2000 Mercury Mountaineer Air Intakes
Find Your Specific 2000 Mercury Mountaineer Air Intakes
Below you will find various in-demand Mercury Air Intakes, components and accessories for your 2000 Mountaineer. Advance Auto Parts has popular Mountaineer parts like Throttle Bodies & Carb Parts Intake Manifold Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Mountaineer model years including
2002,
2003,
2004,
2005,
2006,
2007,
2008,
2009,
2010 and more. Select a category of 2000 Mercury Mountaineer Air Intakes below and start saving instantly.
Popular 2000 Mercury Mountaineer Air Intakes Categories
Essential Air Intakes for 2000 Mercury Mountaineers
NTK – Throttle Position Sensor (Part No.TH0262)
from
$157.99
The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.
Product Features:
See More
Product Features:
- OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.
Motorcraft – Original Equipment (O.E.) Potentiometer – Engine Throttle (Part No.DY-967)
from
$135.99
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.
Product Features:
See More
Product Features:
- Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
- The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
- The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
- Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
- Designed for long service life under harsh under-hood conditions.
- Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
- Designed with OE electrical connectors ensuring proper fits.
Carquest Premium – Throttle Position Sensor (Part No.ECC1017)
from
$45.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Edelbrock – Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887 (Part No.8728)
from
$191.99Product Features:
- Fiber Laminate Spacers
- Provide Heat Insulation Between Upper and Lower
- Creates Cooler/Denser Charge
- Raise Intake 0.5in. For More Valve Cover Clearance
- Includes all Necessary Hardware for Installation
Carquest – Air Charge Temperature Sensor (Part No.31A1019)
from
$24.99
The Air Charge Temperature Sensor provides an input to the vehicles computer as to the temperature of the air entering the engine via the air cleaner assembly. The engine computer uses this input to control many operating conditions which in turn provides optimal engine operation, engine performance and clean tailpipe emissions.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1173)
from
$22.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1084)
from
$23.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-14054-00)
from
$5.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
MAHLE Original – Fuel Injection Throttle Body Mounting Gasket (Part No.G31745)
from
$4.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61057)
from
$15.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61208)
from
$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Idemitsu – Type TLS Automatic Transmission Fluid, 1 Quart (Part No.30040093-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Dorman – Plastic Intake Manifold – Includes Gaskets (Part No.615-775)
from
$302.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – tested to ensure top-quality OEM performance and durability
- Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
- Trustworthy design – built by the industry leader in aftermarket manifolds
Autotecnica – Intake Manifold (Part No.FD1414477)
from
$233.99
Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications and covered by an impressive two-year, unlimited mileage warranty, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.
See More
Dorman – Plastic Intake Manifold – Includes Gaskets (Part No.615-175)
from
$254.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – tested to ensure top-quality OEM performance and durability
- Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
- Trustworthy design – built by the industry leader in aftermarket manifolds
Delphi – Fuel Injection Idle Air Control Valve (Part No.CV10112)
from
$126.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
- Provides superior fit resulting in an easier installations
- Maximizes fuel and engine efficiency
Delphi – Fuel Injection Idle Air Control Valve (Part No.CV10118)
from
$73.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
- Provides superior fit resulting in an easier installations
- Maximizes fuel and engine efficiency
- Manufactured and engineered with premium quality and stringent standards eliminating potential for malfunctions
Mr. Gasket – Intake Manifold Bolts (Part No.958G)
from
$22.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers
Product Features:
See More
Product Features:
- Hex Head
- Zinc Plated
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Edelbrock – Intake replacement base and upper plenum gasket for #2945 & #3887 (Part No.7232)
Dorman – Upper Intake Manifold Gasket Set: 23 Piece Set (Part No.615-175GA)
from
$59.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97181)
from
$32.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 96123)
from
$28.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Holley – SysteMAX; Intake Manifold Gasket (Part No.108-80)
from
$56.99
Kormetal gasket used between the SysteMax II Ford 5.0 liter upper and lower manifolds.
Product Features:
See More
Product Features:
- SysteMAX II Upper/Lower Manifold
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90890)
from
$26.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 96687-1)
from
$21.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 96123-1)
from
$39.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 95952)
from
$45.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 96281)
from
$57.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Upgrade your 2000 Mercury Mountaineer with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 2000 Mercury Mountaineer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Air Intakes are key to keeping your Mountaineer functioning at its best. At Advance Auto Parts, we offer a wide selection of 18 Air Intakes for the 2000 Mercury Mountaineer, designed to meet your needs without breaking the bank.
From
Throttle Bodies & Carb Part
replacements to
Intake Manifold Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2000 Mercury Mountaineer at great prices.
Our Air Intakes inventory for this model
ranges from just $5.99 to $191.99, with
an average price of $47.89.
Our 18 Air Intakes in stock come from 10 trusted brands, so you’re sure to find the right part for your 2000 Mercury Mountaineer without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Mercury Mountaineer, we stock popular OEM and aftermarket Air Intakes from top names
like Idemitsu, FELPRO, Holley, and more.
Idemitsu Air Intakes
start at just $14.49 and boast an impressive 4.9 stars average rating from customers.
FELPRO and Holley also bring quality to the table, with Air Intakes available starting at $26.99, and at an average 4.6 stars rating.
With 18 customer reviews and counting, our 2000 Mercury Mountaineer Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 Mercury Mountaineer is always ready to roll. We’re committed to providing you with everything you need to keep your Mountaineer in top shape, all in one place.
Start shopping confidently below for your 2000 Mercury Mountaineer!
Best-Selling Throttle Bodies & Carb Parts for 2000 Mercury Mountaineers
Enhance the driving experience in your Mercury with 8 quality Throttle Bodies & Carb Part components, starting at $5.99.
Delphi – Fuel Injection Idle Air Control Valve (Part No.CV10118)
from
$73.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
- Provides superior fit resulting in an easier installations
- Maximizes fuel and engine efficiency
- Manufactured and engineered with premium quality and stringent standards eliminating potential for malfunctions
Carquest Premium – Throttle Position Sensor (Part No.ECC1017)
from
$45.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
NTK – Throttle Position Sensor (Part No.TH0098)
from
$42.99
The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.
Product Features:
See More
Product Features:
- OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.
Motorcraft – Original Equipment (O.E.) Potentiometer – Engine Throttle (Part No.DY-967)
from
$135.99
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.
Product Features:
See More
Product Features:
- Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
- The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
- The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
- Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
- Designed for long service life under harsh under-hood conditions.
- Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
- Designed with OE electrical connectors ensuring proper fits.
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61081)
from
$5.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61057)
from
$15.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Delphi – Throttle Position Sensor (Part No.SS10387)
from
$45.99
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
Product Features:
See More
Product Features:
- Delphi sensors are built to meet or exceed OE requirements and testing
- Not impacted by temperature changes and provide robust, long-lasting sensor protection
- Designed digital output for maximum signal to noise ratio
Carquest Premium – Throttle Position Sensor (TPS) (Part No.ECA1805)
from
$44.99
The engine control module (ECM) requires multiple sensor inputs to perform the needed system operations. The Throttle Position Sensor (TPS) provides the computer the needed input for exact throttle plate position for ignition timing, injection pulse width, transmission shift control along with several other system operations. Carquest Premium throttle position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured with high quality materials, industry-leading electronic components and strict quality controls
- Superior sealing protecting sensor from moisture and temperature extremes
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Most Popular 2000 Mercury Mountaineer Intake Manifold Parts
Customize your Mercury with 10 Intake Manifold Parts products
like Intake Manifold Gasket Sets,
Intake Manifolds, and
Intake Manifold Bolt Sets, all
priced under $191.99.
Idemitsu – Type TLS Automatic Transmission Fluid, 1 Quart (Part No.30040093-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 95952)
from
$45.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90890)
from
$26.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Holley – SysteMAX; Intake Manifold Gasket (Part No.108-80)
from
$56.99
Kormetal gasket used between the SysteMax II Ford 5.0 liter upper and lower manifolds.
Product Features:
See More
Product Features:
- SysteMAX II Upper/Lower Manifold
Mr. Gasket – Intake Manifold Bolts (Part No.958G)
from
$22.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers
Product Features:
See More
Product Features:
- Hex Head
- Zinc Plated
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1084)
from
$23.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Edelbrock – Intake replacement base and upper plenum gasket for #2945 & #3887 (Part No.7232)
Carquest – Air Charge Temperature Sensor (Part No.31A1019)
from
$24.99
The Air Charge Temperature Sensor provides an input to the vehicles computer as to the temperature of the air entering the engine via the air cleaner assembly. The engine computer uses this input to control many operating conditions which in turn provides optimal engine operation, engine performance and clean tailpipe emissions.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Edelbrock – Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887 (Part No.8728)
from
$191.99Product Features:
- Fiber Laminate Spacers
- Provide Heat Insulation Between Upper and Lower
- Creates Cooler/Denser Charge
- Raise Intake 0.5in. For More Valve Cover Clearance
- Includes all Necessary Hardware for Installation
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1173)
from
$22.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Top-Rated Air Intakes Brands For Your 2000 Mercury Mountaineer
Shop for the best-rated brands offering Air Intakes and other products for your 2000 Mercury Mountaineers. Below you’ll find some of our best rated Air Intakes from Idemitsu, FELPRO, and Holley, and more. Air Intakes from these brands that fit a 2000 Mountaineer start at just $14.49 and are rated as high as 4.9 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular Idemitsu 2000 Mercury Mountaineer Air Intakes
When it comes to maintaining or upgrading your 2000 Mercury Mountaineer, using quality Air Intakes is essential to ensure durability and a perfect fit. Idemitsu ticks all of those boxes. We offer a wide selection of Idemitsu Air Intakes, specifically designed for the 2000 Mercury Mountaineer. With over 1 Idemitsu brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49. Plus, with over 2 customer reviews and an average rating of 4.9 stars, you can trust that our Idemitsu Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular FELPRO 2000 Mercury Mountaineer Air Intakes
FELPRO auto parts is one of the highest quality Air Intake brands in the market. Any 2000 Mercury Mountaineer owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2000 Mountaineer, Advance Auto Parts carries a full inventory of 2 FELPRO Air Intakes. Plus you will be keeping your Mercury in peak condition while saving money because prices on these FELPRO Air Intakes range from $26.99 to $45.99, plus, with more than 11 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.
FAQs for 2000 Mercury Mountaineer Air Intakes
Which Air Intakes are best-sellers for 2000 Mercury Mountaineers?
Out of 18 Air Intakes that fit 2000 Mercury Mountaineers, the following parts are the top sellers:
- Throttle Position Sensor (12424525) – $45.99
- Type TLS Automatic Transmission Fluid, 1 Quart (11872369) – $14.49
- Throttle Position Sensor (12222882) – $42.99
What’s the price range for 2000 Mercury Mountaineer Air Intakes?
Air Intake prices for the 2000 Mercury Mountaineer start at $5.99 and go up to $191.99 for the most premium parts.
What’s the average price of a Air Intake for a 2000 Mercury Mountaineer?
The average price for Air Intakes for the 2000 Mercury Mountaineer is $47.89. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Mercury Mountaineer model years?
What are the cheapest Air Intakes for my 2000 Mercury Mountaineer?
The cheapest 2000 Mercury Mountaineer Air Intakes we carry in stock are:
- Fuel Injection Throttle Body Mounting Gasket (15780210) – $5.99
- Type TLS Automatic Transmission Fluid, 1 Quart (11872369) – $14.49
- Fuel Injection Throttle Body Mounting Gasket (15780635) – $15.49
- Intake Manifold Bolts (17360287) – $22.99
- Intake replacement base and upper plenum gasket for #2945 & #3887 (22342065) – $22.99
What are the top-rated Air Intakes that fit the 2000 Mercury Mountaineer?
Out of 18 reviews by customers, our 2000 Mercury Mountaineer Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2000 Mercury Mountaineer and their top-rated products:
- Intake Manifold Parts
- INTAKE MANIFOLD GASKET SET (15180002) – $45.99
- Engine Intake Manifold Gasket Set (15780429) – $26.99
- Type TLS Automatic Transmission Fluid, 1 Quart (11872369) – $14.49
- Throttle Bodies & Carb Parts
- INTAKE MANIFOLD GASKET SET (15180002) – $45.99
- Engine Intake Manifold Gasket Set (15780429) – $26.99
- Type TLS Automatic Transmission Fluid, 1 Quart (11872369) – $14.49
What types of Air Intakes do you sell for my 2000 Mercury Mountaineer?
As of 11/2/25, these are some of the most in-demand types of Air Intakes for a 2000 Mercury Mountaineer:
Can I get help with 2000 Mercury Mountaineer Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Air Intakes and more.
What is your return policy for Mercury Mountaineer Air Intakes?
Advance Auto Parts keeps returns simple. For new Mercury Mountaineer Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
