2000 Chevrolet Express 3500 Fuel and Emissions Systems

Name: 2-Way Female Black Multi-Purpose Pigtail
Brand: GM Genuine Parts
SKU: PT288
Price: 59.99 USD

Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 2000 Express 3500. Advance Auto Parts has popular Express 3500 parts like Fuel Pumps, Fuel Injectors, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Express 3500 model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2000 Chevrolet Express 3500 Fuel and Emissions Systems below and start saving instantly.

Popular 2000 Chevrolet Express 3500 Fuel and Emissions Systems Categories

Fuel Pump Driver Modules

Diesel Injector Driver Modules

Fuel Tank Attaching Hardware

Fuel Tank Cleaning Kits

Air Flow Meters and Mass Air

Vapor Canister Purge Valves

Vapor Canister Vent Solenoids

Fuel Lift Pumps

Fuel Injector Installation Kits

Fuel Injection Pumps

MAP-Barometric Pressures

Smog Pumps

Secondary Air Injection Pipe Retainer

Manifold Air Pressure Sensors

Canister Purge Solenoids

Ambient Air Temperature Sensor Connectors

Fuel Tank Pressure Sensors

Water In Fuel Sensors

Pressure Regulators

Air Charge Temperature Sensors

Fuel Injection Idle Air Control Valves

Fuel Injector O-Ring Kits

Electric Pump Filter and Strainers

Smog and Vacuum Pump Pulleys

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

EGR Lines

Fuel Tank Lock Rings

Diesel Fuel Injector Pump Driver Relocation Kits

Fuel Tank Vent Valves

Secondary Air Injection Relays

Secondary Air Injection Control Valves

Mass Air Flow Sensor Connectors

Fuel Injector Pump Resistors

Fuel Pump Tank Seals

Injector Retaining Brackets

Oxygen Sensor Connectors

Idle Air Control Valve Connectors

EGR Tubes

EGR Valve Gaskets

Diesel Fuel Line Seal Rings

Fuel Pump Driver Module Connectors

Fuel Pump Harness Connectors

Secondary Air Injection Pump Connectors

Ambient Air Temperature Sensor Clip

Vapor Canister Purge Solenoid Connectors

EGR Valve Connectors

Manifold Absolute Pressure Sensor Seals

Fuel Injection System

Fuel Injector Set

Fuel Cap Tester Adapters

Fuel Pump Harness

Fuel Injection Pump Installation Kits

Fuel Injection Pump Mounting Gaskets

Mass Air Flow Sensor Relay Connector

Air Injection Bypass Valve Solenoid Connector

Air Injection Bleeder Valve Solenoid Connector

Fuel Injection Idle Speed Stabilizer Connectors

Essential Fuel and Emissions Systems for 2000 Chevrolet Express 3500s

from

$59.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$54.99

This replacement water-in-fuel (WiF) sensor matches the function and performance of the original equipment sensor to prevent water damaging a diesel fuel injector. Made of quality materials, it has undergone extensive testing to ensure durability.

Product Features:

Ideal replacement – this water-in-fuel (WiF) sensor matches the original equipment sensor’s function and performance
Durable construction – this sensor is made of durable materials to withstand exposure to diesel fuel
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone vehicle try-on and bench testing to ensure a quality fit and long service life

from

$31.49

GM Genuine Parts Manifold Absolute Pressure (MAP) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Sends signals to the engine controls for optimal engine performance
Designed to adjust engine performance to various altitudes
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$37.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
100% O Ring replacement
Delphi engineered to meet customer expectations
Manufactured to meet or exceed OE requirements

from

$70.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$27.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$289.99

Fuel Pump Driver Modules are the most common part to fail on computer-controlled diesel engines. The most common design failure is related to high operating temperatures and the ability of the module to handle heat. CARDONE 100 percent New Fuel Pump Driver Modules are engineered with higher quality materials that create and retain less heat -providing better performance and reliability.

Product Features:

Each unit is 100 percent computer-tested under high temperatures to meet real-world conditions.
All components used are “Automotive Grade” and have been tested to meet the harsh environment of automotive applications.
Fuel Injector Pump Resistor available, where applicable (sold separately).
Fuel Injector Pump Resistor available, where applicable (sold separately)

from

$28.49

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$18.99

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$84.99

Carquest Premium idle air control valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Idle air control valves, or sometimes known as idle air motors, are used to maintain the engine speed at idle by precisely adjusting the amount of air allowed to enter the intake. Our Carquest Premium idle air control (IAC) valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium idle air control valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium idle air control valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$108.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$157.99

GM Genuine Parts Fuel Injectors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These fuel injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$53.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.

from

$15.79

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$66.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$199.99

This vapor canister has been made to match the original equipment evap canister on certain vehicle years, makes and models, properly restoring emissions controls.

Product Features:

Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles
Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$42.99

Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.

Product Features:

Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
Meets or exceeds all OEM specifications

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$61.99

Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Controls vapor flow from canister to engine
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$1.59

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$45.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$36.99

Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.

Product Features:

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$67.99

CARDONE Fuel Injection Pump Installation Kits provide the option of not replacing the entire oil rail, providing an easy fix and saving you hundreds of dollars. Paired with CARDONE’s premium Oil Rail Removal Tool (2K-205T), this repair kit allows technicians and vehicle owners to repair expensive high-pressure oil issues in a fraction of the time.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$104.99

This vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2500.99

The Edelbrock Pro-Flo 4 EFI Kit No. 35780 for Small-Block Chevy engines with Vortec/E-Tec cylinder heads is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with wire harnesses and ECU. The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads. This kit uses 29 lb/hr injectors and is rated for 450 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner application’s initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner App then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner App takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather. The E-Tuner App provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

Product Features:

High-performance Victor-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body.
All supporting sensors are included along with wire harnesses and ECU.
The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications.
The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads.
This kit uses 29 lb/hr injectors and is rated for 450 horsepower at 58 PSI of fuel pressure.
Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner application’s initial programming.
Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner App then selects the most appropriate base calibration.
Once the base calibration is set, the self-learning E-Tuner App takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather.
The E-Tuner App provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for.
The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

from

$35.99

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$14.99

Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.

Product Features:

Engineered to meet or exceed all OEM specifications
Precision stamped and are treated with a rust proof finish to ensure durability and strength

from

$16.99

This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
Durable construction – recommended for replacement when the fuel pump or sensor is replaced
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 2000 Chevrolet Express 3500 with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2000 Chevrolet Express 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Express 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 188 Fuel and Emissions Systems for the 2000 Chevrolet Express 3500, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2000 Chevrolet Express 3500 at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.59 to $2,878.99, with an average price of $105.68. Our 188 Fuel and Emissions Systems in stock come from 19 trusted brands, so you’re sure to find the right part for your 2000 Chevrolet Express 3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Chevrolet Express 3500, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium, Carquest, Delphi, and more. Carquest Premium Fuel and Emissions Systems start at just $11.99 and boast an impressive 4.4 stars average rating from customers. Carquest and Delphi also bring quality to the table, with Fuel and Emissions Systems available starting at $20.49, and at an average 4.4 stars rating. With 5,724 customer reviews and counting, our 2000 Chevrolet Express 3500 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Chevrolet Express 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your Express 3500 in top shape, all in one place. Start shopping confidently below for your 2000 Chevrolet Express 3500!

Best-Selling Fuel Pumps for 2000 Chevrolet Express 3500s

Enhance the driving experience in your Chevrolet with 32 quality Fuel Pump components, starting at $16.99.

show more show less

from

$261.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$221.99

Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Carquest or Airtex fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every Carquest or Airtex Fuel Pump to deliver greater reliability.

Product Features:

All Carquest fuel pumps are designed to meet or exceed OE specs and are 100% tested to ensure performance and long-life.
High-efficiency turbine technology provides quiet and precise fuel delivery
Carbon commutator technology provides improved durability and robust performance for gasoline and flexible fuel
Carquest fuel pump features external rubber feet for enhanced stability and reduced noise from vibration.
Carquest Fuel Pump has modified return porting to increase flow resulting in lower failure rates. Upgraded convoluted tubing improves durability to resist tube wear failure and create longer life.

from

$194.99

Product Features:

All CARQUEST fuel pumps are designed to meet or exceed OE specs and are 100% tested to ensure performance and long-life.
High-efficiency turbine technology provides quiet and precise fuel delivery
Carbon commutator technology provides improved durability and robust performance for gasoline and flexible fuel
CARQUEST fuel pump features external rubber feet for enhanced stability and reduced noise from vibration.
CARQUEST Fuel Pump has modified return porting to increase flow resulting in lower failure rates. Upgraded convoluted tubing improves durability to resist tube wear failure and create longer life.
CARQUEST strainer uses polyester material to ensure filtration performance meet or exceed OE requirements.

from

$159.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$307.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$18.99

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$169.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$102.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$119.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$33.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$289.99

Each unit is 100 percent computer-tested under high temperatures to meet real-world conditions.
All components used are “Automotive Grade” and have been tested to meet the harsh environment of automotive applications.
Fuel Injector Pump Resistor available, where applicable (sold separately).
Fuel Injector Pump Resistor available, where applicable (sold separately)

from

$193.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$299.99

This replacement fuel pump driver module is made in the USA with the latest technological advancements featured in original equipment modules, including a redesigned circuit board and higher temperature rated components to improve durability.

Product Features:

Advanced replacement – this fuel pump driver module matches the latest original manufacturer technology for certain vehicles
Durable components – features materials with higher temperature ratings to increase reliability
Improved design – circuit board and heat sink both redesigned to solve issues in older OE designs
Made in USA – newly manufactured at an advanced facility in the United States

from

$248.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$91.99

GM Genuine Parts Electrical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These pumps deliver fuel to your vehicle’s fuel injectors, helping to provide a steady, reliable fuel supply to your vehicle’s engine. Electric pumps are offered in standard turbine or modular assembly as specified for each application. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$71.99

Product Features:

Original equipment fit, form and function

from

$265.99

Meet or exceeds OE requirements
Transfers fuel within the tank
Does not include primary fuel pump

from

$16.99

Each wire harness is designed to meet or exceed the performance of the original unit
Engineered with the same stringent standards applied to the parts we make for the top global OEMs
Delphi wire harnesses are designed and reliably work for the life of your fuel system
Wiring harness is designed to correct known application issues

from

$1344.99

CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Does not include Pump Mounted Driver (PMD)

from

$1333.99

Each unit is 100% tested to OE specifications
Includes 100% replacement of Pump Mounted Driver (PMD)

from

$299.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$289.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$281.99

This fuel pump module assembly matches the fit and function of the original parts in specific vehicles. Built from durable materials, this pump is designed to be reliable over a long service life.

Product Features:

Direct replacement – this fuel pump assembly matches the fit and function of the original equipment fuel pump on specified vehicles
Durable construction – this fuel pump is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this fuel pump assembly has undergone rigorous testing to ensure reliable performance

from

$232.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

Most Popular 2000 Chevrolet Express 3500 Fuel Injectors

Customize your Chevrolet with 37 Fuel Injectors products like Air Flow Meters and Mass Air, Fuel Injectors, and Fuel Injector Gaskets, all priced under $2,878.99.

show more show less

from

$113.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$121.99

This diesel fuel injector pump driver relocation kit is designed to match the original components required to relocate the fuel injector pump on specified vehicles. It’s made of quality components for reliable performance.

Product Features:

Direct replacement – this diesel fuel injector pump driver relocation kit is designed to match the original components required to repair the fuel injector pump on specified vehicles
Ideal solution – this kit is a reliable replacement for original components
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$82.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Application-specific to ensure the proper fit and form
Precision-engineered pressure regulators for proper fuel delivery and engine performance
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$21.29

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$99.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100 percent re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100 percent re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100 percent tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$112.99

ACDelco GM Original Equipment Fuel Injection Pressure Regulators are mechanical valves that control fuel pressure in the fuel injector rail, and are GM-recommended replacements for your vehicle’s original components. Their spring-loaded valves return excess fuel back to the fuel tank. These original equipment fuel injection pressure regulators have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Helps provide constant fuel pressure to the injectors
Assists in cold engine starts
Helps maintain stable engine idle
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$3.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$69.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$83.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.

Product Features:

Application matched components ensure fuel injection system meets all emission regulations.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$95.99

Precision is key for the fuel pressure regulator on any vehicle. At Delphi, we use OE engineering to test our regulators and fuel technologies to ensure the utmost performance and durability. Our Nitrile¿ diaphragms are resilient against high-ethanol fuels, and we utilize two designs to help meet emissions standards while covering a wide array of domestic vehicles. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management. Visit our Resource Center for helpful tips and tricks on fuel pumps technologies and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$139.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$95.99

CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:

Premium OE quality materials
Includes copper combustion seal

from

$104.99

Helps provide constant fuel pressure to the injectors
Assists in cold engine starts
Helps maintain stable engine idle
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$73.99

CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:

Premium OE quality materials
Includes copper combustion seal

from

$207.99

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$71.99

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$37.99

Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
100% O Ring replacement
Delphi engineered to meet customer expectations
Manufactured to meet or exceed OE requirements

from

$23.99

GM Genuine Parts Fuel Injector Retaining Brackets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$32.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
For engines having a plenum chamber (upper intake manifold).
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$7.79

GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent excess air form entering the intake
Helps seal the intake and throttle from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$103.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$31.49

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$145.95

An ACDelco GM Original Equipment Fuel Injection Pressure Regulator is a GM-recommended replacement for your vehicle’s original component. The Fuel Injection Pressure Regulator is a mechanical valve that controls the fuel pressure in the fuel injector rail. The spring-loaded valve returns excess fuel back to the fuel tank. This original equipment fuel injection pressure regulator has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Fully tested against leaks
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

Top Picks for 2000 Chevrolet Express 3500 Air Flow Sensors

Upgrade Chevrolet Express 3500s with top-quality Air Flow Sensors parts, including 19 OEM and aftermarket selections for your 2000 model.

show more show less

from

$67.05

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$89.99

ACDelco GM Original Equipment Manifold Absolute Pressure (MAP) Sensors measure intake manifold pressure, and are GM-recommended replacements for your vehicle’s original components. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. These original equipment manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Sends signals to the engine controls for optimal engine performance
Designed to adjust engine performance to various altitudes
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$37.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$20.49

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Delphi temperature sensors are built with the latest OE technology
Delphi temperature sensors are impervious to electrical noise and interference
Part is validated, tested and matched to the right vehicle application
Our temperature sensors feature a 1 piece design from sensing element tip to connector terminals to eliminate internal connectors and failure points

from

$37.99

ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$66.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$4.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$25.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.

from

$81.99

The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.

from

$33.99

ACDelco GM Original Equipment Air Charge Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$34.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$29.99

The Air Charge Temperature Sensor is used by the Engine Control Unit (ECU) to measure air density for fuel mixture control, which allows it to make continuous adjustments to the engine’s air or fuel mixture for maximum fuel efficiency.
NTK’s Air Charge Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of air temperature entering the engine.

from

$28.49

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$13.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$54.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$106.99

Manifold Absolute Pressure Sensor

from

$55.99

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$30.49

Delphi temperature sensors are built with the latest OE technology
Delphi temperature sensors are impervious to electrical noise and interference
Part is validated, tested and matched to the right vehicle application
Our temperature sensors feature a 1 piece design from sensing element tip to connector terminals to eliminate internal connectors and failure points

from

$13.99

GM Genuine Parts Manifold Absolute Pressure Sensor Seals are designed, engineered, & tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

In-Demand Gas Caps for 2000 Chevrolet Express 3500s

Select from 26 premium Gas Caps parts for your 2000 Chevrolet Express 3500, with prices ranging from $7.99 to $31.99.

show more show less

from

$15.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$11.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$16.79

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$12.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$17.79

Product Features:

Manufactured from durable, long-life materials
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Independently tested for emission control
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$12.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Product Features:

Reduces air pollution with proper sealing and venting
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$7.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$31.99

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$24.29

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$24.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$11.79

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$22.99

Product Features:

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$20.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

Most Sold 2000 Chevrolet Express 3500 Oxygen Sensors

Explore our best-selling Chevrolet parts for the 2000 Express 3500 among 11 OEM and aftermarket options starting from $41.99.

show more show less

from

$59.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$67.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$75.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$64.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$56.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$87.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$158.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$128.99

Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$69.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$41.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$59.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Top-Rated Fuel and Emissions Systems Brands For Your 2000 Chevrolet Express 3500

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2000 Chevrolet Express 3500s. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium, Carquest, and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 2000 Express 3500 start at just $11.99 and are rated as high as 4.4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2000 Chevrolet Express 3500 Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2000 Chevrolet Express 3500, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 2000 Chevrolet Express 3500. With over 3 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99, with an average price of just $47.26. Plus, with over 14 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $113.99

(7)

Mass Air Flow Sensor (MAF) – 100% NEW

“Works as it should. Old just died. Appeared to be original (99 vette) as soon as I popped on (in parking lot) back in business. I did however since ca”

from $15.79

(4)

Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack

“Good”

from $11.99

(3)

Keyed Alike Locking Fuel Cap

“Worked fine”

Popular Carquest 2000 Chevrolet Express 3500 Fuel and Emissions Systems

Carquest auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2000 Chevrolet Express 3500 owner should feel confident when installing genuine Carquest parts in their vehicle. To ensure the best fit and performance for your 2000 Express 3500, Advance Auto Parts carries a full inventory of 3 Carquest Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Carquest Fuel and Emissions Systems range from $22.99 to $435.99, plus, with more than 8 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $29.99

(5)

Steel Fuel Tank Lock Ring

“Perfect replacement for my 2004 Trailblazer Ext Lt.”

from $22.99

(2)

Fuel Tank Lock Ring

“Works. Given the rusted condition of the old one, replacing it was pretty much a no-brainer.”

from $435.99

(1)

Steel Fuel Tank

“Great quality, way cheaper than Dealership, can’t beat good parts and easy checkout.”

FAQs for 2000 Chevrolet Express 3500 Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2000 Chevrolet Express 3500s?

Out of 188 Fuel and Emissions Systems that fit 2000 Chevrolet Express 3500s, the following parts are the top sellers:

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Fuel Injector O-Ring Kit (3504360) – $8.49
Non-Locking Fuel Tank Cap (18481527) – $17.79

What’s the price range for 2000 Chevrolet Express 3500 Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2000 Chevrolet Express 3500 start at $1.59 and go up to $2,878.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2000 Chevrolet Express 3500?

The average price for Fuel and Emissions Systems for the 2000 Chevrolet Express 3500 is $105.68. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Express 3500 model years?

Yes, we currently carry Fuel and Emissions Systems for 28 model years of Chevrolet Express 3500s between 1996 and 2025. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Fuel and Emissions Systems for my 2000 Chevrolet Express 3500?

The cheapest 2000 Chevrolet Express 3500 Fuel and Emissions Systems we carry in stock are:

Rivet-Push In-Hole Diameter .250 In. (sold by each) (22142348) – $1.59
Fuel Pump Mounting Gasket (19780020) – $2.79
Exhaust Gas Recirculation (EGR) Valve Gasket (19780009) – $2.99
Exhaust Gas Recirculation (EGR) Valve Gasket (12521989) – $2.99
Fuel Injector Seal Kit (11450036) – $3.99

What are the top-rated Fuel and Emissions Systems that fit the 2000 Chevrolet Express 3500?

Out of 5,724 reviews by customers, our 2000 Chevrolet Express 3500 Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2000 Chevrolet Express 3500 and their top-rated products:

Vapor Canister Purge Valves
- Vapor Canister Purge Valve (15730294) – $60.99

What types of Fuel and Emissions Systems do you sell for my 2000 Chevrolet Express 3500?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2000 Chevrolet Express 3500:

Can I get help with 2000 Chevrolet Express 3500 Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet Express 3500 Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Express 3500 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Chevrolet Express 3500 Fuel and Emissions Systems

GM Genuine Parts – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT288)

Dorman – Water In Fuel Sensor with Drain Valve (Part No.904-439)

GM Genuine Parts – Manifold Absolute Pressure (MAP) Sensor (Part No.25203477)

Delphi – Diesel Fuel Injector Installation Kit (Part No.7135-274)

Delphi – Electric Fuel Lift Pump: 12V, With 2 Female Blade Terminals (Part No.HFP955)

Dorman – GM Multi-Purpose Socket with Pigtails (Part No.645-500)

Cardone – Remanufactured Fuel Pump Driver Module (Part No.77-6382)

Carquest Premium – Multi-Use Connector (Part No.PTA1246)

Delphi – Fuel Pump Strainer (Part No.FS0031)

Carquest Premium – Idle Air Control Valve (Part No.ACC1026)

Carquest Premium – Multi-Use Connector (Part No.PTA2455)

GM Genuine Parts – Sequential Multiport Fuel Injector (Part No.19421333)

DENSO – Oxygen Sensor: 4 Wire, Direct Fit, Heated, Wire Length: 13.19" (Part No.234-8088)

Driveworks – Electrical Relay (Part No.83267)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1011)

Dorman – Evaporative Emissions Charcoal Canister (Part No.911-268)

Carquest Premium – Vapor Canister Purge Solenoid: Includes Mounting Hardware (Part No.CPC1031)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

GM Genuine Parts – Vapor Canister Purge Valve (Part No.214-1105)

Dorman – Rivet-Push In-Hole Diameter .250 In. (sold by each) (Part No.700-579)

GM Genuine Parts – 5-Way Female Gray Multi-Purpose Pigtail (Part No.PT1154)

Carquest Premium – Vapor Canister Vent Solenoid: Includes Mounting Hardware and Filter (Part No.CPC1099)

Cardone – Fuel Injection Pump Installation Kit (Part No.2K-103)

Dorman – Engine Vacuum Pump Pulley (Part No.300-702)

Edelbrock – Pro-Flo 4 EFI 4150-Style Kit No. 35780 For Chevy Small-Block with Vortec/E-Tec Heads (Part No.35780)

Dorman – Fuel Injector O-Ring Kit (Part No.904-135)

Carquest Premium – Fuel Tank Lock Ring LO1582924 (Part No.LO1582924)

Dorman – Fuel Pump Gasket (Part No.911-572)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Splices, Wire Harness (Part No.FG0099)

Carquest Premium – Fuel Pump Module Assembly (Part No.E3966MN)

Carquest Premium – Fuel Pump Module Assembly (Part No.E3971MN)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit, Wiring Harness and Strainer (Part No.M312884)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Splices, Wire Harness (Part No.FG0098)

Delphi – Fuel Pump Strainer (Part No.FS0031)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M319677)

Carquest Premium – Fuel Pump (Part No.E2496039)

Delphi – Electric Fuel Pump: 12V, Diesel, With 2 Female Pin Terminals (Part No.FD0031)

Carquest Premium – Multi-Use Connector (Part No.PTA1224)

Cardone – Remanufactured Fuel Pump Driver Module (Part No.77-6382)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M3246699)

Dorman – Diesel Fuel Pump Driver Module (Part No.904-104XD)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M3520846)

GM Genuine Parts – Electric Fuel Pump (Part No.EP1000)

Carquest Premium – Pump Mounted Driver Harness (Part No.AC20472)

Delphi – Fuel Transfer Unit (Part No.FG0082)

Delphi – Fuel Pump Wiring Harness (Part No.FA10003)

Carquest Premium – Remanufactured Diesel Fuel Injection Pump without PMD (Part No.AM9101L3)

Carquest Premium – Remanufactured Diesel Fuel Injection Pump (Part No.AM91013)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Splices, Wire Harness (Part No.FG0100)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Splices, Wire Harness (Part No.FG0108)

Dorman – Fuel Pump Module Assembly (Part No.2630332)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M3520861)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ7209)

Dorman – Pump Driver Module Relocation Kit (Part No.904-113)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Carquest – Fuel Injection Pressure Regulator (Part No.24027)

Dorman – Help – Fuel Injector O-Ring Seal Kit (Part No.90000)

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-8308)

GM Genuine Parts – Fuel Injection Pressure Regulator Kit with Clip and Snap Ring (Part No.217-3073)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS017)

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1503)

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1070)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10021)

Spectra Premium – Mass Air Flow Sensor (Part No.MA101)

Carquest Premium – New Diesel Fuel Injector (Part No.AN11053)

GM Genuine Parts – Fuel Injection Pressure Regulator Kit with Regulator and Clips (Part No.19210686)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11053)

Delphi – Mass Air Flow Sensor (Part No.AF10057)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10075)

Delphi – Diesel Fuel Injector Installation Kit (Part No.7135-274)

GM Genuine Parts – Multi-Port Fuel Injector Bracket (Part No.93442096)

MAHLE Original – Fuel Injection Plenum Gasket (Part No.MS36560)

GM Genuine Parts – Fuel Injection Throttle Body Mounting Gasket (Part No.12570168)

Carquest Premium – PMD Mounting Kit (Part No.AC20672)

GM Genuine Parts – Fuel Injector O-Ring Kit with Brackets (Part No.217-451)

ACDelco – GM Original Equipment Fuel Injection Pressure Regulator (Part No.C3000446165ACD)

Driveworks – Manifold Absolute Pressure Sensor (Part No.31424)

ACDelco – Manifold Absolute Pressure (MAP) Sensor (Part No.213-796)

ACDelco – Multi-Purpose Pigtail (Part No.PT1357)