need for valve train removal to facilitate cylinder head re-torqueing. Hardened and parallel-ground washers are included.

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

• High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
• Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
• Rated At 180,000 Psi Tensile Strength
• High Performance Head Bolts Are Stronger

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:

• Gasket bore – 4.030 inch: Compressed thickness – .040 inch
• Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
• Optimized sealing embossments seals extreme cylinder pressure
• Provides excellent stability and reduces cylinder bore distortion.
• Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
• Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
• For high-performance street, drag race and oval track use

Mr. Gasket Embossed Steel Shim Cylinder Head Gaskets are for high performance street machines, drag racing and oval track racing. This is a very unique design that has a solid metal on metal fold at the combustion seal. This fold makes for a very stout seal that is almost the equivalent of a higher-end MLS (multi-layer steel) gasket with a gas stopper layer, but at a much lower cost. This gasket also has embossments around the coolant and oil passages and has a thick aluminum flake coating. All of these features result in a steel shim head gasket that handles extreme cylinder pressures very well. It’s probably the best steel shim head gasket you could ask for. Sold individually.

Product Features:

• Embossed steel with aluminum flake coating
• Solid metal over metal fold at the combustion seal
• Embossed seals at coolant and oil passages
• Approximately .020″ compressed thickness
• For high performance street, drag race and oval track use.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Dana engineering-approved for fit, form and function
• Meets or exceeds OE specifications

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• PermaTorque head gaskets meets or exceeds all original equipment specifications
• Validated for fit, form, and function

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• PermaTorque head gaskets meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Requires no retorquing of the head bolts
• Manufactured for the repair environment
• Validated for fit, form, and function
• Unsurpassed quality you can trust

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Manufactured for the repair environment
• Unsurpassed quality you can trust
• Unsurpassed quality you can trust