2000 Land Rover Discovery Exhaust Parts
Find Your Specific 2000 Land Rover Discovery Exhaust Parts
Below you will find various in-demand Land Rover Exhaust Parts, components and accessories for your 2000 Discovery. Advance Auto Parts has popular Discovery parts like Exhaust Pipes, Exhaust System Kits, Exhaust Gaskets and more. You’ll also find aftermarket and OEM Exhaust Parts for other Discovery model years including
1994,
1995,
1996,
1997,
1998,
1999 and more. Select a category of 2000 Land Rover Discovery Exhaust Parts below and start saving instantly.
Popular 2000 Land Rover Discovery Exhaust Parts Categories
Essential Exhaust Parts for 2000 Land Rover Discoveries
MagnaFlow – California Grade Carb Compliant Universal Catalytic Converter (Part No.445004)
from
$603.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445004. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
MagnaFlow – Standard Grade Federal / Epa Compliant Universal Catalytic Converter (Part No.53005)
from
$106.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53005. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
Walker – CalCat CARB Universal Catalytic Converter 2" Inlet (ID) 2" Outlet (ID) (Part No.81916)
from
$1012.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat universal catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
Product Features:
See More
Product Features:
Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.81712)
from
$916.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat universal catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
Product Features:
See More
Product Features:
Walker – Ultra EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (Part No.93236)
from
$172.99
Product Features:
See More
- EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
MagnaFlow – California Grade Carb Compliant Universal Catalytic Converter (Part No.445005)
from
$603.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445005. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
Walker – CalCat CARB Universal Catalytic Converter 2" Inlet (ID) 2" Outlet (ID) (Part No.83506)
from
$436.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat universal catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA,┬áCO,┬áNY and other states┬árequiring┬áCARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
Victor Reinz – Exhaust Manifold Gasket (Part No.71-35527-00)
from
$3.49
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Able to withstand temperatures of up to 1400 Deg. F.
- Durable against wear and tear between manifolds and cylinder heads.
- Ensures an effective seal as manifold flanges warp in extreme conditions.
Victor Reinz – Exhaust Manifold Gasket (Part No.71-35532-00)
from
$8.29
Whether you are a professional technician or a skilled do-it-yourselves, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Able to withstand temperatures of up to 1400 degrees F.
- Durable against wear and tear between manifolds and cylinder heads.
- Ensures an effective seal as manifold flanges warp in extreme conditions.
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10362-01)
from
$42.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
MagnaFlow – Touring Series Cat-Back Performance Exhaust System (Part No.16888)
from
$851.99
The MagnaFlow 1999-2004 Land Rover Discovery Touring Series Cat-Back Performance Exhaust System is the perfect partner for your 4.0L, 4.6L 1999-2004 Land Rover Discovery to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips. 16888 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Land Rover Discovery exhaust system is compatible with 1999-2004 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Land Rover Discovery like a glove. 16888 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Mandrel bent tubing
- Increased Horsepower and Torque
- 409 Stainless Steel Construction
BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.210-815)
from
$194.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle–while the interior design of the muffler box ensures quiet performance.
Product Features:
See More
Product Features:
- Based on the original OEM design for a guaranteed perfect fit
- No welds inside the silencer
- Easy installation
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- External drain hole extends muffler life by allowing moisture to escape
- Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
BRExhaust – Exhaust Direct-Fit Muffler Assembly (Part No.211-083)
from
$359.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle-while the interior design of the muffler box ensures quiet performance.
Product Features:
See More
Product Features:
- Based on the original OEM design for a guaranteed perfect fit
- No welds inside the silencer
- Easy installation
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- External drain hole extends muffler life by allowing moisture to escape
- Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
Upgrade your 2000 Land Rover Discovery with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2000 Land Rover Discovery, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Land Rover or enhancing its overall performance, Exhaust Parts are key to keeping your Discovery functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Exhaust Parts for the 2000 Land Rover Discovery, designed to meet your needs without breaking the bank.
From
Exhaust Pipe
replacements to
Exhaust System Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2000 Land Rover Discovery at great prices.
Our Exhaust Parts inventory for this model
ranges from just $8.29 to $1,012.99, with
an average price of $461.68.
Our 12 Exhaust Parts in stock come from 4 trusted brands, so you’re sure to find the right part for your 2000 Land Rover Discovery without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Land Rover Discovery, we stock popular OEM and aftermarket Exhaust Parts from top names
like Walker MagnaFlow, and more.
Walker Exhaust Parts
start at just $172.99 and boast an impressive 4.2 stars average rating from customers.
With 18 customer reviews and counting, our 2000 Land Rover Discovery Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 Land Rover Discovery is always ready to roll. We’re committed to providing you with everything you need to keep your Discovery in top shape, all in one place.
Start shopping confidently below for your 2000 Land Rover Discovery!
Best-Selling Exhaust Pipes for 2000 Land Rover Discoveries
Enhance the driving experience in your Land Rover with 1 quality Exhaust Pipe components, starting at $359.99.
BRExhaust – Exhaust Direct-Fit Muffler Assembly (Part No.211-083)
from
$359.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle-while the interior design of the muffler box ensures quiet performance.
Product Features:
See More
Product Features:
- Based on the original OEM design for a guaranteed perfect fit
- No welds inside the silencer
- Easy installation
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- External drain hole extends muffler life by allowing moisture to escape
- Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
Most Popular 2000 Land Rover Discovery Exhaust System Kits
Customize your Land Rover with 1 Exhaust System Kits products
like Exhaust System Kits, all
priced under $851.99.
MagnaFlow – Touring Series Cat-Back Performance Exhaust System (Part No.16888)
from
$851.99
The MagnaFlow 1999-2004 Land Rover Discovery Touring Series Cat-Back Performance Exhaust System is the perfect partner for your 4.0L, 4.6L 1999-2004 Land Rover Discovery to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips. 16888 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Land Rover Discovery exhaust system is compatible with 1999-2004 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Land Rover Discovery like a glove. 16888 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Mandrel bent tubing
- Increased Horsepower and Torque
- 409 Stainless Steel Construction
Top Picks for 2000 Land Rover Discovery Exhaust Gaskets
Upgrade Land Rover Discoveries with top-quality Exhaust Gaskets parts, including 2 OEM and aftermarket selections for your 2000 model.
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10362-01)
from
$42.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Victor Reinz – Exhaust Manifold Gasket (Part No.71-35532-00)
from
$8.29
Whether you are a professional technician or a skilled do-it-yourselves, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Able to withstand temperatures of up to 1400 degrees F.
- Durable against wear and tear between manifolds and cylinder heads.
- Ensures an effective seal as manifold flanges warp in extreme conditions.
In-Demand Catalytic Converters for 2000 Land Rover Discoveries
Select from 8 premium Catalytic Converters parts for your 2000 Land Rover Discovery, with prices ranging from $172.99 to $1,012.99.
Walker – Ultra EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (Part No.93236)
from
$172.99
Product Features:
See More
- EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
MagnaFlow – Hm Grade Federal / Epa Compliant Universal Catalytic Converter (Part No.99205HM)
from
$194.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.81712)
from
$916.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat universal catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
Product Features:
See More
Product Features:
MagnaFlow – Oem Grade Federal / Epa Compliant Universal Catalytic Converter (Part No.51205)
from
$211.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
Walker – CalCat CARB Universal Catalytic Converter 2" Inlet (ID) 2" Outlet (ID) (Part No.81916)
from
$1012.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat universal catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
Product Features:
See More
Product Features:
MagnaFlow – Hm Grade Federal / Epa Compliant Direct-Fit Catalytic Converter (Part No.93689)
from
$725.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93689. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2002 Land Rover Discovery 4.0L & 2003-2004 Land Rover Discovery 4.6L. MagnaFlow 93689 includes (1) Torca Clamp. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
MagnaFlow – California Grade Carb Compliant Universal Catalytic Converter (Part No.445004)
from
$603.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445004. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
Walker – CalCat CARB Universal Catalytic Converter 2" Inlet (ID) 2" Outlet (ID) (Part No.83506)
from
$436.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat universal catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA,┬áCO,┬áNY and other states┬árequiring┬áCARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
Top-Rated Exhaust Parts Brands For Your 2000 Land Rover Discovery
Shop for the best-rated brands offering Exhaust Parts and other products for your 2000 Land Rover Discoveries. Below you’ll find some of our best rated Exhaust Parts from Walker and MagnaFlow, and more. Exhaust Parts from these brands that fit a 2000 Discovery start at just $172.99 and are rated as high as 4.2 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Walker 2000 Land Rover Discovery Exhaust Parts
When it comes to maintaining or upgrading your 2000 Land Rover Discovery, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 2000 Land Rover Discovery. With over 1 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $172.99. Plus, with over 11 customer reviews and an average rating of 4.2 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$172.99
(11)
Ultra EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID)
“Used this on my 98 silverado and I suggest for any one to get mega clamp exhaust it work the best no exhaust leak, no engine light passed emission te”
Popular MagnaFlow 2000 Land Rover Discovery Exhaust Parts
MagnaFlow auto parts is one of the highest quality Exhaust Part brands in the market. Any 2000 Land Rover Discovery owner should feel confident when installing genuine MagnaFlow parts in their vehicle. To ensure the best fit and performance for your 2000 Discovery, Advance Auto Parts carries a full inventory of 1 MagnaFlow Exhaust Parts. Plus you will be keeping your Land Rover in peak condition while saving money because prices on these MagnaFlow Exhaust Parts range up to $194.99, plus, with more than 5 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$194.99
(5)
Hm Grade Federal / Epa Compliant Universal Catalytic Converter
“needs to be cut to fit my application but worked great”
FAQs for 2000 Land Rover Discovery Exhaust Parts
Which Exhaust Parts are best-sellers for 2000 Land Rover Discoveries?
Out of 12 Exhaust Parts that fit 2000 Land Rover Discoveries, the following parts are the top sellers:
- Exhaust Direct-Fit Muffler Assembly (20291995) – $359.99
- Oem Grade Federal / Epa Compliant Universal Catalytic Converter (10605383) – $211.99
- Hm Grade Federal / Epa Compliant Direct-Fit Catalytic Converter (10193623) – $725.99
What’s the price range for 2000 Land Rover Discovery Exhaust Parts?
Exhaust Part prices for the 2000 Land Rover Discovery start at $8.29 and go up to $1,012.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2000 Land Rover Discovery?
The average price for Exhaust Parts for the 2000 Land Rover Discovery is $461.68. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Land Rover Discovery model years?
What are the cheapest Exhaust Parts for my 2000 Land Rover Discovery?
The cheapest 2000 Land Rover Discovery Exhaust Parts we carry in stock are:
- Exhaust Manifold Gasket (12547890) – $8.29
- Exhaust Manifold Gasket Set (12547576) – $42.99
- Ultra EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (20200250) – $172.99
- Hm Grade Federal / Epa Compliant Universal Catalytic Converter (22315796) – $194.99
- Oem Grade Federal / Epa Compliant Universal Catalytic Converter (10605383) – $211.99
What types of Exhaust Parts do you sell for my 2000 Land Rover Discovery?
As of 6/2/26, these are some of the most in-demand types of Exhaust Parts for a 2000 Land Rover Discovery:
Can I get help with 2000 Land Rover Discovery Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Land Rover Exhaust Parts and more.
What is your return policy for Land Rover Discovery Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Land Rover Discovery Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
