2000 Land Rover Range Rover Cooling and Climate Controls

Essential 2000 Land Rover Range Rover Cooling and Climate Controls

Carquest Premium – Integrated Thermostat Housing: Gasket Included (Part No.85961)

Integrated Thermostat Housing: Gasket Included

from

$149.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% virgin resin material to insure durability
  • 100% leak tested
  • Direct-fit replacement for ease of installation
  • Includes quality thermostat
See More

Motorad – Integrated Thermostat Housing: 192 Degrees (Part No.766-192)

Integrated Thermostat Housing: 192 Degrees

from

$56.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39158)

A/C Block Type O-Ring Expansion Valve

from

$31.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Rein – Expansion Tank (Part No.G1030170803RIN)

Expansion Tank

from

$94.50
The Rein Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the virgin plastic construction prevents coolant fluid loss.

Product Features:
  • Includes Sensor and OE Cap (if applicable)
  • Produced from virgin plastic meeting/exceeding OE specifications, ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
See More

Carquest Premium – A/C Pressure Transducer Connector (Part No.PTA1151)

A/C Pressure Transducer Connector

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Eurospares – Heater Core O-Ring (Part No.R3001163690ESP)

Heater Core O-Ring

from

$5.75
Heater Core O-Ring

Carquest Premium – Universal Reverse Rotation Severe Duty Thermal Fan Clutch (Part No.216039)

Universal Reverse Rotation Severe Duty Thermal Fan Clutch

from

$77.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1200)

Engine Water Pump: New, Gasket/Seals Included

from

$125.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

KAI – A/C Receiver Drier (Part No.ACM010157)

A/C Receiver Drier

from

$14.99
New Standard Replacement A/C Receiver Drier

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Condenser (Part No.714852)

A/C Condenser

from

$422.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Nissens – Radiator (Part No.G10002498627NSS)

Radiator

from

$378.17
Radiator

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA2873)

Multi Purpose Relay

from

$62.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

APA/URO Parts – Water Temperature Sender (Part No.P403650869APA)

Water Temperature Sender

from

$10.52
A.P.A.URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components. Referred to as ‘temp transducer’ in factory film located in/on thermostat housing – has a single male spade terminal
See More

FAE – Water Temperature Sender (Part No.P403641687FAE)

Water Temperature Sender

from

$22.00
Water Temperature Sender

Carquest Premium – New Compressor with Clutch, Sanden/Sankyo PXC16 (Part No.T198501)

New Compressor with Clutch, Sanden/Sankyo PXC16

from

$644.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Endurance tested the equivalent of 50k miles
  • Includes specific electrical connector to eliminate splicing
  • Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
  • For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car
  • Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance
See More

Carquest Standard – Reman Nippondenso 10S17C Compressor w/ Clutch (Part No.DW97349)

Reman Nippondenso 10S17C Compressor w/ Clutch

from

$253.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Bosch – Starter Relay (Part No.P20622259906BOS)

Starter Relay

from

$18.87
Starter Relay

Wehrle – Relay (Part No.P2020105781WEH)

Relay

from

$15.17
Relay

Carquest Premium – New Compressor with Clutch, Nippondenso 10PA17C (Part No.T78392)

New Compressor with Clutch, Nippondenso 10PA17C

from

$449.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Endurance tested the equivalent of 50k miles
  • Includes specific electrical connector to eliminate splicing
  • Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
  • For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car
  • Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance
See More

DENSO – New Compressor With Clutch (Part No.471-1360)

New Compressor With Clutch

from

$404.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC2183)

Coolant Temperature Sensor with O-Ring

from

$25.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0086)

Engine Coolant Temperature Sensor

from

$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Calorstat – Expansion Tank Cap (Part No.G104043852CAL)

Expansion Tank Cap

from

$10.51
The Calorstat Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10238)

Engine Coolant Reservoir Cap

from

$9.79
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

2000 Land Rover Range Rover Cooling and Climate Controls

You count on your 2000 Land Rover Range Rover to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 35 Cooling and Climate Controls ranging in price from $5.75 to $431.99, you’re sure to find everything you need for your 2000 Land Rover Range Rover.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 15 different brands like Permatex, Carquest Premium, and DriveWorks. 2000 Land Rover Range Rover Cooling and Climate Controls start as low as $5.75!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 1,194 extensive product reviews on 2000 Land Rover Range Rover Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Engine Coolant Reservoir Cap with 1.0 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2000 Land Rover Range Rover below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2000 Land Rover Range Rover

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2000 Land Rover Range Rover running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, DriveWorks, and even more.

Popular Permatex Cooling and Climate Controls

You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 2000 Land Rover Range Rover back on the road. Some of the top-rated Permatex products in these categories are:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets

Top-Rated Cooling and Climate Controls


If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 2000 Land Rover Range Rover, and some of our most reviewed parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2000 Land Rover Range Rover Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2000 Land Rover Range Rover?

Out of 35 Cooling and Climate Controls for the 2000 Land Rover Range Rover, the most popular in our inventory are:
Water Pump: New, Installation Gasket Included
from $96.99
(3)
Water Pump: New, Installation Gasket Included
Water Pumps
A/C Compressor Relay Connector
from $44.99
This product is not rated
A/C Compressor Relay Connector
AC Compressor Cut-Out Relay Harness Connectors
Universal Reverse Rotation Severe Duty Thermal Fan Clutch
from $77.99
This product is not rated
Universal Reverse Rotation Severe Duty Thermal Fan Clutch
Radiator Fan Clutch

What are the top-rated 2000 Land Rover Range Rover Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2000 Land Rover Range Rover based on customer reviews/ratings are:
Engine Coolant Reservoir Cap
from $21.99
(1)
Engine Coolant Reservoir Cap
“This does not fit the expansion tank at all. The item that does is a special order expansion tank cap.”