2000 Chrysler LHS Belts and Hoses
Find Your Specific 2000 Chrysler LHS Belts and Hoses
Below you will find various in-demand Chrysler Belts and Hoses, components and accessories for your 2000 LHS. Advance Auto Parts has popular LHS parts like Serpentine and V Belts, Heater Hoses, Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other LHS model years including
1994,
1995,
1996,
1997,
1999,
2001 and more. Select a category of 2000 Chrysler LHS Belts and Hoses below and start saving instantly.
Popular 2000 Chrysler LHS Belts and Hoses Categories
Essential Belts and Hoses for 2000 Chrysler LHSs
Dayco – Dayco Bottom Cog V-Belt 55 Inch Long, Exact Fit Premium Quality, 15550 (Part No.15550)
from
$16.29
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Driveworks – Automotive V-Belt, Driveworks, 55015 (Part No.55015)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Gates – Gates Automotive XL High Capacity V-Belt, 7541 (Part No.7541)
from
$27.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
See More
Gates – Gates Premium Molded Coolant Hose, 22002 (Part No.22002)
from
$46.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Premium Molded Coolant Hose, 22421 (Part No.22421)
from
$45.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.50"" Long, 1.25"" Diameter, E71976" (Part No.E71976)
from
$22.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Imperial – Imperial Metal Line Kit for Engine Oil Coolers, 240293 (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
See More
Imperial – "Imperial 1/2"" x 12′ Engine Oil Cooler Hose, 240112" (Part No.240112)
from
$46.99
“1/2″” x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.”
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13"" Long, 1.25"" Diameter, C71635" (Part No.C71635)
from
$20.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14"" Long, 1.25"" Diameter, D71977" (Part No.D71977)
from
$20.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28412 (Part No.28412)
Dayco – Idler Pulley, Dayco, 89097 (Part No.89097)
from
$32.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dorman – Dorman Idler Pulley (Pulley only), 419-602 (Part No.419-602)
from
$14.99
This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
See More
Dorman – Dorman Idler/Tensioner Pulley: Specific Fit, Steel, 123.2 mm Diameter, 419-707 (Part No.419-707)
from
$21.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
See More
Litens – Litens Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter, 900055A (Part No.900055A)
from
$31.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt Single Belt, 3.55 Inch Diameter, Black, Steel, 53002905 (Part No.53002905)
from
$20.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Litens – Litens Idler Pulley: Direct Fit, Steel, 123mm Diameter, 900049A (Part No.900049A)
from
$24.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28408 (Part No.28408)
from
$1.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Heater Hose By Gates
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 9/32 Inch Diameter, 16 Inch Length, 86830 (Part No.86830)
from
$12.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Silicone Straight Heater Hose (Sold by foot), 26242 (Part No.26242)
from
$24.99
Constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Approved for marine applications.
See More
Gates – Gates Premium Molded Heater Hose, 19604 (Part No.19604)
from
$36.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/16 Inch Diameter, 4 1/4 Inch Length, 86802 (Part No.86802)
from
$10.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 23/32 Inch Diameter, 10 Inch Length, 88399 (Part No.88399)
from
$14.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 9 Inch Length, 88374 (Part No.88374)
from
$14.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 10 Inch Length, 87655 (Part No.87655)
from
$12.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length, 80412 (Part No.80412)
from
$35.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 10 Inch Length, 88352 (Part No.88352)
from
$33.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 10 Inch Length, 86096 (Part No.86096)
from
$22.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Upgrade your 2000 Chrysler LHS with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2000 Chrysler LHS, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Belts and Hoses are key to keeping your LHS functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Belts and Hoses for the 2000 Chrysler LHS, designed to meet your needs without breaking the bank.
From
Serpentine and V Belt
replacements to
Heater Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2000 Chrysler LHS at great prices.
Our Belts and Hoses inventory for this model
ranges from just $2.65 to $59.99, with
an average price of $27.03.
Our 22 Belts and Hoses in stock come from 7 trusted brands, so you’re sure to find the right part for your 2000 Chrysler LHS without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Chrysler LHS, we stock popular OEM and aftermarket Belts and Hoses from top names
like Litens, Dayco, Driveworks, and more.
Litens Belts and Hoses
start at just $31.99 and boast an impressive 4.7 stars average rating from customers.
Dayco and Driveworks also bring quality to the table, with Belts and Hoses available starting at $5.49, and at an average 4.5 stars rating.
With 107 customer reviews and counting, our 2000 Chrysler LHS Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 Chrysler LHS is always ready to roll. We’re committed to providing you with everything you need to keep your LHS in top shape, all in one place.
Start shopping confidently below for your 2000 Chrysler LHS!
Best-Selling Serpentine and V Belts for 2000 Chrysler LHSs
Enhance the driving experience in your Chrysler with 8 quality Serpentine and V Belt components, starting at $5.49.
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 53 Long, 6 Rib Count, 530K6 (Part No.530K6)
from
$29.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Idler Pulley, Dayco, 89097 (Part No.89097)
from
$32.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Driveworks – Automotive V-Belt, Driveworks, 55015 (Part No.55015)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Dayco – Dayco Bottom Cog V-Belt 55 Inch Long, Exact Fit Premium Quality, 15550 (Part No.15550)
from
$16.29
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 53 Long, 6 Rib Count, 5060530 (Part No.5060530)
from
$46.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060529 (Part No.K060529)
from
$39.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Automotive XL High Capacity V-Belt, 7550 (Part No.7550)
from
$29.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
See More
Carquest Standard – "Carquest Serpentine Belt: 53.0"" Long, 6 Rib Count, 530K6" (Part No.530K6)
from
$29.49
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Most Popular 2000 Chrysler LHS Heater Hoses
Customize your Chrysler with 5 Heater Hoses products
like Heater Hoses, all
priced under $24.99.
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 10 Inch Length, 86096 (Part No.86096)
from
$22.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 23/32 Inch Diameter, 10 Inch Length, 88399 (Part No.88399)
from
$14.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 9/32 Inch Diameter, 16 Inch Length, 86830 (Part No.86830)
from
$12.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 9 Inch Length, 88374 (Part No.88374)
from
$14.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Silicone Straight Heater Hose (Sold by foot), 26242 (Part No.26242)
from
$24.99
Constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Approved for marine applications.
See More
Top Picks for 2000 Chrysler LHS Engine Cooling Hoses
Upgrade Chrysler LHSs with top-quality Engine Cooling Hoses parts, including 3 OEM and aftermarket selections for your 2000 model.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14"" Long, 1.25"" Diameter, D71977" (Part No.D71977)
from
$20.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.50"" Long, 1.25"" Diameter, E71976" (Part No.E71976)
from
$22.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 22421 (Part No.22421)
from
$45.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
In-Demand Oil Cooler Hoses for 2000 Chrysler LHSs
Select from 2 premium Oil Cooler Hoses parts for your 2000 Chrysler LHS, with prices ranging from $46.99 to $59.99.
Imperial – "Imperial 1/2"" x 12′ Engine Oil Cooler Hose, 240112" (Part No.240112)
from
$46.99
“1/2″” x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.”
See More
Imperial – Imperial Metal Line Kit for Engine Oil Coolers, 240293 (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
See More
Most Sold 2000 Chrysler LHS Pulleys
Explore our best-selling Chrysler parts for the 2000 LHS among 4 OEM and aftermarket options starting from $14.99.
Litens – Litens Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter, 900055A (Part No.900055A)
from
$31.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dorman – Dorman Idler Pulley (Pulley only), 419-602 (Part No.419-602)
from
$14.99
This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
See More
Dorman – Dorman Idler/Tensioner Pulley: Specific Fit, Steel, 123.2 mm Diameter, 419-707 (Part No.419-707)
from
$21.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
See More
Litens – Litens Idler Pulley: Direct Fit, Steel, 123mm Diameter, 900049A (Part No.900049A)
from
$24.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Top-Rated Belts and Hoses Brands For Your 2000 Chrysler LHS
Shop for the best-rated brands offering Belts and Hoses and other products for your 2000 Chrysler LHSs. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Driveworks, and more. Belts and Hoses from these brands that fit a 2000 LHS start at just $5.49 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Litens 2000 Chrysler LHS Belts and Hoses
When it comes to maintaining or upgrading your 2000 Chrysler LHS, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2000 Chrysler LHS. With over 1 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99. Plus, with over 1 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$31.99
(1)
Litens Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter, 900055A
“Good product at a decent price”
Popular Dayco 2000 Chrysler LHS Belts and Hoses
Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2000 Chrysler LHS owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2000 LHS, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Dayco Belts and Hoses range from $20.29 to $32.99, plus, with more than 54 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$11.15
(5)
Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 10 Inch Length, 86096
“Works good.”
from
$32.99
(41)
Idler Pulley, Dayco, 89097
“Seems well made. Installed on 96 Jeep Grand Cherokee. Old pulley self-destructed and chewed up the mounting; I had to file this flat before the new ”
from
$20.29
(8)
"Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14"" Long, 1.25"" Diameter, D71977"
“Cheaper than OEM coolant hoses and last just as long as the OEM coolant hoses for a 1999 Chrysler 300M.”
FAQs for 2000 Chrysler LHS Belts and Hoses
Which Belts and Hoses are best-sellers for 2000 Chrysler LHSs?
Out of 22 Belts and Hoses that fit 2000 Chrysler LHSs, the following parts are the top sellers:
- Dayco Bottom Cog V-Belt 55 Inch Long, Exact Fit Premium Quality, 15550 (3300073) – $16.29
- Driveworks Poly Rib Belt Serpentine Belt 53 Long, 6 Rib Count, 530K6 (5062349) – $29.49
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14"" Long, 1.25"" Diameter, D71977" (12025398) – $20.29
What’s the price range for 2000 Chrysler LHS Belts and Hoses?
Belts and Hose prices for the 2000 Chrysler LHS start at $2.65 and go up to $59.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 2000 Chrysler LHS?
The average price for Belts and Hoses for the 2000 Chrysler LHS is $27.03. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Chrysler LHS model years?
What are the cheapest Belts and Hoses for my 2000 Chrysler LHS?
The cheapest 2000 Chrysler LHS Belts and Hoses we carry in stock are:
- Automotive V-Belt, Driveworks, 55015 (5060621) – $5.49
- Dayco Molded Heater Hose EPDM Rubber, 9/32 Inch Diameter, 16 Inch Length, 86830 (10844036) – $12.49
- Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 9 Inch Length, 88374 (19590381) – $14.49
- Dayco Molded Heater Hose EPDM Rubber, 23/32 Inch Diameter, 10 Inch Length, 88399 (19590521) – $14.49
- Dorman Idler Pulley (Pulley only), 419-602 (10041701) – $14.99
What are the top-rated Belts and Hoses that fit the 2000 Chrysler LHS?
Out of 107 reviews by customers, our 2000 Chrysler LHS Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2000 Chrysler LHS and their top-rated products:
- Serpentine and V Belts
- Driveworks Poly Rib Belt Serpentine Belt 53 Long, 6 Rib Count, 530K6 (5062349) – $29.49
- Idler Pulley, Dayco, 89097 (20130179) – $32.99
- Automotive V-Belt, Driveworks, 55015 (5060621) – $5.49
- Pulleys
- Driveworks Poly Rib Belt Serpentine Belt 53 Long, 6 Rib Count, 530K6 (5062349) – $29.49
- Idler Pulley, Dayco, 89097 (20130179) – $32.99
- Automotive V-Belt, Driveworks, 55015 (5060621) – $5.49
- Engine Cooling Hoses
- Driveworks Poly Rib Belt Serpentine Belt 53 Long, 6 Rib Count, 530K6 (5062349) – $29.49
- Idler Pulley, Dayco, 89097 (20130179) – $32.99
- Automotive V-Belt, Driveworks, 55015 (5060621) – $5.49
What types of Belts and Hoses do you sell for my 2000 Chrysler LHS?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 2000 Chrysler LHS:
Can I get help with 2000 Chrysler LHS Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Belts and Hoses and more.
What is your return policy for Chrysler LHS Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Chrysler LHS Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
