2000 Isuzu Trooper Belts and Hoses

Name: Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia.
Brand: Dayco
SKU: 81041
Price: 14.99 USD
Rating: 3.0 (8 reviews)

Below you will find various in-demand Isuzu Belts and Hoses, components and accessories for your 2000 Trooper. Advance Auto Parts has popular Trooper parts like Heater Hoses, Pulleys, Radiator Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Trooper model years including 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002 and more. Select a category of 2000 Isuzu Trooper Belts and Hoses below and start saving instantly.

Popular 2000 Isuzu Trooper Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 2000 Isuzu Troopers

from

$14.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$25.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$59.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$72.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner is another Dayco product proudly made in the USA

from

$50.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$32.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$27.49

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$43.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$17.79

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$19.49

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$3.29

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which extends the service life.
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$38.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$45.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
Replacement of the tensioner is recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$27.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all OEM specifications
Replacement of the tensioner is recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$25.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$31.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specially designed to resist collapse in a vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; knitted synthetic fiber reinforcement; EPDM lid resistant to heat, ozone and chemical refrigerants
Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transportation applications.

from

$16.29

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for increased leak resistance
Their great flexibility makes installation easy
Maximum vehicle coverage with minimum inventory
Heat, oil and ozone resistant
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$41.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. This Heavy duty Steel pulley is 70mm O.D. and comes with an I.D. reduction bearing. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$21.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
Original equipment quality suitable for virtually all domestic and import vehicles in today’s fleet
Bearings meet or exceed OE standards with application-specific speed and load requirements to withstand high temperatures under the hood
High-end bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation in harsh conditions

from

$37.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$31.49

This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Installation instructions included.

from

$85.99

Litens Automotive is the original equipment supplier for this Toyota idler pulley. This replacement pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. The pulley was designed by Litens for Toyota and Lexus V-8 4.7L/4.3L/4.0L vehicles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance.
Installation instructions included.
Running surface designed and engineered for proper belt tracking.

from

$36.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$7.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$30.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$27.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Upgrade your 2000 Isuzu Trooper with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2000 Isuzu Trooper, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Isuzu or enhancing its overall performance, Belts and Hoses are key to keeping your Trooper functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Belts and Hoses for the 2000 Isuzu Trooper, designed to meet your needs without breaking the bank. From Heater Hose replacements to Pulleys upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2000 Isuzu Trooper at great prices. Our Belts and Hoses inventory for this model ranges from just $13.99 to $72.99, with an average price of $34.75. Our 16 Belts and Hoses in stock come from 5 trusted brands, so you’re sure to find the right part for your 2000 Isuzu Trooper without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Isuzu Trooper, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens Dayco, and more. Litens Belts and Hoses start at just $31.49 and boast an impressive 4.7 stars average rating from customers. With 1,224 customer reviews and counting, our 2000 Isuzu Trooper Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Isuzu Trooper is always ready to roll. We’re committed to providing you with everything you need to keep your Trooper in top shape, all in one place. Start shopping confidently below for your 2000 Isuzu Trooper!

Best-Selling Heater Hoses for 2000 Isuzu Troopers

Enhance the driving experience in your Isuzu with 2 quality Heater Hose components, starting at $13.99.

show more show less

from

$14.29

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$13.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Most Popular 2000 Isuzu Trooper Pulleys

Customize your Isuzu with 4 Pulleys products like Idler Pulleys and Belt Tensioner Pulleys, all priced under $34.99.

show more show less

from

$31.49

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Installation instructions included.

from

$32.99

This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material and tolerances, specifications and meets performance and durability requirements. The Litens replacement part is constructed of heavy duty steel for long life and trouble free performance Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
Heavy Duty Steel Pulley
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$34.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$27.99

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements to withstand high temperatures under the hood
High-end bearings eliminate bearing noise
Mounting hardware included for some common applications
Reliable operation in harsh conditions

Top Picks for 2000 Isuzu Trooper Radiator Hoses

Upgrade Isuzu Troopers with top-quality Radiator Hoses parts, including 2 OEM and aftermarket selections for your 2000 model.

show more show less

from

$20.29

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$17.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

In-Demand Belt Tensioners for 2000 Isuzu Troopers

Select from 1 premium Belt Tensioners parts for your 2000 Isuzu Trooper.

show more show less

from

$72.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner is another Dayco product proudly made in the USA

Most Sold 2000 Isuzu Trooper Serpentine and V Belts

Explore our best-selling Isuzu parts for the 2000 Trooper among 4 OEM and aftermarket options starting from $27.49.

show more show less

from

$32.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$41.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$27.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$45.49

The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
Replacement of the tensioner is recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Top-Rated Belts and Hoses Brands For Your 2000 Isuzu Trooper

Shop for the best-rated brands offering Belts and Hoses and other products for your 2000 Isuzu Troopers. Below you’ll find some of our best rated Belts and Hoses from Litens and Dayco, and more. Belts and Hoses from these brands that fit a 2000 Trooper start at just $20.29 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 2000 Isuzu Trooper Belts and Hoses

When it comes to maintaining or upgrading your 2000 Isuzu Trooper, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2000 Isuzu Trooper. With over 2 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.49, with an average price of just $32.24. Plus, with over 6 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $31.49

(5)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

“Works perfectly! The old one was squeaking and it was time to be replaced.”

from $32.99

(1)

Idler/Tensioner Pulley: Direct Fit, Steel, 82mm Diameter

“This was the best replacement idler that I could find for my truck. Ordering online and store pickup worked perfectly.”

Popular Dayco 2000 Isuzu Trooper Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2000 Isuzu Trooper owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2000 Trooper, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Isuzu in peak condition while saving money because prices on these Dayco Belts and Hoses range from $20.29 to $41.99, plus, with more than 358 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $32.99

(88)

Idler Pulley, Dayco

“great item”

from $20.29

(2)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.44" Diameter

“Direct fit”

from $41.99

(268)

Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count

“Strong durable belt”

FAQs for 2000 Isuzu Trooper Belts and Hoses

Which Belts and Hoses are best-sellers for 2000 Isuzu Troopers?

Out of 16 Belts and Hoses that fit 2000 Isuzu Troopers, the following parts are the top sellers:

Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (12025532) – $27.49
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.25" Long, 1.50" Diameter (5190037) – $31.99
Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (15130064) – $72.99

What’s the price range for 2000 Isuzu Trooper Belts and Hoses?

Belts and Hose prices for the 2000 Isuzu Trooper start at $13.99 and go up to $72.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2000 Isuzu Trooper?

The average price for Belts and Hoses for the 2000 Isuzu Trooper is $34.75. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Isuzu Trooper model years?

Yes, we currently carry Belts and Hoses for 17 model years of Isuzu Troopers between 1984 and 2002. Belts and Hoses are bought most frequently for the following model years: 2002, 2001, 1999, 1998, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Belts and Hoses for my 2000 Isuzu Trooper?

The cheapest 2000 Isuzu Trooper Belts and Hoses we carry in stock are:

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 Inch Length (15590078) – $13.99
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8 Inch Length (15590079) – $14.29
Molded Heater Hose; EPDM Rubber, 1/2 Inch Diameter, 12 Inch Length (19590175) – $17.99
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.44" Diameter (19590110) – $20.29
Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (12025532) – $27.49

What are the top-rated Belts and Hoses that fit the 2000 Isuzu Trooper?

Out of 1,224 reviews by customers, our 2000 Isuzu Trooper Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2000 Isuzu Trooper and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (19270602) – $41.99
- Idler Pulley, Dayco (5160000) – $32.99
- Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (12025532) – $27.49
Radiator Hoses
- Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (19270602) – $41.99
- Idler Pulley, Dayco (5160000) – $32.99
- Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (12025532) – $27.49

What types of Belts and Hoses do you sell for my 2000 Isuzu Trooper?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 2000 Isuzu Trooper:

Can I get help with 2000 Isuzu Trooper Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Isuzu Belts and Hoses and more.

What is your return policy for Isuzu Trooper Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Isuzu Trooper Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Isuzu Trooper Belts and Hoses

Dayco – Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia. (Part No.81041)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1.25" Diameter (Part No.C70687)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89311)

Dayco – Automatic Belt Tensioner (Part No.89211)

Dayco – Idler Pulley, Dayco (Part No.89015)

Dayco – Idler Pulley, Dayco (Part No.89027)

Dayco – Idler Pulley, Dayco (Part No.89036)

Gates – Premium Molded Heater Hose (Part No.18020)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.80400)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28410)

Dayco – Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (Part No.5040378)

Gates – Micro-V Serpentine Drive Belt (Part No.K060802)

Gates – Micro-V Serpentine Drive Belt (Part No.K040320)

Gates – Premium Molded Coolant Hose (Part No.21591)

Gates – Premium Molded Coolant Hose (Part No.20355)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25302)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter (Part No.900198A)

Dayco – Idler Pulley, Dayco (Part No.89001)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38001)

Dayco – Idler Pulley, Dayco (Part No.89050)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900031A)

Litens – Idler Pulley: Direct Fit, Steel, 70mm Diameter (Part No.900678A)

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 8 1/4 Inch Length (Part No.86800)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length (Part No.80411)

Gates – Premium Molded Heater Hose (Part No.18301)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 16 Inch Length (Part No.88358)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8 Inch Length (Part No.87749)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 Inch Length (Part No.87748)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900031A)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 82mm Diameter (Part No.900025A)

Dayco – Idler Pulley, Dayco (Part No.89148)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38008)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.44" Diameter (Part No.D71665)

Dayco – Molded Heater Hose; EPDM Rubber, 1/2 Inch Diameter, 12 Inch Length (Part No.80394)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89311)

Dayco – Idler Pulley, Dayco (Part No.89015)

Dayco – Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (Part No.5060900)

Driveworks – Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (Part No.900K6)

Gates – Micro-V Serpentine Drive Belt (Part No.K060802)