2000 International 2674 Fuel and Emissions Systems
More 2000 International 2674 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2000 International 2674, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2000 International 2674 Fuel and Emissions Systems
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86406)
from
$41.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Application engineered media which aids in stripping water in diesel fuels
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- Includes Standpipe
- CAUTION: Furnished D-Ring must be installed on post for seal.
Carquest Premium – Fuel Spin-on with Drain (Part No.86405)
from
$27.49
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
- CAUTION: Furnished D-Ring must be installed on post for seal.
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86412)
from
$84.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Application engineered media which aids in stripping water in diesel fuels
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- Includes Integral Post Seal. Sensor Port Thread: 1/2-20
Carquest Premium – Truck Locking Fuel Cap (Part No.10423)
from
$118.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Manufactured from durable, long-life materials
- Independently tested for emission control
- Passes all state and federal emissions tests
- Reduces air pollution with proper sealing and venting
Carquest Premium – Heavy Duty Fuel Cap: 10601, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10601)
from
$48.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Injection Pressure Regulator (IPR) Valve (Part No.AC20082)
from
$232.99
Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.
Product Features:
See More
Product Features:
- Original equipment fit, form and function
- Manufactured to precise OE performance specifications
Cardone – Injection Pressure Regulating Valve (Part No.2V-230)
from
$438.99
CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.
Product Features:
See More
Product Features:
- Built and 100% tested to perform like the original, with all standard wear items replaced
- Air decay tested to ensure on-car performance
- Designed for easy installation and setup
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Cardone – Injection Pressure Regulating Valve (Part No.2V-231)
from
$427.99
CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.
Product Features:
See More
Product Features:
- Built and 100% tested to perform like the original, with all standard wear items replaced
- Air decay tested to ensure on-car performance
- Designed for easy installation and setup
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Delphi – Fuel Injector (Part No.EX63812BF)
from
$353.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD85011)
from
$292.99
CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes 100% new nozzle to ensure precise fuel delivery under all operating parameters
- Includes 100% replacement of solenoid to ensure precise fuel injection timing
- Includes 100% replacement of plunger and barrel to improve longevity over competitive units
- Includes all new premium quality O-rings and seals
- Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
Delphi – Fuel Injector (Part No.EX631756)
from
$476.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Dorman – HD Solutions – Fuel Tank Strap (Part No.578-5102)
from
$131.99
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
- Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
- Durable construction – manufactured from quality materials for superior service and reliability
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Dorman – HD Solutions – Fuel Primer Pump (Part No.904-7925)
from
$31.49
This diesel primer pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this diesel primer pump is designed to match the fit and function of the original pump on specified applications
- Restores functionality – reliable replacement for an original pump that has failed, causing hard or no-start conditions
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – HD Solutions – Ambient Air Pressure Sensor (Part No.904-7126)
from
$126.99
This barometric pressure sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this barometric pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
- Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
- Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – HD Solutions – Injector O-Ring Kit (Part No.904-8053)
from
$88.99
The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.
Product Features:
See More
Product Features:
- Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
- Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – HD Solutions – Air Inlet Manifold Pressure Sensor (Part No.904-7033)
from
$128.99
This manifold absolute pressure sensor is designed to match the function of an original sensor on specified vehicles, and to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage.
Product Features:
See More
Product Features:
- Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
- Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Popular 2000 International 2674 Fuel and Emissions Systems Categories
2000 International 2674 Fuel and Emissions Systems
You count on your 2000 International 2674 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 13 Fuel and Emissions Systems ranging in price from $31.49 to $539.99, you’re sure to find everything you need for your 2000 International 2674.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 4 different brands like Dorman, Carquest Premium, and Cardone. 2000 International 2674 Fuel and Emissions Systems start as low as $31.49!
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2000 International 2674 below to get started!
FAQs for 2000 International 2674 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2000 International 2674?
Out of 13 Fuel and Emissions Systems for the 2000 International 2674, the most popular in our inventory are:
from
$84.99
This product is not rated
Fuel/Water Separator Spin-on with Drain
Fuel and Water Separators
