2000 Chevrolet C3500HD Ignition and Tune-Up Products

Name: Multi-Use Connector
Brand: Carquest Premium
SKU: PTA1163
Price: 27.99 USD

Below you will find various in-demand Chevrolet Ignition and Tune-Up Products, components and accessories for your 2000 C3500HD. Advance Auto Parts has popular C3500HD parts like Ignition Wires, Ignition Coils and Boots, Distributors and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other C3500HD model years including 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002 and more. Select a category of 2000 Chevrolet C3500HD Ignition and Tune-Up Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2000 Chevrolet C3500HD Ignition and Tune-Up Products Categories

Standard Spark Plug Wires

Ignition Pickup and Stators

Knock Sensors

Distributor Cap Kits

Ignition Module and Controls

Distributor Rotor Buttons

Ignition Coil Connectors

Ignition Starter Switches

Distributor Small Parts

Glow Plug Relays

Ignition Wire Holders

Essential Ignition and Tune-Up Products for 2000 Chevrolet C3500HDs

from

$27.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$6.05

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$20.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Magnet size and strength optimized for precise signal output.
Precision-wound coated copper windings increase signal output and increase longevity.
Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$3.29

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Fel-Pro Oil Pan SnapUps 8mm bolts
Designed to hold up the pan and gasket, for one person installation
Engine$aver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$10.99

Autolite® Glow Plugs are engineered to warm the combustion chamber to ensure proper fuel ignition, leading to quicker and more seamless startups.

Product Features:

Designed with a nickel-chrome alloy that enables the plug to reach high heat intensity quickly, for reliable cold starts.
The sheathed coil heaters provide improved pre-heating and quicker starts.
Its precision machined nickel-plated threads with no burring allow for easy installation.
For dependability and long-lasting performance, use Autolite glow plugs

from

$51.99

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

from

$101.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

from

$71.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

from

$4.99

Autolite Platinum spark plugs are crafted for superior performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, and enhanced fuel efficiency. The platinum design prevents gap erosion, extending service life, while the high alumina ceramic insulator offers excellent thermal conductivity and insulation for added strength. A multi-rib insulator minimizes flash-over, and the nickel-plated shell resists corrosion for long-lasting reliability. With a standard center electrode design and long projection, these performance-grade spark plugs deliver consistent ignition and improved acceleration. The tapered seat type and resistor functionality further enhance compatibility and efficiency, making them a dependable choice for maintaining engine health and optimizing performance.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
The tapered seat type design ensures optimal compatibility and improved efficiency, contributing to reliable engine performance.

from

$10.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-enhanced alloy technology center electrode ensures superior wear resistance for extended performance longevity.

from

$72.99

The Diesel Glow Plug Controller is an application specific item specifically designed to control all aspect of glow plug operation.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$77.99

The Diesel Glow Plug Controller is an application specific item specifically designed to control all aspect of glow plug operation.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$29.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$31.49

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$67.99

ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$82.99

ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$155.99

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$142.99

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$69.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$33.99

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$39.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$39.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty (limited). Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$61.99

Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Trivalent iridescent chromate plating prevents corrosion
Silicone seals prevent moisture intrusion preventing false codes and sensor failure
Wiring harnesses utilize high-temperature insulation when applicable
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$80.99

ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Sends signals to the engine control module (ECM) to adjust timing
Helps prevent damage to the engine caused by pre-ignition
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$7.29

GM Genuine Parts Spark Plug Wire Holders are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$151.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$34.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$29.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Upgrade your 2000 Chevrolet C3500HD with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2000 Chevrolet C3500HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your C3500HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Ignition and Tune-Up Products for the 2000 Chevrolet C3500HD, designed to meet your needs without breaking the bank. From Ignition Wire replacements to Ignition Coils and Boots upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2000 Chevrolet C3500HD at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $2.29 to $182.99, with an average price of $41.82. Our 58 Ignition and Tune-Up Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 2000 Chevrolet C3500HD without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Chevrolet C3500HD, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, ACDelco, DENSO, and more. NGK Ignition and Tune-Up Products start at just $7.49 and boast an impressive 4.8 stars average rating from customers. ACDelco and DENSO also bring quality to the table, with Ignition and Tune-Up Products available starting at $3.49, and at an average 4.7 stars rating. With 1,956 customer reviews and counting, our 2000 Chevrolet C3500HD Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Chevrolet C3500HD is always ready to roll. We’re committed to providing you with everything you need to keep your C3500HD in top shape, all in one place. Start shopping confidently below for your 2000 Chevrolet C3500HD!

Best-Selling Ignition Wires for 2000 Chevrolet C3500HDs

Enhance the driving experience in your Chevrolet with 2 quality Ignition Wire components, starting at $7.29.

show more show less

from

$69.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$7.29

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Most Popular 2000 Chevrolet C3500HD Ignition Coils and Boots

Customize your Chevrolet with 9 Ignition Coils and Boots products like Ignition Coils, Ignition Coil Boots, and Ignition Coil Connectors, all priced under $179.99.

show more show less

from

$49.99

As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$71.99

An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the airfuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$49.99

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to insert power into spark plugs to ensure fast starts, consistent engine performance and optimized fuel efficiency
Delphi uses smart winding process techniques to controls wire lengths, keeping voltage the same
We manufacture our ignition coils with a high quality wire coating that resists imperfections that lead to failure

from

$39.99

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$48.49

Coils are designed and engineered to be an OE quality replacement for fit and performance
High-strength dielectric epoxy and 100% copper windings used to deliver high-temperature performance and vibration resistance
High-efficiency laminations produce a high-energy spark and reliable performance
Factories use ISO 9001 and IATF 16949 standards to deliver products designed to meet or exceed OE voltage output specifications
Top-quality components and materials used to deliver maximum performance and long service life under tough operating conditions
Long service life

from

$49.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$50.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$32.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$179.99

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

Top Picks for 2000 Chevrolet C3500HD Distributors

Upgrade Chevrolet C3500HDs with top-quality Distributors parts, including 9 OEM and aftermarket selections for your 2000 model.

show more show less

from

$3.29

Fel-Pro Oil Pan SnapUps 8mm bolts
Designed to hold up the pan and gasket, for one person installation
Engine$aver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$76.99

ACDelco GM Original Equipment Distributor Cap is a GM-recommended replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This original equipment cap will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$142.99

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$20.99

ACDelco Professional Distributor Rotor is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket rotor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$19.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$29.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$10.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$31.49

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$34.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

In-Demand Spark Plugs for 2000 Chevrolet C3500HDs

Select from 26 premium Spark Plugs parts for your 2000 Chevrolet C3500HD, with prices ranging from $2.29 to $19.99.

show more show less

from

$14.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered c

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

from

$7.29

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. With a platinum center and ground electrode tip, they are resistant to oxidation and arc erosion, ensuring long-lasting performance. The multi-rib insulator protects against misfire, and they are backed by Motorcraft’s Service Parts Warranty. Designed for exact fit in Ford, Lincoln, and Mercury vehicles, they also help prevent false check engine lights. With service intervals of up to 100,000 miles, Motorcraft Spark Plugs are crafted from high-quality materials to deliver reliable performance for almost any application, making them the same components that were in the vehicle when it was manufactured.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.
Enhanced Durability: Engineered with a platinum center and ground electrode tip, these spark plugs are resistant to oxidation and arc erosion, ensuring long-lasting performance.

from

$10.99

ACDelco GM Original Equipment Double Platinum Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. ACDelco GM Original Equipment parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies
Conical Seat Type: Equipped with a conical seat type for a secure fit and optimal performance.
Built-in Resistor: Includes a built-in resistor to reduce radio frequency interference and ensure reliable operation.

from

$3.49

The U-Groove Spark Plug with its patented U-groove ground electrode design ensures superior ignitability, allowing your engine to fire leaner mixtures for enhanced efficiency and performance. Built with a durable nickel center electrode tip, it delivers long-lasting performance while improving fuel consumption and emission gas purification. Precision machine-rolled threads minimize the risk of seizing or cross-threading, making it ideal for use in delicate aluminum heads. Designed to last twice as long as most conventional plugs, this spark plug is 100% pre-fired to guarantee reliable operation from the start. Its tapered seat type ensures a secure fit, and with a wide range of part numbers available, its compatible with thousands of applications, including classic and collector cars. Whether you’re maintaining a daily driver or restoring a vintage vehicle, this spark plug offers OE performance and exceptional value.

Product Features:

Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
Wide range of part numbers for thousands of applications, including classic and collector cars
Lasts twice as long as most conventional plugs
100 percent pre-fired to assure reliable operation
U-Groove Conventional
Durable Nickel Center Electrode Tip: Provides long-lasting performance and improved efficiency in emission gas purification and fuel consumption.

from

$19.99

NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center elect

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs

from

$11.99

BOSCH OE Fine Wire Double Iridium. All iridium plugs are NOT created equal. Give your customers the only one engineered for both high performance and long life. The ultra fine wire design and laser welded, tapered ground electrode deliver the ultimate in ignitability and high performance. The iridium-alloy center electrode firing pin and laser welded ground electrode with iridium alloy inlay help it to go the distance.

Product Features:

Double Iridium electrodes iridium firing pin and iridium ground electrode inlay offer higher performance and 4 times longer life compared to standard copper spark plugs.
OE Fine Wire design requires up to 24% less voltage to ignite
360 degree continuous laser welding increases durability for increased life
Copper core provides broader heat range to resist pre-ignition and fouling
Pre-gapped and nickel plated threads allow for quick installation without adjusting the gap or applying anti-seize
Tapered ground electrode allows for better ignition throughout the life of the spark plug
Customer satisfaction guarantee (visit www.boschautoparts.com/sparkplugs for details)

from

$7.49

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
V-Groove Tip Design: The unique V-Groove tip design of the TR55 model enhances ignitability and overall engine performance.
Lower Emissions: The NGK Laser Platinum Spark Plug contributes to lower emissions, supporting a cleaner and more environmentally friendly driving experience.

from

$8.49

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
Improved Fuel Efficiency: Designed to offer better fuel efficiency, the NGK G-Power Platinum spark plugs help you save on fuel costs.
Lower Emissions: These spark plugs contribute to lower emissions, making them an environmentally friendly choice.
Faster Starts and Quicker Acceleration: Experience faster starts and quicker acceleration with the advanced design of the NGK G-Power Platinum spark plugs.

from

$5.99

ACDelco GM Original Equipment Conventional Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies
High-Quality Copper Core: Designed with high-quality copper cores for reliable and efficient performance.
Nickel Center Electrode Tip: Features a nickel center electrode tip for enhanced durability and performance.
Outstanding Suppression Characteristics: Delivers reliable performance with excellent suppression characteristics.
OE Replacement: True Original Equipment parts installed during GM vehicle production, ensuring perfect fit, form, and function.

from

$13.99

The Iridium TT Spark Plug combines the durability of an OE-style plug with the power and torque of high-performance engineering, making it a standout choice for drivers seeking reliability and efficiency. Featuring a 0.4mm Iridium center electrode – the world’s smallest diameter – it maximizes firing potential, while the 0.7mm needle tip ground electrode promotes higher spark energy and minimizes heat quenching. Built with DENSO’s patented Iridium-Rhodium alloy formula, it boasts the highest concentration of Iridium for unmatched durability, withstanding temperatures over 4000 Deg F. The advanced Twin-Tip Technology pairs a fine wire Iridium center electrode with a needle tip Platinum ground electrode, ensuring superior ignition and fuel efficiency. Designed to enhance fuel economy and reduce emissions, this spark plug allows you to drive farther with fewer stops. Developed to original equipment specifications and utilizing a 360-degree laser welding process, it guarantees exceptional structural strength and consistent performance. Perfect for those who demand endurance and power in every drive.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT
Advanced Twin-Tip Technology: Combines a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for superior ignition and efficiency.
Enhanced Fuel Economy and Lower Emissions: Designed to provide better fuel economy and reduced emissions, allowing you to drive around the Earth over 4 times.
Original Equipment Specification: Developed from the Super Ignition Plug (SIP) design, ensuring reliable and consistent performance.

from

$4.99

The Platinum Spark Plug (AP605) is expertly crafted to deliver enhanced durability and performance for older engine applications. Featuring a platinum center electrode firing tip, it ensures quicker firing, smoother starts, and improved fuel efficiency while preventing gap erosion for a longer service life. Its high alumina ceramic insulator provides superior thermal conductivity and insulation, boosting strength and reliability under demanding conditions. The multi-rib insulator design effectively prevents flash-over, while the nickel-plated shell offers exceptional corrosion resistance, extending the plug’s lifespan. With a mid-projection standard center electrode and a tapered seat type, this performance-grade spark plug is built to optimize engine functionality. The combination of platinum and nickel materials in the electrode tips ensures consistent performance and durability, making it a dependable choice for maintaining acceleration and overall engine efficiency.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Built with a combination of platinum and nickel electrode tips to ensure consistent performance and enhanced durability for maintaining engine efficiency.

from

$3.99

Autolite Copper spark plugs are designed to provide quick starts and reliable performance, making them an essential upgrade for your vehicle. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are engineered for extended life, while the high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation strength. With a nickel-plated shell, these plugs resist corrosion, offering long-lasting durability. The tapered seat design ensures a perfect fit for easy and reliable installation. Built with a mid-projection standard center electrode and nickel tip materials, these regular-grade spark plugs deliver dependable performance. Equipped with a resistor, they are tailored to meet the demands of modern engines, providing the power and efficiency your vehicle needs.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
Perfect Fit: The tapered seat type ensures a perfect fit, making installation easy and reliable for your vehicle.

from

$9.99

The Iridium Power Spark Plug features the world’s smallest Iridium Center Electrode at just 0.4mm, delivering unmatched spark precision for maximum combustion efficiency. Engineered with a patented 360-degree laser welding assembly process, this spark plug ensures exceptional durability and reliability under extreme conditions. Its U-groove and taper-cut ground electrode design optimizes flame propagation, enhancing engine performance and fuel efficiency. Built to withstand temperatures exceeding 4000 Deg F, it is burnished with nickel plating for superior high-temperature endurance and corrosion resistance. Designed for versatility, it offers a wide range of part numbers to fit thousands of applications, including classic and collector cars. With its Iridium tip and tapered seat type, this spark plug is the ultimate choice for drivers seeking maximum spark energy, durability, and long-lasting performance.

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000 degree Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power

from

$7.99

ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
Pure copper core provides great heat transfer and helps maximize plug durability
Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
Ribless insulator helps optimize plug to boot seal
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
High-Quality Suppressors: ACDelco Gold RAPIDFIRE Spark Plugs feature high-quality suppressors that help prevent misfiring, ensuring reliable performance for everyday use.
Improved Plug to Boot Seal: Designed with an improved plug to boot seal, these spark plugs provide a secure fit, enhancing overall engine performance and longevity.

from

$6.99

The Double Platinum Spark Plug is engineered for exceptional durability and performance, making it a top choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring a longer service life compared to copper and standard platinum plugs. Its yttrium-enhanced ground electrode delivers superior heat transfer, maintaining durability under high temperatures and pressure. The high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. With a mid-projection center electrode and tapered seat type, this performance-grade spark plug is built to handle demanding conditions. Both the center and ground electrode tips are crafted from platinum, ensuring consistent ignition and enhanced efficiency. Designed to deliver value and reliability, this spark plug is a smart upgrade for those seeking improved engine performance and longevity.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Crafted with a mid-projection center electrode and tapered seat type, this spark plug is designed to handle demanding conditions, ensuring reliable performance and efficiency.

from

$2.29

The Copper Plus spark plug is engineered for dependable performance and durability, making it an ideal choice for maintaining engine efficiency. Featuring a copper core center electrode, it ensures accurate heat range control for extended lifespan and consistent wear. Its nickel center electrode tip enhances durability and reliability, while the tapered seat type design guarantees a secure fit and optimal performance. Built to ISO and SAE Standards, this spark plug offers proven performance and superior corrosion resistance, ensuring long-term reliability. As an OE replacement, it delivers the quality and functionality needed to keep your vehicle running smoothly. Whether you’re seeking improved conductivity or heat control, this standard-grade replacement spark plug is designed to meet your engine’s demands with precision and efficiency.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Nickel Center Electrode Tip: Equipped with a nickel center electrode tip, this spark plug offers superior durability and reliable performance, making it a dependable choice for maintaining engine efficiency.
Tapered Seat Type: The tapered seat type design of the Champion Copper Plus Spark Plug ensures a secure fit and optimal performance, contributing to the overall reliability of your engine.
OE Replacement: Designed as an OE replacement, the Champion Copper Plus Spark Plug guarantees dependable performance and durability, making it an ideal choice for maintaining your vehicle’s engine.

from

$11.99

Double Platinum Spark Plug PT16EPR-L13 is engineered to meet the highest OE standards for performance, durability, and emissions. Featuring OE-grade platinum on both center and ground electrodes, it ensures superior thermal conductivity and sustained spark performance for over 60,000 miles. The premium shell construction with machine-rolled threads enhances durability and provides a secure fit, while the tapered seat type ensures optimal compatibility with your engine. Designed to reduce secondary required voltage and increase ignition efficiency, this spark plug delivers reliable performance and helps minimize shop comebacks, ensuring customer satisfaction. With its double platinum design, it offers exceptional longevity and consistent ignition, making it a valuable addition to your vehicle’s ignition system.

Product Features:

OE grade platinum on both center and ground electrodes
Premium shell construction with machine-rolled threads
Superior thermal conductivity
Sustained spark performance over 60,000 miles
Reduced secondary required voltage, increased ignition efficiency
Satisfied customers, reduced shop comebacks
Double Platinum

from

$8.39

Champion Double Platinum Power spark plugs are engineered for drivers seeking enhanced performance and durability. Featuring a fine-wire platinum center electrode and a platinum pad ground electrode, these spark plugs deliver exceptional wear resistance and sharper spark focus for reliable ignition. The V-trimmed ground electrode ensures precise spark delivery, while the exclusive Heat-Active alloy maintains optimal operating temperatures under all engine loads, ensuring consistent performance. Designed as an OE replacement, these spark plugs guarantee compatibility and dependable operation for your vehicle. With their advanced double platinum construction, they provide greater ignitability, improved fuel efficiency, and a longer lifespan, making them a premium choice for maintaining peak engine performance.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
OE Replacement: Designed as an original equipment replacement, ensuring compatibility and reliable performance for your vehicle.

from

$6.59

The Platinum TT Spark Plug with its innovative Twin-Tip design ensures faster flame propagation, promoting more complete combustion for enhanced engine performance and efficiency. Crafted with a durable platinum center electrode tip, this spark plug offers exceptional longevity and consistent performance, making it a reliable choice for your vehicle. Its tapered seat type ensures a secure fit, reducing the risk of gas leakage and optimizing combustion chamber sealing. Designed for precision and durability, this spark plug not only improves ignition efficiency but also contributes to smoother engine operation and potentially better fuel economy. A perfect blend of advanced technology and robust materials, it delivers excellent value for drivers seeking long-lasting performance and reliability.

Product Features:

Innovative Twin-Tip design promotes faster flame propagation for more complete combustion, enhancing engine performance and efficiency.
Durable platinum center electrode tip ensures exceptional longevity and consistent performance over time.
Tapered seat type provides a secure fit, reducing gas leakage and optimizing combustion chamber sealing.
Precision-engineered to improve ignition efficiency, contributing to smoother engine operation.
Advanced design and robust materials deliver long-lasting performance and reliability for drivers.

from

$8.49

The Premium DiamondFire Automotive Spark Plug is engineered to deliver peak performance and efficiency for your vehicle. Featuring E3’s patented Diamond Fire edge-to-edge ground electrode, it ensures a faster, more complete burn for smoother acceleration and idle. The innovative “diamond-shaped” side wire electrode enhances combustion by quickly igniting the air/fuel mixture, resulting in a larger and faster flame kernel. This translates to improved power output by up to 6% on average and greater fuel efficiency, reducing engine carbon deposits and saving you money at the pump. Constructed with durable nickel for both the center and ground electrode tips, this spark plug is built to last. Its tapered seat design ensures a secure fit, and the pre-gapped configuration eliminates the need for adjustments, making installation hassle-free. Upgrade to the DiamondFire Spark Plug for cleaner combustion, enhanced engine performance, and long-term reliability.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

from

$12.99

ACDelco GM Original Equipment Iridium Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are our latest in spark plug technology and an exact replacement for your vehicle’s original components. Iridium composition provides a high melting point and great strength, and provides excellent wear resistance and durability. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Iridium is the latest in spark plug technology and is an exact replacement for vehicles original components
Iridium composition provides a high melting point and great strength, helps to provide excellent wear resistance and durability
Iridium offers excellent engine idle stability, reliable cold starting, quick acceleration and smooth performance
Three Piece Fired in Suppressor seal meters spark energy for long electrode life, helps prevent combustion leakage and helps block radio frequencies that can affect vehicle electronics
Iridium plugs are laser-welded which provides precision welds, reduces excess debris and wear rate, thus increasing durability
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies
Resistor Type: These spark plugs include a resistor, which helps in reducing electromagnetic interference.
Gasket Seat Type: Designed with a gasket seat type for a secure and reliable fit in your vehicle’s engine.

from

$10.99

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance.
Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience.
Tapered Seat Type: Ensures a secure fit and optimal performance in compatible engines.

from

$19.49

NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug, Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:

HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
Specialized OEM Tip Designs: Features DFE and PSPE tip designs for enhanced ignitability and efficiency.
Industry-Leading Durability: Ruthenium center electrode ensures long-lasting performance and reliability.

from

$13.99

The Champion Iridium Spark Plug is engineered for maximum performance and durability, making it the ultimate choice for high-performance engines. Featuring a fine-wire iridium center electrode and a platinum-enhanced ground electrode, this premium spark plug ensures sharper spark focus and greater ignitability for optimal engine efficiency. Its V-trimmed ground electrode design promotes precise spark delivery, while the Heat-Active alloy allows the electrodes to quickly reach and maintain stable operating temperatures under all engine loads. Built with a tapered seat and a resistor type design, this spark plug is crafted to deliver consistent performance and extended service life. Whether you’re looking to enhance your vehicle’s ignition system or maintain peak engine performance, the Champion Iridium Spark Plug offers unmatched reliability and value.

Product Features:

Champion Iridium – Maximum Performance. Premium Spark Plug
Iridium center electrode delivers maximum life
Fine-wire center electrode and V-trimmed for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Maintains stable operating temperature under all engine loads
Heat-Active alloy allows electrodes to reach optimal temperature quickly

Most Sold 2000 Chevrolet C3500HD Ignition Boots

Explore our best-selling Chevrolet parts for the 2000 C3500HD among 1 OEM and aftermarket options starting from $101.99.

show more show less

from

$101.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

Top-Rated Ignition and Tune-Up Products Brands For Your 2000 Chevrolet C3500HD

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2000 Chevrolet C3500HDs. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, ACDelco, and DENSO, and more. Ignition and Tune-Up Products from these brands that fit a 2000 C3500HD start at just $3.49 and are rated as high as 4.8 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 2000 Chevrolet C3500HD Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2000 Chevrolet C3500HD, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 2000 Chevrolet C3500HD. With over 3 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.49, with an average price of just $14.16. Plus, with over 558 customer reviews and an average rating of 4.8 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $7.49

(448)

V-Power Nickel Spark Plug (TR55): Enhanced Ignitability & Performance

“Easy swap…A+”

from $14.99

(103)

Iridium IX Spark Plug (TR55IX): Outstanding Acceleration & Durability

“Works great. perfect fit”

from $19.99

(7)

Laser Iridium Spark Plug (ITR4A15): Fine Wire Tip for High Efficiency

“Put it in and no problems since very nice plug”

Popular ACDelco 2000 Chevrolet C3500HD Ignition and Tune-Up Products

ACDelco auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 2000 Chevrolet C3500HD owner should feel confident when installing genuine ACDelco parts in their vehicle. To ensure the best fit and performance for your 2000 C3500HD, Advance Auto Parts carries a full inventory of 3 ACDelco Ignition and Tune-Up Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these ACDelco Ignition and Tune-Up Products range from $5.99 to $20.99, plus, with more than 344 customer reviews and an impressive 4.7 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $5.99

(150)

Conventional Spark Plug

“Excellent”

from $10.99

(13)

Double Platinum Spark Plug

“fit nice and runs nice”

from $20.99

(181)

Ignition Distributor Rotor

“Perfect fit”

FAQs for 2000 Chevrolet C3500HD Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2000 Chevrolet C3500HDs?

Out of 58 Ignition and Tune-Up Products that fit 2000 Chevrolet C3500HDs, the following parts are the top sellers:

Conventional Spark Plug (5392918) – $5.99
Iridium Spark Plug (15650436) – $12.99
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IT16TT (10713000) – $13.99

What’s the price range for 2000 Chevrolet C3500HD Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2000 Chevrolet C3500HD start at $2.29 and go up to $182.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2000 Chevrolet C3500HD?

The average price for Ignition and Tune-Up Products for the 2000 Chevrolet C3500HD is $41.82. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Chevrolet C3500HD model years?

Yes, we currently carry Ignition and Tune-Up Products for 10 model years of Chevrolet C3500HDs between 1991 and 2002. Ignition and Tune-Up Products are bought most frequently for the following model years: 2002, 2001, 1999, 1998, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Ignition and Tune-Up Products for my 2000 Chevrolet C3500HD?

The cheapest 2000 Chevrolet C3500HD Ignition and Tune-Up Products we carry in stock are:

Copper Plus Spark Plug (RS14YC6): Dependable Performance & Durability (5470001) – $2.29
Distributor Mounting Gasket (5785529) – $3.29
U-Groove Spark Plug: OE Performance, T16EPR-U15 (20650487) – $3.49
Copper Resistor Spark Plug: Quick Starts & Reliable Performance (5392276) – $3.99
Platinum Spark Plug (AP605): Enhanced Durability & Performance (5393949) – $4.99

What are the top-rated Ignition and Tune-Up Products that fit the 2000 Chevrolet C3500HD?

Out of 1,956 reviews by customers, our 2000 Chevrolet C3500HD Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2000 Chevrolet C3500HD and their top-rated products:

Spark Plugs
- Double Platinum Spark Plug: Enhances Durability & Reduces Misfires (18090039) – $7.29
- OE Fine Wire Double Iridium Spark Plug: High Performance & Longevity (10115443) – $11.99
- Laser Iridium Spark Plug (ITR4A15): Fine Wire Tip for High Efficiency (18090203) – $19.99
Ignition Coils and Boots
- Double Platinum Spark Plug: Enhances Durability & Reduces Misfires (18090039) – $7.29
- OE Fine Wire Double Iridium Spark Plug: High Performance & Longevity (10115443) – $11.99
- Laser Iridium Spark Plug (ITR4A15): Fine Wire Tip for High Efficiency (18090203) – $19.99

What types of Ignition and Tune-Up Products do you sell for my 2000 Chevrolet C3500HD?

As of 3/1/26, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2000 Chevrolet C3500HD:

Can I get help with 2000 Chevrolet C3500HD Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Ignition and Tune-Up Products and more.

What is your return policy for Chevrolet C3500HD Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Chevrolet C3500HD Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Chevrolet C3500HD Ignition and Tune-Up Products

Carquest Premium – Multi-Use Connector (Part No.PTA1163)

Carquest – Distributor Rotor (Part No.D220)

Carquest Premium – Distributor Ignition Pickup (Part No.MEA2261)

Felpro – Distributor Mounting Gasket (Part No.70194)

Autolite – Diesel Engine Glow Plug: High Intensity Concentrated Heat, Reliable Starts (Part No.1110)

Carquest Premium – New Ignition Modules (Part No.CBE1001)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 9 Leads (Part No.51077)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 8 Leads (Part No.51016)

Autolite – Platinum Spark Plug: Improved Performance & Durability (Part No.AP5245)

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP25)

Carquest Premium – Diesel Glow Plug Controller (Part No.GPC1004)

Carquest Premium – Diesel Glow Plug Controller (Part No.RAC1283)

Carquest – Distributor Cap (Part No.24E1002)

Carquest Premium – Distributor Cap (Part No.CAE1176)

GM Genuine Parts – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 9 Wire Set (Part No.718C)

ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 9 Wire Set (Part No.9618V)

Carquest Premium – Distributor T1830: 100% New, With Cap and Rotor (Part No.T1830)

Carquest Premium – Distributor T1878: 100% New, With Cap and Rotor (Part No.T1878)

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8159)

Carquest Premium – Spark Plug Wire Set (Part No.35-8109)

Carquest – Ignition Coil (Part No.26C1023)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1475)

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3686)

GM Genuine Parts – Ignition Knock (Detonation) Sensor (Part No.213-92)

GM Genuine Parts – Spark Plug Wire Support (Part No.12554085)

Carquest Premium – Ignition Switch (Part No.CSC1211)

Carquest Premium – Ignition Switch (Part No.CSA1066)

Carquest Premium – Ignition Switch (Part No.CSA1092)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8151)

GM Genuine Parts – Spark Plug Wire Support (Part No.12554085)

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-7100)

ACDelco – Ignition Coil (Part No.D577)

Delphi – Ignition Coil (Part No.CE20003)

Carquest – Ignition Coil (Part No.26C1023)

Carquest Premium – Ignition Coil (Part No.EBC1346)

NGK – Premium HEI Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48604)

Carquest Premium – Multi-Use Connector (Part No.PTA1122)

Carquest Premium – Multi-Use Connector (Part No.PTA1151)

GM Genuine Parts – Spark Plug Wire Kit (Part No.19417605)

Felpro – Distributor Mounting Gasket (Part No.70194)

GM Genuine Parts – Ignition Distributor Cap (Part No.D329A)

Carquest Premium – Distributor T1878: 100% New, With Cap and Rotor (Part No.T1878)

ACDelco – Ignition Distributor Rotor (Part No.D465)

Carquest Premium – Distributor Rotor (Part No.DAC1085)

Carquest – Distributor Cap (Part No.24E1002)

Carquest – Distributor Rotor (Part No.23A1001)

Carquest Premium – Distributor Cap (Part No.CAE1176)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1784)

NGK – Iridium IX Spark Plug (TR55IX): Outstanding Acceleration & Durability (Part No.7164)

Motorcraft – Double Platinum Spark Plug: Enhances Durability & Reduces Misfires (Part No.SP-486)

ACDelco – Double Platinum Spark Plug (Part No.41-979)

DENSO – U-Groove Spark Plug: OE Performance, T16EPR-U15 (Part No.5023)

NGK – Laser Iridium Spark Plug (ITR4A15): Fine Wire Tip for High Efficiency (Part No.5599)

Bosch – OE Fine Wire Double Iridium Spark Plug: High Performance & Longevity (Part No.9601)

NGK – V-Power Nickel Spark Plug (TR55): Enhanced Ignitability & Performance (Part No.3951)

NGK – G-Power Platinum Spark Plug (TR55GP): Enhanced Durability & Efficiency (Part No.3403)

ACDelco – Conventional Spark Plug (Part No.R44LTS6)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IT16TT (Part No.4713)

Autolite – Platinum Spark Plug (AP605): Enhanced Durability & Performance (Part No.AP605)

Autolite – Copper Resistor Spark Plug: Quick Starts & Reliable Performance (Part No.605)

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IT16 (Part No.5325)

ACDelco – RAPIDFIRE Spark Plug (Part No.14)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP605)

Champion – Copper Plus Spark Plug (RS14YC6): Dependable Performance & Durability (Part No.13)

DENSO – Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PT16EPR-L13 (Part No.5070)

Champion – Double Platinum Power Spark Plug (RS14PYPB5): Enhanced Ignitability & Durability (Part No.7940)

DENSO – Platinum TT Spark Plug – PT16TT (Part No.4511)

E3 – DiamondFIRE Automotive Spark Plug: More Power & Fuel Efficiency (Part No.E3.62)

ACDelco – Iridium Spark Plug (Part No.41-993)

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP605)

NGK – Ruthenium HX Spark Plug (TR5AHX): High Ignitability & Durability (Part No.94567)

Champion – Iridium Spark Plug (RS12WMPB4): Maximum Performance & Longevity (Part No.9405)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 9 Leads (Part No.51077)