2000 GMC Sierra 1500 Performance and Racing Products
Find Your Specific 2000 GMC Sierra 1500 Performance and Racing Products
Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 2000 Sierra 1500. Advance Auto Parts has popular Sierra 1500 parts like Performance Ignition Products, Performance Steering Products, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Sierra 1500 model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2000 GMC Sierra 1500 Performance and Racing Products below and start saving instantly.
Popular 2000 GMC Sierra 1500 Performance and Racing Products Categories
Essential Performance and Racing Products for 2000 GMC Sierra 1500s
Energy Suspension – Sway Bar Set (Part No.3.5213R)
from
$62.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System To Work At 100% Efficiency
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound (Part No.853046)
from
$169.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Durable fully welded 409 stainless steel
- Noticeable interior resonance
- Deep aggressive exhaust note
- Excellent performance on high horsepower vehicles
- Made in the USA
Energy Suspension – Control Arm Bushing Set (Part No.3.3190R)
from
$131.99
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating And Non Binding
- Fits Into The Remaining Stock Control Arms
Accel – Chevy/Gmc Vortec V6 High Performance Distributor Cap (Part No.120142)
from
$84.99
ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Brass inserts provide for high spark energy flow
- Polyester Glass Filled For Durability
- Heavy duty for maximum energy transfer
Competition Cams – Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6 (Part No.875-1)
from
$39.99
Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6
Energy Suspension – Transmission Mount (Part No.3.1129R)
from
$97.99
A true performance application component for cars, trucks, hot rods. For racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious To Vehicle Oils And Chemicals
- Strong Enough Too Handle High Performance
MSD Ignition – Super Conductor Spark Plug Wire Set – 1999-2013 GM Truck & SUV, Black (Part No.32823)
from
$119.99
Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 11 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Product Features:
See More
Product Features:
- Custom fit for make and model listed.
- Wires are precut to exact specifications
- Bolt-on performance
- Wire Lengths: 8 – 11″
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15842)
from
$1038.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15842 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Angle Cut Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15842 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15842 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Motive Gear – Performance Differential Ring and Pinion (Part No.G885373)
Flowtech – EO Legal Headers (Part No.91835FLT)
from
$459.99
These Flow tech headers fit 1999-2002 Chevy/GMC Sierra/Silverado/Suburban/Yukon/Escalade and 2003-2004 GM Pickup: 6.0L with EGR, 2WD and 4WD, Tube Size 1.625″ O.D., w/EGR; Black Paint; 50-State Legal header CARB EO #D-115-16.
Product Features:
See More
Product Features:
- This is a 50-State Legal header C.A.R.B. EO #D-115-16.
- Sturdy 16 gauge tubing
- Extra thick 3/8″ flanges for a leak-free seal
- Designed as a direct fit replacement for factory exhaust manifolds
- Will accommodate all emission control devices
- Bolts directly to factory head pipe
Dynomax – Exhaust System Hanger Length 8.125 Inches (Part No.36154)
from
$37.49
Complete your exhaust repair with DynoMax exhaust system hangers. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax exhaust system hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
Energy Suspension – Control Arm Bushing Set (Part No.3.3186R)
from
$104.99
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating And Non Binding
- Fits Into The Remaining Stock Control Arms
Energy Suspension – Hyper-Flex Leaf Spring Bushings for Increased Performance & Durability (Part No.3.2141G)
from
$122.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter (Part No.71-3070)
from
$524.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Powder-coated aluminum intake tube paired with dry synthetic air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 90 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- HIGH QUALITY: Made in America.
Dynomax – Exhaust Tail Pipe 2.5 Inch Inlet ID 2.5 Inch Outlet OD (Part No.52440)
from
$39.49
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
Competition Cams – CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA (Part No.54-426-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power. Without sacrificing low RPM torque, these camshafts extend the RPM potential of GM LS e
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Energy Suspension – Hyper-Flex System (Part No.3.18129G)
from
$582.99
Energy’s Hyper-Flex is superior performance polyurethane which has proven itself under the most demanding conditions on the race track, off-road and street performance driving, Hyper-Flex components do not wear or deteriorate from exposure to undercar chemicals such as oils and coolants and withstand atmospheric conditions like UV exposure and pollutants. Impervious to these elements, Energy’s Hyper-Flex components are a great value. Not only will it outlast rubber 5 to 1 but are a cost effective performance improvement for your car or truck. Whether domestic or import, front, rear or 4WD, old or new, your vehicle will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane components. All Hyper-Flex components are proudly Made in America and are available in red or black.
Product Features:
See More
Product Features:
- Incredible Improvement In Control
- Maintains Proper Caster And Camber Alignment
- Increase In Handling And Control
- Greatly Reduce Wheel Hop On Quick Acceleration
- Even Braking Control Is Improved
- Better Suspension Stability
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.71-3058)
from
$524.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Powder-coated aluminum intake tube paired with dry synthetic air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 90 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- HIGH QUALITY: Made in America.
Airaid – Junior Air Intake System (Part No.201-785)
from
$314.99
The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube And the paper filter, in order to help boost horsepower And mileage. This air intake system offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter And an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten And improve clean air flow to the engine for added throttle response And increased horsepower And torque. Each kit is custom made to fit specific vehicles And is easy to install And requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable And fully backed by the AIRAID No-Hassle limited lifetime warranty. Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.
See More
Accel – High-Performance Distributor Rotor For Gm 4.3L-7.4L Engines (Part No.130141)
from
$32.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
- Fits Most Stock And Modified Distributors
- Polyester Glass Filled For Durability
SCT Performance – X4 Performance Programmer (Part No.7416)
from
$399.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
Hypertech – Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (Part No.3300)
from
$239.99
If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).
Product Features:
See More
Product Features:
- Speedometer correction for multiple tire sizes
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
- Product might not be available in all states due to local laws.
Diablosport – Trinity 2 EX – 50 State Legal (Part No.9200)
from
$727.99
The Diablo Sport Trinity T2 EX is the most advanced performance programmer and monitoring system available for popular 1999-2016 GM vehicles, including the Silverado, Sierra, Camaro, Corvette, Tahoe, Yukon, and Escalade. Designed to deliver real horsepower and torque gains while staying fully emissions compliant, the Trinity T2 EX combines cutting-edge tuning technology with an easy-to-use, high-definition touchscreen interface.
Product Features:
See More
Product Features:
- Add 25-30 rewhip over stock on 93 octane fuel.
- Trucks and SUVs get tunes for 87, 91 and 93 octane fuels
- Performance applications get tunes for 91 and 93 octane fuels
- 99-16 4.8/5.3/6.0/6.2 trucks
- 99-16 Camaro 5.7/6.2
- 99-16 Corvette 5.7/6.0/6.2
- 04-06 GTO 5.7/6.0
- 04-06 SSR
- 99-16 Escalade 6.0/6.2
- 99-16 Tahoe/Yukon 4.8/5.3/6.0/6.2
- Tunes for TCM provided where applicable
- Remove top speed limiter
- Full-color, high-definition 5 touch screen
- Lightning-fast read/write times
- Performance tuning for mileage, towing, daily driving, and performance
- Dyno-proven power gains
- 50 state legal performance.
- Wi-Fi Updating
- Full data logging capability
- AFM active fuel management options
- Read and clear diagnostic trouble codes
- Multi-vehicle licenses available
- Correct speedometer and adjust speed/rev limiters
- Options, features, and coverage may vary based on vehicle application
Accel – Handheld Computer Programmer For Enhanced Performance And Tuning Control (Part No.49505)
from
$435.99
Engineered for enthusiasts who want real control over performance, the Super Tuner unlocks power through precise calibration of fuel, spark, and transmission settings. It improves throttle response, adjusts for aftermarket upgrades, and delivers optimized drivability across GM, Ford, and Dodge platforms. Advanced mapping gives measurable gains without compromising reliability. Backed by decades of ignition and tuning expertise, it simplifies the tuning process while preserving factory safeguards. Expect sharper acceleration, smoother shifts, and a noticeable improvement in overall performance with every drive.
Product Features:
See More
Product Features:
- Performance test (0-60, ╝ mile testing)
- Carb EO # D-745
- Shift point and firmness adjustment
- Tire size and axle gear ratio adjustment
- Internet updating using PC software
- HD 2.8″ color screen with updated interface for easier and faster modifications
- Speed and rev limiter adjustments
- Active fuel management control
- Diagnostic capability – read and clear trouble codes with explanation of codes
- Speed and rev limiter adjustments.
- Carb EO # D-745
- Diagnostic capability – read and clear trouble codes with explanation of codes
Upgrade your 2000 GMC Sierra 1500 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2000 GMC Sierra 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your Sierra 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 55 Performance and Racing Products for the 2000 GMC Sierra 1500, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Steering Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2000 GMC Sierra 1500 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $30.99 to $1,195.00, with
an average price of $340.22.
Our 55 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 2000 GMC Sierra 1500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 GMC Sierra 1500, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Spectre, Accel, and more.
K&N Performance and Racing Products
start at just $367.99 and boast an impressive 4.8 stars average rating from customers.
Spectre and Accel also bring quality to the table, with Performance and Racing Products available starting at $32.99, and at an average 4.2 stars rating.
With 1,155 customer reviews and counting, our 2000 GMC Sierra 1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 GMC Sierra 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Sierra 1500 in top shape, all in one place.
Start shopping confidently below for your 2000 GMC Sierra 1500!
Best-Selling Performance Ignition Products for 2000 GMC Sierra 1500s
Enhance the driving experience in your GMC with 1 quality Performance Ignition Product components, starting at $119.99.
MSD Ignition – Super Conductor Spark Plug Wire Set – 1999-2013 GM Truck & SUV, Black (Part No.32823)
from
$119.99
Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 11 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Product Features:
See More
Product Features:
- Custom fit for make and model listed.
- Wires are precut to exact specifications
- Bolt-on performance
- Wire Lengths: 8 – 11″
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Most Popular 2000 GMC Sierra 1500 Performance Steering Products
Customize your GMC with 2 Performance Steering Products products
like Performance Sway Bar Link Kits, all
priced under $62.99.
Energy Suspension – Sway Bar Set (Part No.3.5213R)
from
$62.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System To Work At 100% Efficiency
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.3.5213G)
from
$62.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Top Picks for 2000 GMC Sierra 1500 Performance Exhaust Products
Upgrade GMC Sierra 1500s with top-quality Performance Exhaust Products parts, including 12 OEM and aftermarket selections for your 2000 model.
Dynomax – Ultra Flo Exhaust System Kit Intermediate Pipe, Muffler, Tail Pipe, Clamps (Part No.39311)
from
$467.99
Give your Chevrolet Silverado/GMC Sierra 1500 or 2500’s exhaust system an upgrade with a DynoMax Ultra Flo welded 3-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
Dynomax – Super Turbo Exhaust Muffler 3 Inch Inlet ID 3 Inch Outlet ID (Part No.17673)
from
$262.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Super Turbo mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
- Dyno proven to flow up to 700 SCFM
Dynomax – Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID (Part No.17228)
from
$156.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Flowmaster Inc. – 70 Series Muffler, 3in Center Inlet 3in Offset Outlet, 22in long, Non-Reversible, Mild Sound (Part No.853072)
from
$255.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Recommended for SUV/trucks/motorhomes/tow vehicles
- Improved horsepower, torque and potential mileage improvement
- Race proven patented Delta Flow technology
Dynomax – Exhaust Tail Pipe 2.5 Inch Inlet ID 2.5 Inch Outlet OD (Part No.52440)
from
$39.49
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
Dynomax – Super Turbo Exhaust System Kit 3 Inch Flanged Intermediate Pipe, 3 Inch Tail Pipe w/ Stainless Steel Spout & Clamps (Part No.19305)
from
$556.99
Give your Chevrolet C1500/Silverado 1500 or GMC Sierra 1500’s exhaust system an upgrade with a DynoMax Super Turbo single 3-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow and reduces turbulence and fiberglass matting that absorbs unwanted interior resonance for a mellow tone.
Product Features:
See More
Product Features:
Flowmaster Inc. – Super 50 Muffler, 3in Center Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.853057)
from
$224.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Excellent choice for large displacement vehicles
- Improved horsepower, torque and potential mileage improvement
- Race proven patented Delta Flow technology
Dynomax – Exhaust Pipe 2 Bolt Welded Flange Inlet 3 Inch Outlet OD (Part No.53104)
from
$135.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
Dynomax – Exhaust System Hanger Length 8.125 Inches (Part No.36154)
from
$37.49
Complete your exhaust repair with DynoMax exhaust system hangers. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax exhaust system hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
Dynomax – Exhaust Pipe 2 Bolt Welded Flange Inlet 3 Inch Outlet OD (Part No.54054)
from
$139.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15618)
from
$901.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15618 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15618 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15618 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Flowtech – EO Legal Headers (Part No.91834FLT)
from
$489.99
These Flow tech headers fit 1999-2002 Chevy/GMC Silverado/Sierra: 4.8L/5.3L, 2000-2001 Tahoe/Suburban/Yukon: 4.8L/5.3L, Tube Size 1.625″ O.D., w/o A.I.R. w/EGR; Black Paint; 50-State Legal header CARB EO #D-115-16.
Product Features:
See More
Product Features:
- This is a 50-State Legal header C.A.R.B. EO #D-115-16.
- Sturdy 16 gauge tubing
- Extra thick 3/8″ flanges for a leak-free seal
- Designed as a direct fit replacement for factory exhaust manifolds
- Will accommodate all emission control devices
- Bolts directly to factory head pipe
- Complete with premium gaskets and hardware
In-Demand Performance Air Intake Kits for 2000 GMC Sierra 1500s
Select from 6 premium Performance Air Intake Kits parts for your 2000 GMC Sierra 1500, with prices ranging from $207.99 to $472.99.
K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.57-3021-1)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.77-3021KP)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9900B)
from
$208.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a blue Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9900)
from
$208.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing, and a black powder coated heat shield to help prevent heated engine air from entering the intake inlet. Included are the velocity stack adapter, hose clamps, MAF adapter ring, couplers, stainless steel clamps and all necessary hardware for an OE fit and finish. The Spectre Intake tube comes with an adapter to mount the stock MAF sensor.
Product Features:
See More
Product Features:
- Designed for horsepower and torque increase
- Easy to install performance
- Includes a Spectre reusable air filter
- High quality polished aluminum tubes
- Stock MAF sensor fits with supplied adapter ring
- Passenger side Air Filter Position
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.57-3038)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9900K)
from
$207.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a black Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
Most Sold 2000 GMC Sierra 1500 Performance Engines
Explore our best-selling GMC parts for the 2000 Sierra 1500 among 16 OEM and aftermarket options starting from $30.99.
Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam (Part No.54-408-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
- 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26918-16 with this camshaft
B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)
from
$459.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-408-11)
from
$1195.00
XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Holeshot 2400 (Part No.70441)
from
$819.99
Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-600-11)
from
$805.99
Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV
B & M – Holeshot 2400 (Part No.70419)
from
$686.99
HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Torque Converter, Holeshot 2000 (Part No.70417)
from
$649.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – Magnum 215/215 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-420-8)
from
$611.99
Mild street performance. Slight lope at idle. Stock converter, aftermarket intake and headers. 3.40 to 4.10 gears.
Product Features:
See More
Product Features:
Competition Cams – GM LS Dual Valve Spring Kit with Tool Steel Retainers (Part No.26925TS-KIT)
from
$595.99
GM LS Dual Valve Spring Kit with Tool Steel Retainers
Competition Cams – CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA (Part No.54-426-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power. Without sacrificing low RPM torque, these camshafts extend the RPM potential of GM LS e
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – Ultra-Gold ARC Rocker with 1.72 Ratio for Pedestal Mount GM LS1, LS2, LS6 (Part No.19024-1)
from
$72.99
Ultra-Gold ARC Rocker with 1.72 Ratio for Pedestal Mount GM LS1, LS2, LS6
Competition Cams – Ultra Pro Magnum 1.8 Ratio Rocker Arm for GM LS1/LS6 with 3/8" Stud (Part No.1675-1)
from
$62.99
This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.8 ratio, this rocker fits LS1/2/6 with a 3/8″ diameter stud.
Product Features:
See More
Product Features:
Competition Cams – Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6 (Part No.875-1)
from
$39.99
Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6
Competition Cams – Flat 1 Piece Guide Plate Set GM LS with 3/8" Pushrod and 8mm Stud (Part No.4856-8)
from
$30.99
Flat 1 Piece Guide Plate Set GM LS with 3/8" Pushrod and 8mm Stud
Top-Rated Performance and Racing Products Brands For Your 2000 GMC Sierra 1500
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2000 GMC Sierra 1500s. Below you’ll find some of our best rated Performance and Racing Products from K&N, Spectre, and Accel, and more. Performance and Racing Products from these brands that fit a 2000 Sierra 1500 start at just $32.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2000 GMC Sierra 1500 Performance and Racing Products
When it comes to maintaining or upgrading your 2000 GMC Sierra 1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2000 GMC Sierra 1500. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $367.99, with an average price of just $402.99. Plus, with over 53 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$367.99
(6)
Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter
“Purchased the entire FIPK 2 for my 2004 Chevy Silverado 4.3L, V-6 Vortec. I was getting around 19-20 mpg on the highway, and slight pick-up when pass”
from
$472.99
(14)
Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter
“Excellent instructions and easy to install. Very satisfied.”
from
$367.99
(33)
Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter
“Bought a little over a year ago! Love it makes my truck sound louder and has more power! Definitely worth it! I did notice a bit of gas mileage differ”
Popular Spectre 2000 GMC Sierra 1500 Performance and Racing Products
Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2000 GMC Sierra 1500 owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 2000 Sierra 1500, Advance Auto Parts carries a full inventory of 2 Spectre Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these Spectre Performance and Racing Products range up to $208.99, plus, with more than 54 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$208.99
(53)
Spectre Air Intake Kit
“This kit was an easy install only took about an hour and 1/2. Anyone can do it. The pictures should be better in the instructions to show where the fi”
FAQs for 2000 GMC Sierra 1500 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2000 GMC Sierra 1500s?
Out of 55 Performance and Racing Products that fit 2000 GMC Sierra 1500s, the following parts are the top sellers:
- Sway Bar Set (22908210) – $62.99
- Hyper-Flex Leaf Spring Bushings for Increased Performance & Durability (22907863) – $122.99
- Sway Bar Bushing Set (22908211) – $62.99
What’s the price range for 2000 GMC Sierra 1500 Performance and Racing Products?
Performance and Racing Product prices for the 2000 GMC Sierra 1500 start at $30.99 and go up to $1,195.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2000 GMC Sierra 1500?
The average price for Performance and Racing Products for the 2000 GMC Sierra 1500 is $340.22. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other GMC Sierra 1500 model years?
What are the cheapest Performance and Racing Products for my 2000 GMC Sierra 1500?
The cheapest 2000 GMC Sierra 1500 Performance and Racing Products we carry in stock are:
- Flat 1 Piece Guide Plate Set GM LS with 3/8" Pushrod and 8mm Stud (50288041) – $30.99
- High-Performance Distributor Rotor For Gm 4.3L-7.4L Engines (22904340) – $32.99
- Exhaust System Hanger Length 8.125 Inches (18291680) – $37.49
- Exhaust Tail Pipe 2.5 Inch Inlet ID 2.5 Inch Outlet OD (10044309) – $39.49
- Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6 (50286594) – $39.99
What are the top-rated Performance and Racing Products that fit the 2000 GMC Sierra 1500?
Out of 1,155 reviews by customers, our 2000 GMC Sierra 1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2000 GMC Sierra 1500 and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (17400160) – $367.99
- Spectre Air Intake Kit (10194270) – $208.99
- Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (17402846) – $472.99
- Performance Distributors
- Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (17400160) – $367.99
- Spectre Air Intake Kit (10194270) – $208.99
- Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (17402846) – $472.99
- Performance Drivetrains
- Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (17400160) – $367.99
- Spectre Air Intake Kit (10194270) – $208.99
- Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (17402846) – $472.99
What types of Performance and Racing Products do you sell for my 2000 GMC Sierra 1500?
As of 6/2/26, these are some of the most in-demand types of Performance and Racing Products for a 2000 GMC Sierra 1500:
Can I get help with 2000 GMC Sierra 1500 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.
What is your return policy for GMC Sierra 1500 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new GMC Sierra 1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
