2000 Dodge Dakota Performance Exhaust Products

This Flowmaster Force II cat-back exhaust system is custom designed for 2005-2010 Dodge Dakota trucks with V6 or V8 engines and is perfect for the person looking for a moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features a mandrel-bent aluminized steel inlet pipe flowing into a Super 50 Series muffler for a moderate performance exterior sound. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with a large 3.50-inch polished embossed stainless steel tip. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts, hardware and instructions for a quick and easy installation you can do at home. Note: Fits 2/4 wheel drive models and all wheelbases.

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

This Flowmaster Force II cat-back exhaust system is custom designed for 2000-2003 Dodge Dakota truck with 4.7L, 5.2L or 5.9L engine and is perfect for the person looking for a moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features a mandrel-bent aluminized steel inlet pipe flowing into a Super 50 Series muffler for a mild performance exterior sound. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with a large 3.50-inch polished embossed stainless steel tip. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts, hardware and instructions for a quick and easy installation you can do at home. Note: Fits 2/4 wheel drive models and all wheelbases.

FLOWTECH’s emissions-friendly headers are just the ticket for those who want the best of both worlds – top performance and a clean machine. All Shorty Smog Headers bolt on quickly and easily to the factory exhaust system, retaining all stock emissions equipment, and offering maximum horsepower gains plus increased efficiency.

FLOWTECH’s headers are just the ticket for those who want the best of both worlds – top performance and a clean machine. All Shorty Headers bolt on quickly and easily to the factory exhaust system, offering maximum horsepower gains plus increased efficiency.

JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Flowtech Gaskets, 99361FLT. PERFORMANCE PARTS>PERFORMANCE EXHAUST>EXHAUST SYSTEMS>EXHAUST ACCESSORIES & OTHER from Flowtech

“A high-density non-asbestos fiber/metal core composite material consisting of two graphite coated, heat resistant fiber blended sheets that are mechanically and chemically fused to an expanded steel core. The finished product provides high heat resistance, excellent load retention and unmatched sealing performance on exhaust manifold and header applications. A 50% recovery rate allows for gasket expansion in the event your header loses the proper header bolt torque. Gaskets future a 1.50″”x 1.20″” port size.”

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

The 70 series utilizes Flowmaster’s Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow&reg technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. The ‘Pure Unadulterated POWER’ of DynoMax Super Turbo mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Super Turbo mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

The three chamber design utilizes Flowmaster’s Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

This two chamber design incorporates Flowmaster’s Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

The 70 series utilizes Flowmaster’s Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our excl usive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo SS Polished mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

This two chamber design incorporates Flowmaster’s Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

Developed from our Top Ten race muffler lineup for use on the street/strip, the Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound, especially on forced induction and high horsepower vehicles. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.