2000 Chevrolet Express 3500 Belts and Hoses

Essential 2000 Chevrolet Express 3500 Belts and Hoses

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409HP)

Coolant Connector - Inlet/Outlet 3/4In. Tube x 5/8In. Hose

from

$24.49
HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.

Product Features:
  • Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part
  • Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
  • Easy to install – matches the original equipment form and dimensions for a simple replacement
  • Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life
See More

Dayco – Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.D60930K1)

Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set

from

$99.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.

Product Features:
  • Custom engineered to cover 35 million problem drive vehicles in operation
  • Designed as an improvement over OE to address problematic drive systems
  • Features a specially designed serpentine belt with specific compounds that mitigate noise
See More

Gates – Premium Molded Coolant Hose (Part No.22210)

Premium Molded Coolant Hose

from

$15.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

ACDelco – Professional Molded Coolant Hose (Part No.G2000576657ACD)

Professional Molded Coolant Hose

from

$30.67
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

Carquest Premium – Fuel Injector Return Hose Kit (Part No.AL001)

Fuel Injector Return Hose Kit

from

$39.99
This complete kit includes necessary components to replace the fuel injector return lines and copper gaskets on the fuel injectors.

Product Features:
  • Includes fuel return line
  • Includes 8 fuel injector copper combustion seals
  • Includes 2 caps
  • Includes 2 clamps
  • Includes 2 plenum gaskets
  • Premium OE quality materials
See More

GM Genuine Parts – Engine Oil Cooler Hose Kit (Part No.20832452)

Engine Oil Cooler Hose Kit

from

$80.99
GM Genuine Parts Engine Oil Cooler Hose Assembly are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 76mm Dia., 28.7mm Width, 6 Grooves (Part No.89009)

Serpentine Idler/Tensioner Pulley; Polymer, 76mm Dia., 28.7mm Width, 6 Grooves

from

$24.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

GM Genuine Parts – Positive Crankcase Ventilation (PCV) Hose (Part No.12582227)

Positive Crankcase Ventilation (PCV) Hose

from

$40.99
GM Genuine Parts PCV Valve Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dayco – Serpentine Idler/Tensioner Pulley: Steel, 90mm Diameter, 30mm Width, 6 Grooves (Part No.89170)

Serpentine Idler/Tensioner Pulley: Steel, 90mm Diameter, 30mm Width, 6 Grooves

from

$60.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 90mm Dia., 30mm Width, Smooth (Part No.89027)

Serpentine Idler/Tensioner Pulley; Steel, 90mm Dia., 30mm Width, Smooth

from

$27.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Gates – DriveAlign½ Automatic Belt Drive Tensioner (Part No.39159)

DriveAlign½ Automatic Belt Drive Tensioner

from

$121.99
Product Features:
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
  • Torsional round spring design provides reliability as well as consistent tension
  • Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999010A)

Serpentine Belt Tensioner: 1 Piece

from

$62.99
This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. (*O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) Note: The dust shield protecting the bearing has been upgraded from the original design. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. This tensioner is supplied with a new OE style mounting bolt. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
See More

Dorman – Metal Fuel Line: 18" Long (Part No.800-907)

Metal Fuel Line: 18" Long

from

$101.99
This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:
  • Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks
  • Durable design – withstands tough underhood and undercar conditions
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.87613)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length

from

$9.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Molded 90 Degree Heater Hose (Part No.28468)

Molded 90 Degree Heater Hose

from

$16.99
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:
  • Resists electrochemical degradation and water permeation
  • Use with heater hose connectors and bulk heater hose to create custom assemblies
  • Compatible for coolant, air and water applications
  • EPDM tube and cover, synthetic fiber reinforcement
  • SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 29 1/2 Inch Length (Part No.86836)

Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 29 1/2 Inch Length

from

$33.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Premium Molded Coolant Hose (Part No.22362)

Premium Molded Coolant Hose

from

$48.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dorman – Help – Fuel Hose Clamp Kit (Part No.90099)

Fuel Hose Clamp Kit

from

$9.99
This fuel hose clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel hose clamp is designed to match the fit and function of the original clamp on specified vehicles
  • Restores functionality – this clamp is made to fit and fully restore part functionality after the original clamp fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 28.5" Long, 1.31" Diameter (Part No.E72345)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 28.5" Long, 1.31" Diameter

from

$46.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Coolant Hose (Part No.23729)

Premium Molded Coolant Hose

from

$99.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K061195)

Micro-V« Serpentine Drive Belt

from

$48.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (Part No.5040378)

Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count

from

$38.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dorman – Diesel Fuel Injection Return Hose and Clamps (Part No.904-101)

Diesel Fuel Injection Return Hose and Clamps

from

$44.99
This fuel hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel hose is designed to match the fit and function of the original hose on specified vehicles
  • Restores functionality – reliable replacement for an original hose that has failed due to heat and vibration
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Bando – Drive Belt (Part No.W10002440796BAN)

Drive Belt

from

$31.75
Drive Belt

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578706ACD)

Professional V-Ribbed Serpentine Belt

from

$99.92
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
  • Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
  • Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
  • Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
  • Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
See More

Dayco – Poly Rib Serpentine Belt (Part No.W10001221355DAY)

Poly Rib Serpentine Belt

from

$52.22
Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:
  • Constructed with aramid-reinforced EPDM compounds
  • Engineered to conform to high mileage, worn or misaligned drives
  • Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000423328BAN)

Multi Rib (Serpentine) Belt

from

$41.33
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Dayco – Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count (Part No.5060870)

Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count

from

$52.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

2000 Chevrolet Express 3500 Belts and Hoses

You count on your 2000 Chevrolet Express 3500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 115 Belts and Hoses ranging in price from $1.49 to $120.11, you’re sure to find everything you need for your 2000 Chevrolet Express 3500.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 11 different brands like Dayco, Driveworks, and Litens. 2000 Chevrolet Express 3500 Belts and Hoses start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 6,354 extensive product reviews on 2000 Chevrolet Express 3500 Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count with 4.5 stars and Poly Rib Belt Serpentine Belt; 99.5 Long, 6 Rib Count with 4.7 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2000 Chevrolet Express 3500 below to get started!

Top-Rated Belts and Hoses Brands For Your 2000 Chevrolet Express 3500

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2000 Chevrolet Express 3500 running right for years to come. In our inventory you’ll find brands like Dayco, Driveworks, Litens, and even more.

Popular Gates Belts and Hoses

You’ll find popular Gates brand products across Serpentine and V Belts. All are waiting to get your 2000 Chevrolet Express 3500 back on the road. Some of the top-rated Gates products in these categories are:

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2000 Chevrolet Express 3500, and some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count
from $58.99
(268)
Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count
Serpentine Belts

FAQs for 2000 Chevrolet Express 3500 Belts and Hoses

What are the most purchased Belts and Hoses for the 2000 Chevrolet Express 3500?

Out of 115 Belts and Hoses for the 2000 Chevrolet Express 3500, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
from $31.99
(47)
Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
Serpentine Belts

What are the top-rated 2000 Chevrolet Express 3500 Belts and Hoses?

Top-rated Belts and Hoses for your 2000 Chevrolet Express 3500 based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
from $53.99
(138)
Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
“Perfect fit”
Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves
from $31.99
(88)
Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves
“Fit my 99 Explorer 5.0 perfectly and works just fine.”