2000 Honda Accord Oxygen Sensor
Your 2000 Honda Accord might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Oxygen Sensor product you desperately need.
We currently carry 24 Oxygen Sensor products to choose from for your 2000 Honda Accord, and our inventory prices range from as little as $43.99 up to $357.68.
On top of low prices, Advance Auto Parts offers 4 different trusted brands of Oxygen Sensor products for the 2000 Honda Accord. We only sell parts from trusted brands like Bosch so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 5,462 reviews on our Oxygen Sensor products for the 2000 Honda Accord from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Oxygen Sensor stock in-person!
Oxygen Sensor for Your 2000 Honda Accord
Search through our amazing selection of Oxygen Sensor products for your 2000 Honda Accord to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
DENSO - Oxygen Sensor: 4 Wire, 20.28" Long, Heated, Exact Fit (Part No. 234-4621)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would buy this product again.
I would buy this product again.
Submitted 2023-04-22
By Brian
From Asheville, NC
This product worked seamlessly to correct the issue I had with my vehicle.
Bottom Line recommended
-
exact fit
exact fit
Submitted 2022-02-10
By wanderer
From Maryland
Be careful when ordering, there were three different sensors listed with the only notable difference being the electrical connector
Bottom Line recommended
-
I would buy this product again.
I would buy this product again.
Submitted 2022-01-18
By Hay you
From Nabob,WI
Direct fit, but connector tang was in wrong place, so I just cut it out.
Bottom Line NULL
from $59.99
View Product -
DENSO - Oxygen Sensor: Upstream, 4 Wire, 17.32" Long, Heated, Exact Fit (Part No. 234-4727)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would buy this product again.
I would buy this product again.
Submitted 2023-04-22
By Brian
From Asheville, NC
This product worked seamlessly to correct the issue I had with my vehicle.
Bottom Line recommended
-
exact fit
exact fit
Submitted 2022-02-10
By wanderer
From Maryland
Be careful when ordering, there were three different sensors listed with the only notable difference being the electrical connector
Bottom Line recommended
-
I would buy this product again.
I would buy this product again.
Submitted 2022-01-18
By Hay you
From Nabob,WI
Direct fit, but connector tang was in wrong place, so I just cut it out.
Bottom Line NULL
from $88.99
View Product -
DENSO - Oxygen Sensor: 4 Wire, 11.42" Long, Heated, Exact Fit (Part No. 234-4620)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would buy this product again.
I would buy this product again.
Submitted 2023-04-22
By Brian
From Asheville, NC
This product worked seamlessly to correct the issue I had with my vehicle.
Bottom Line recommended
-
exact fit
exact fit
Submitted 2022-02-10
By wanderer
From Maryland
Be careful when ordering, there were three different sensors listed with the only notable difference being the electrical connector
Bottom Line recommended
-
I would buy this product again.
I would buy this product again.
Submitted 2022-01-18
By Hay you
From Nabob,WI
Direct fit, but connector tang was in wrong place, so I just cut it out.
Bottom Line NULL
from $109.99
View Product -
Bosch - Oxygen Sensor: 4 Wire, 30.71" Long, Heated, Exact Fit (Part No. 13071)
DescriptionBosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Read 3 review(s)Review snapshot ® by PowerReviews
-
would buy aGAIN
would buy aGAIN
Submitted 2017-07-27
By courtney
From undisclosed
good service
Bottom Line NULL
-
Easy to install; Great Sensor
Easy to install; Great Sensor
Submitted 2010-12-09
By BucketMouthBandit
From Kentucky
I installed this O2 Sensor in less than 30 minutes. Check engine light went off right away. Gas mileage greatly improved. I would highly recommend this sensor.
Bottom Line recommended
-
Perfect fit - easy to install
Perfect fit - easy to install
Submitted 2010-09-09
By Kevinator
From Ottawa ON
Simple, easy to install. It worked right away - check engine light disappeared. Excellent product.
Bottom Line recommended
from $59.99
View Product -
Bosch - Bosch Oxygen Sensor (Part No. C501085636BOS)
DescriptionThe Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
- Fine particle filter. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
Read 3 review(s)Review snapshot ® by PowerReviews
-
would buy aGAIN
would buy aGAIN
Submitted 2017-07-27
By courtney
From undisclosed
good service
Bottom Line NULL
-
Easy to install; Great Sensor
Easy to install; Great Sensor
Submitted 2010-12-09
By BucketMouthBandit
From Kentucky
I installed this O2 Sensor in less than 30 minutes. Check engine light went off right away. Gas mileage greatly improved. I would highly recommend this sensor.
Bottom Line recommended
-
Perfect fit - easy to install
Perfect fit - easy to install
Submitted 2010-09-09
By Kevinator
From Ottawa ON
Simple, easy to install. It worked right away - check engine light disappeared. Excellent product.
Bottom Line recommended
from $58.28
View Product -
Bosch - Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No. 15730)
DescriptionBosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Read 3 review(s)Review snapshot ® by PowerReviews
-
REQUIRES MODIFICATIONS TO THE ORIGINAL CONNECTOR
REQUIRES MODIFICATIONS TO THE ORIGINAL CONNECTOR
Submitted 2022-01-20
By BOY
From PHOENIX
Don't purchase unless you feel like messing with bare leads and stripping wires and making new wire connections. THIS IS NOT A PLUG AND PLAY PART. IT REQUIRES MODIFICATIONS TO THE ORIGINAL CONNECTOR.
Bottom Line not recommended
-
Just what I needed
Just what I needed
Submitted 2021-07-22
By Guy
From Undisclosed
Seems to have worked well.. Good price and functional. The little spice kit that comes with it I forget the trade name enables you to use this sensor on any application or automobile. Keep in mind that you will use the plug from your existing sensor. Just follow the instructions and you will be just fine.
Bottom Line NULL
-
Does NOT WORK on GMC Terrain
Does NOT WORK on GMC Terrain
Submitted 2021-07-04
By Mainer75
From Lewiston, ME
This does not work with a GMC Terrain as the downstream as listed. Causes engine light to always be on.
Bottom Line not recommended
from $71.99
View Product -
Bosch - Bosch Oxygen Sensor (Part No. C501066917BOS)
DescriptionThe Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
- Fine particle filter. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
Read 3 review(s)Review snapshot ® by PowerReviews
-
sensor for 2002 Honda Accord
sensor for 2002 Honda Accord
Submitted 2014-12-17
By moons
From Prospect,Ky
perfect match up
Bottom Line recommended
-
Quality product at a good price.
Quality product at a good price.
Submitted 2014-01-27
By Good Guy
From Florence, SC
Quality product at a good price.
Bottom Line recommended
-
fit correctly
fit correctly
Submitted 2013-01-07
By No use for a nickanme
From NJ
good fit appears to be every bit as good as OEM
Bottom Line NULL
from $83.05
View Product -
DENSO - Oxygen Sensor: 4 Wire, 21.26" Long, Heated, Exact Fit (Part No. 234-4122)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
item shipped was a USED O2 sensor
item shipped was a USED O2 sensor
Submitted 2013-08-08
By Lup
From Warwick RI
Item was shipped USED. After consulting with a local advance auto part manager, they finally decided it was shipped used and a new sensor is coming in Friday. Hope they do not screw me over on this as they did not record anything or ordered anything while i was there.
Bottom Line not recommended
-
great product!!
great product!!
Submitted 2013-05-08
By dc5G
From Passaic, NJ
2002 ACURA RSX TYPE S here! very good product, had check engine installed it and check engine is GONE!!
Bottom Line recommended
-
Best Product
Best Product
Submitted 2013-01-23
By Kam
From IL
This product same as you buy from dealer which cause 3 time more. This is same as OE and less cheaper.
Bottom Line recommended
from $58.99
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010137291ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
Read 3 review(s)Review snapshot ® by PowerReviews
-
item shipped was a USED O2 sensor
item shipped was a USED O2 sensor
Submitted 2013-08-08
By Lup
From Warwick RI
Item was shipped USED. After consulting with a local advance auto part manager, they finally decided it was shipped used and a new sensor is coming in Friday. Hope they do not screw me over on this as they did not record anything or ordered anything while i was there.
Bottom Line not recommended
-
great product!!
great product!!
Submitted 2013-05-08
By dc5G
From Passaic, NJ
2002 ACURA RSX TYPE S here! very good product, had check engine installed it and check engine is GONE!!
Bottom Line recommended
-
Best Product
Best Product
Submitted 2013-01-23
By Kam
From IL
This product same as you buy from dealer which cause 3 time more. This is same as OE and less cheaper.
Bottom Line recommended
from $74.15
View Product -
Bosch - Oxygen Sensor: 4 Wire, 11.02" Long, Heated, Exact Fit (Part No. 13075)
DescriptionBosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Read 3 review(s)Review snapshot ® by PowerReviews
-
sensor for 2002 Honda Accord
sensor for 2002 Honda Accord
Submitted 2014-12-17
By moons
From Prospect,Ky
perfect match up
Bottom Line recommended
-
Quality product at a good price.
Quality product at a good price.
Submitted 2014-01-27
By Good Guy
From Florence, SC
Quality product at a good price.
Bottom Line recommended
-
fit correctly
fit correctly
Submitted 2013-01-07
By No use for a nickanme
From NJ
good fit appears to be every bit as good as OEM
Bottom Line NULL
from $78.99
View Product -
DENSO - Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No. 234-4209)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
The connector DOES NOT come with the sensor!
The connector DOES NOT come with the sensor!
Submitted 2023-05-23
By Mike
From Denver
While the photo shows the sensor and connector wired together and ready to go, the sensor for a 2004 Tundra does not come with a sensor. You have to cut off the old one and use it again. This seems to be a fairly common thing. The ad for this part is misleading! It states that this part is a direct fit, but it's not a direct fit without reusing and properly attaching the old connector. The ad even states that the sensor comes with a 'universal connector', when instead it should state the truth and say ' connector: None'.
Bottom Line not recommended
-
Instructions
Instructions
Submitted 2021-11-06
By Thelcpl87
From Peoria Illinois
I wish there were instructions on how to wire this to install on vehicles
Bottom Line not recommended
-
Spend the extra for a plug
Spend the extra for a plug
Submitted 2021-08-31
By NotSoFast
From NC
Replaced my upstream sensor on a '99 Accord. THOUGHT it would be so simple I could borrow the socket and do it in the parking lot. While the VIDEO shows a sensor with a plug, this one has 4 bare wires and requires much more time, thought, and tools. And, on the issue of tools, the website specifically said that this socket was available for loan; the 2 people in the store looked at me blankly. I would have "purchased" the kit to return if that option had been given. I would have needed the deep well socket to avoid removing the head shield; thankfully the little rusted bolts came out. Wires for my setup were blue to white, green to white, and either black to black. Definitely make sure the included directions work for your setup before removing (and destroying) the old one.
Bottom Line not recommended
from $81.99
View Product -
Bosch - Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No. 15733)
DescriptionBosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
from $80.99
View Product -
NTK - Switching Oxygen Sensor: 4 Wire, 17.5" Long, Heated, Direct Fit (Part No. 24290)
DescriptionNTK is the world's largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle's on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:- OEM QUALITY: NTK is the world's largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
from $43.99
View Product -
NTK - Switching Oxygen Sensor: 4 Wire, 19" Long, Heated, Direct Fit (Part No. 24584)
DescriptionNTK is the world's largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle's on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:- OEM QUALITY: NTK is the world's largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
from $109.99
View Product -
DENSO - First Time Fit Air Fuel Ratio Sensor (Part No. C5015137314ND)
DescriptionDENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.
Product Features:- Tarnish-proof platinum electrodes provides longer life and maintains accuracy
- Quick-response planar zirconia element can quickly detect oxygen concentration
- Measures A/F ratios from approximately 12:1 to 19:1
- Increased performance by mapping a/f ratios throughout rpm range
- Reduces emissions by keeping the air-fuel mixture at an optimum ratio
- Reduced fuel consumption and maximizes catalytic converter life Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
from $357.68
View Product -
DENSO - First Time Fit Air Fuel Ratio Sensor (Part No. C5015137315ND)
DescriptionDENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.
Product Features:- Tarnish-proof platinum electrodes provides longer life and maintains accuracy
- Quick-response planar zirconia element can quickly detect oxygen concentration
- Measures A/F ratios from approximately 12:1 to 19:1
- Increased performance by mapping a/f ratios throughout rpm range
- Reduces emissions by keeping the air-fuel mixture at an optimum ratio
- Reduced fuel consumption and maximizes catalytic converter life Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
from $308.25
View Product -
Walker - Walker Oxygen Sensor (Part No. C5010402586WKR)
DescriptionWalker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.
Product Features:- Improved Engine Response and Performance
- Lower Emissions
- Improved Fuel Economy
- Longer Sensor Life
- Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install
from $107.27
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010157402ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $104.87
View Product -
NTK - Switching Oxygen Sensor: 4 Wire, 14.75" Long, Heated, Direct Fit (Part No. 24582)
DescriptionNTK is the world's largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle's on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:- OEM QUALITY: NTK is the world's largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
from $124.99
View Product -
NTK - Switching Oxygen Sensor: 4 Wire, 13.5" Long, Heated, Direct Fit (Part No. 24655)
DescriptionNTK is the world's largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle's on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:- OEM QUALITY: NTK is the world's largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
from $134.99
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010100899ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $109.86
View Product -
Bosch - Bosch Oxygen Sensor (Part No. C5010111316BOS)
DescriptionThe Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
- Fine particle filter. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
from $94.40
View Product -
Bosch - Oxygen Sensor: 4 Wire, 15.16" Long, Heated, Exact Fit (Part No. 13377)
DescriptionBosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
from $85.99
View Product -
DENSO - First Time Fit Oxygen Sensor (Part No. C5010100900ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $65.46
View Product
FAQs for 2000 Honda Accord Oxygen Sensor Products
What are the most popular 2000 Honda Accord Oxygen Sensor products?
Replacing your Oxygen Sensor on your 2000 Honda Accord? Find our most popular parts below:What are the best aftermarket Oxygen Sensor products for the 2000 Honda Accord?
See what past customers had to say about our highest-rated Oxygen Sensor products for the 2000 Honda Accord: