2000 Chevrolet Monte Carlo Performance and Racing Products
Find Your Specific 2000 Chevrolet Monte Carlo Performance and Racing Products
Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 2000 Monte Carlo. Advance Auto Parts has popular Monte Carlo parts like Performance Engines, Performance Suspension Products, Performance Air Intake Kits and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Monte Carlo model years including
1998,
1999,
2001,
2002,
2003,
2004,
2005,
2006,
2007 and more. Select a category of 2000 Chevrolet Monte Carlo Performance and Racing Products below and start saving instantly.
Popular 2000 Chevrolet Monte Carlo Performance and Racing Products Categories
Essential Performance and Racing Products for 2000 Chevrolet Monte Carlos
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1037)
from
$64.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Energy Suspension – Coil Spring Isolator Set (Part No.3.6108R)
from
$13.29
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Lasts from 3 to 10 Times Longer
- Assemble to Chassis Same Way as OEM
- Maintains Factory Ride Characteristics
- Simple Way to Increase Vehicle Height
Monroe – Strut-Mate Suspension Strut Mount (Part No.902968)
from
$96.99
Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
- EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter (Part No.57-3045)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam (Part No.11-234-3)
from
$259.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.12-242-2)
from
$251.99
HYDRAULIC – Xtreme Energy: Great for street machines, largest cam for stock converter, better with 2000 stall.
Product Features:
See More
Product Features:
- HYDRAULIC – Xtreme Energy: Great for street machines, largest cam for stock converter, better with 2000 stall.
- 268/280 Advertised Duration, 224/230 Duration @ .050″, .477″/.480″ Lift, 110 Lobe Separation
- Valve spring upgrade required
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Dynomax – Exhaust Intermediate Pipe (Part No.54276)
from
$74.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Exhaust Y Pipe (Part No.53202)
from
$137.99
Made from aluminized steel for durability, DynoMax direct fit Y-pipe is manufactured with precision bends and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from quality 16-gauge aluminized steel for durability and long life
- BUILD IT YOURSELF : Design and custom fabricate your own exhaust system with DynoMax pipe
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Russell – Street Legal, Monte Carlo (Part No.692080)
from
$87.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Russell – Street Legal, Monte Carlo (Part No.692100)
from
$65.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 396-402-427-454 V8 (Part No.5895)
from
$266.99
Product Features:
See More
- Non-Rotator
- 1.500 in. Outside Diameter
- 1.082 in. Inside Diameter
- 1.340 in. Coil Blind
- Set of 16
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)
from
$159.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Non-Rotator Style: Dyno Tested and Street Proven
- Great Match to Edelbrock Camshaft Kit
Edelbrock – Pushrod Set for S/B Chevy (Part No.9653)
from
$201.99
Edelbrock part #9653 Pushrods are designed for Chevy 348/409 “W” series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis
Product Features:
See More
Product Features:
- 7.2 in. Length
- 0.312 in. Diameter
- 4130 Chromoly Steel Material
- Black Oxide Finish
- Made In The USA
Competition Cams – Magnum 8.280" and 9.250" Long, .080" Wall, 3/8" Diameter Pushrod Set (Part No.7154-16)
from
$479.99
Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification. Available individually and in sets of 8 or 16.
Product Features:
See More
Product Features:
- 3/8″ Diameter, 8.280″ intake length (qt. 8), 9.250″ exhaust length (qt.8) for Big Block Chevy
- One-piece .080″ wall chromemoly steel tubing
- Heat-treated for extended durability and guide plate compatibility
- Precision formed and reinforced pushrod end
- Black-oxide finished with laser-etched part number and length
Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)
from
$199.99Product Features:
- Case-Hardened Tubing
- Welded Ends
- 5/16 in. Diameter
- Use with or without Hardened Steel Guideplates
Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)
from
$77.99
Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.
Product Features:
See More
Product Features:
- Black Oxide Coated Grade 8 Steel
- Kit Contains 16 Studs
- Easy To Install
- Heat Treated Steel
- Grade 8 Steel
Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1074)
from
$101.99
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.
Product Features:
See More
Product Features:
- Black Oxide Coated Grade 8 Steel
- Kit Contains 16 Studs
- Easy To Install
- Heat Treated Steel
- Prevents Stud Flexing
- Black Plated Finish
Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)
from
$75.99
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.
Product Features:
See More
Product Features:
- They Are Zinc Dichromate Plated Steel
- They Have Black Oxide Coated Set Screws
- Keeps Rocker Arms Positively Locked
- (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
- Includes Locks and Hex Wrench
- Shank O.D. .603″
Competition Cams – Rocker Arms, Ultra Gold Small Block Chevy 1.6 1 St (Part No.19002-16)
from
$433.99
These COMP Cams Ultra-Gold Aluminum Roller Rocker Arms with a 3/8″ stud diameter and 1.6 ratio are designed for Chevrolet V8 265-400 applications. The new modern design features of these Ultra-Gold Rockers are proven to withstand extremely aggressive spring pressure and valve lift. Designed specifically for high performance street and race engines, the Ultra-Gold Aluminum Rocker Arms are precision CNC-machined to strict tolerances. Developed to meet the demands of professional engine builders, these rockers include features never before possible in an aluminum rocker arm.
Product Features:
See More
Product Features:
- CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
- Designed for high performance street and race engines
- Precision-sorted trunion bearings withstand elevated valve spring pressure and valve lift
- Additional clearance, up to 1.650″ O.D. valve spring
MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)
from
$70.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.
Product Features:
See More
Product Features:
- Externally mounted coil
- Increases reliability
- Increase performance
- High quality plastic
- Resist spark loss
- Use brass conductors
- Low resistance connections
- No modifications
MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)
from
$85.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.
Product Features:
See More
Product Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)
from
$73.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Replacement Coil For GM Dual Connector Coil
- Improved Turns Ratio
- Lower Primary Resistance
- Bolt-In replacement coil
- Produce More Output Voltage
- Smooth Idle
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Upgrade your 2000 Chevrolet Monte Carlo with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2000 Chevrolet Monte Carlo, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Monte Carlo functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Performance and Racing Products for the 2000 Chevrolet Monte Carlo, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Suspension Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2000 Chevrolet Monte Carlo at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $50.99 to $787.99, with
an average price of $180.41.
Our 19 Performance and Racing Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 2000 Chevrolet Monte Carlo without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Chevrolet Monte Carlo, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, K&N, Monroe, and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
K&N and Monroe also bring quality to the table, with Performance and Racing Products available starting at $96.99, and at an average 4.8 stars rating.
With 61 customer reviews and counting, our 2000 Chevrolet Monte Carlo Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 Chevrolet Monte Carlo is always ready to roll. We’re committed to providing you with everything you need to keep your Monte Carlo in top shape, all in one place.
Start shopping confidently below for your 2000 Chevrolet Monte Carlo!
Best-Selling Performance Engines for 2000 Chevrolet Monte Carlos
Enhance the driving experience in your Chevrolet with 11 quality Performance Engine components, starting at $50.99.
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)
from
$61.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Competition Cams – Xtreme Energy 210/220 Hydraulic Roller Cam for GM 3800/3.8L V6 (Part No.76-802-9)
from
$787.99
Xtreme Energy 210/220 Hydraulic Roller Cam for GM 3800/3.8L V6
Competition Cams – Xtreme Energy 201/205 Hydraulic Roller Cam for GM 3800/3.8L V6 (Part No.76-801-9)
from
$505.99
Xtreme Energy 201/205 Hydraulic Roller Cam for GM 3800/3.8L V6
Competition Cams – ENGINE ROCKER ARM (Part No.1617-12)
from
$399.99
ENGINE ROCKER ARM
Competition Cams – 12 Springs (Part No.26915-12)
from
$289.99
12 Springs
Competition Cams – Hi-Tech 7.050" Long, .080" Wall, 5/16" Diameter Pushrod Set of 12 (Part No.7937-12)
from
$211.99
Hi-Tech 7.050" Long, .080" Wall, 5/16" Diameter Pushrod Set of 12
Competition Cams – 12 Springs (Part No.26918-12)
from
$199.99
12 Springs
Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1601-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1602-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1617-1)
from
$50.99
ENGINE ROCKER ARM
Most Popular 2000 Chevrolet Monte Carlo Performance Suspension Products
Customize your Chevrolet with 1 Performance Suspension Products products
like Performance Coil Spring Insulators, all
priced under $96.99.
Monroe – Strut-Mate Suspension Strut Mount (Part No.902968)
from
$96.99
Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
- EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Top Picks for 2000 Chevrolet Monte Carlo Performance Air Intake Kits
Upgrade Chevrolet Monte Carlos with top-quality Performance Air Intake Kits parts, including 1 OEM and aftermarket selections for your 2000 model.
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter (Part No.57-3045)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
In-Demand Performance Ignition Products for 2000 Chevrolet Monte Carlos
Select from 2 premium Performance Ignition Products parts for your 2000 Chevrolet Monte Carlo, with prices ranging from $95.99 to $204.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Most Sold 2000 Chevrolet Monte Carlo Performance Exhaust Products
Explore our best-selling Chevrolet parts for the 2000 Monte Carlo among 2 OEM and aftermarket options starting from $74.99.
Dynomax – Exhaust Intermediate Pipe (Part No.54276)
from
$74.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Exhaust Y Pipe (Part No.53202)
from
$137.99
Made from aluminized steel for durability, DynoMax direct fit Y-pipe is manufactured with precision bends and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from quality 16-gauge aluminized steel for durability and long life
- BUILD IT YOURSELF : Design and custom fabricate your own exhaust system with DynoMax pipe
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Top-Rated Performance and Racing Products Brands For Your 2000 Chevrolet Monte Carlo
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2000 Chevrolet Monte Carlos. Below you’ll find some of our best rated Performance and Racing Products from Mallory, K&N, and Monroe, and more. Performance and Racing Products from these brands that fit a 2000 Monte Carlo start at just $95.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 2000 Chevrolet Monte Carlo Performance and Racing Products
When it comes to maintaining or upgrading your 2000 Chevrolet Monte Carlo, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 2000 Chevrolet Monte Carlo. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular K&N 2000 Chevrolet Monte Carlo Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2000 Chevrolet Monte Carlo owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 2000 Monte Carlo, Advance Auto Parts carries a full inventory of 1 K&N Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these K&N Performance and Racing Products range up to $367.99, plus, with more than 15 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$367.99
(15)
Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter
“5 Star Review”
FAQs for 2000 Chevrolet Monte Carlo Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2000 Chevrolet Monte Carlos?
Out of 19 Performance and Racing Products that fit 2000 Chevrolet Monte Carlos, the following parts are the top sellers:
- Strut-Mate Suspension Strut Mount (18570875) – $96.99
- Exhaust Intermediate Pipe (18371070) – $74.99
- Unilite Ignition Module (17350025) – $95.99
What’s the price range for 2000 Chevrolet Monte Carlo Performance and Racing Products?
Performance and Racing Product prices for the 2000 Chevrolet Monte Carlo start at $50.99 and go up to $787.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2000 Chevrolet Monte Carlo?
The average price for Performance and Racing Products for the 2000 Chevrolet Monte Carlo is $180.41. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Monte Carlo model years?
What are the cheapest Performance and Racing Products for my 2000 Chevrolet Monte Carlo?
The cheapest 2000 Chevrolet Monte Carlo Performance and Racing Products we carry in stock are:
- ENGINE ROCKER ARM (50272821) – $50.99
- ENGINE ROCKER ARM (50272895) – $50.99
- ENGINE ROCKER ARM (50272847) – $50.99
- ENGINE ROCKER ARM (50272467) – $51.99
- Thermocap Radiator Cap (6900022) – $53.99
What are the top-rated Performance and Racing Products that fit the 2000 Chevrolet Monte Carlo?
Out of 61 reviews by customers, our 2000 Chevrolet Monte Carlo Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2000 Chevrolet Monte Carlo and their top-rated products:
- Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
- Performance Air Intake Kits
- Thermocap Radiator Cap (6900022) – $53.99
What types of Performance and Racing Products do you sell for my 2000 Chevrolet Monte Carlo?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2000 Chevrolet Monte Carlo:
Can I get help with 2000 Chevrolet Monte Carlo Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.
What is your return policy for Chevrolet Monte Carlo Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Chevrolet Monte Carlo Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
