2000 Cadillac Escalade Steering and Chassis Parts

Name: Remanufactured Power Steering Pump
Brand: Cardone
SKU: 20-8748
Price: 95.99 USD
Rating: 3.0 (1 reviews)

Below you will find various in-demand Cadillac Steering and Chassis Parts, components and accessories for your 2000 Escalade. Advance Auto Parts has popular Escalade parts like Power Steering Parts, Gear Boxes, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Escalade model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2000 Cadillac Escalade Steering and Chassis Parts below and start saving instantly.

Popular 2000 Cadillac Escalade Steering and Chassis Parts Categories

Sway Bars and Kits

Idler Arm Bracket Assemblies

Power Steering Coolers

Steering Gear Box

Steering Column Shift Mechanisms

Suspension Ball Joint Kits

Center Tie Rod Ends

Steering Drag Link Adjusting Sleeves

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Tie Rod End Sleeves

Torsion Bar Mounts

Center and Drag Links

Caster and Camber Kits

Front Alignment Kits

Axle Bumpers

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Power Steering Control Valve Bypass Tubes

Power Steering Pump Caps

Power Steering Pump Kits

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Pinion Bearings

Sway Bar Bushings

Worm Shaft Bearings

Pitman Shaft Seal Kits

Steering Gear Input Shaft Seals

Steering Gear Box Seals

Power Steering Pump Seal Kits

Chassis Wiring Harness Connectors

Idler Arm Repair Kits

Pump Shaft Seals

Essential Steering and Chassis Parts for 2000 Cadillac Escalades

from

$95.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$29.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.99

Power Steering Filter

from

$72.99

Remove the opportunity for another power steering control valve failure. This bypass valve eliminates failure-prone original equipment fluid valve.

Product Features:

Permanent repair – This bypass tube eliminates the failure-prone original equipment proportioning valve for predictable performance and reliability
Reliable fit – precision-engineered to match the original power steering pump
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – this design has undergone corrosion and on-vehicle fit testing

from

$34.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Power Steering Kit
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$36.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$124.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$90.99

Skyjacker(R) steering stabilizer, A steering stabilizer is a dampening shock for your steering system. It dampens out the harshness of the highway, the ‘shimmy’ from running the additional weight of larger tires and wheels and places control back into the driver hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive but worthy investment

Product Features:

Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
Stabilizer Dampens Out The Harshness Of The Highway, The ‘Shimmy’ From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
Reduce Physical Strength Handling Larger Tires

from

$38.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$84.99

This axle bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$332.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$26.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$38.99

Improves steering response
Reduces wander
Reduces vibration
Restores OE alignment

from

$121.99

This torsion bar mount is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$85.99

This suspension track bar is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment track bar on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$38.99

Improves vehicle handling
Restores OE alignment
Improves steering geometry
Easy camber adjustment

from

$67.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$16.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Natural rubber material with synthetic fabric lining
Split design allows for easier installation
Replacement can reduce front end noise
Restores like-new steering and handling
Bushings engineered for long life and dependability
Incorporates proven design and engineering features

from

$35.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$52.99

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing provides exceptional strength and durability
Oxidation film on the surface of the metal protects against corrosion
Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

from

$67.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$87.99

Heavy-duty design
Powdered metal gusher bearing design enables grease to flow through bearing to
Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
Exclusive cover plate protects against contaminants leaking into the bearing surface
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Loose or worn chassis parts can lead to premature tire wear

from

$47.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Zinc coated tubes protect against rust and corrosion
Heat/abrasion tubing protects vital areas

from

$241.99

The steering gear box is the heart of the vehicle’s steering system. It guides the wheel’s movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100 percent new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100 percent hydraulically tested to ensure perfect fit and function.

Product Features:

100 percent hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100 percent new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$132.99

Heavy-duty design
Loose or worn chassis parts can lead to premature tire wear
Engineered steel composition results in a stronger component
Powdered metal gusher bearing design enables grease to flow through bearing to
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$186.99

This steering column shift mechanism is designed to match the original components required to repair the steering column on specified vehicles, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this steering column shift mechanism is designed to match the original components required to repair the steering column on specified vehicles
Restores functionality – reliable replacement for an original mechanism that has failed due to wear or collision damage
Durable construction – this mechanism is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$199.99

Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

Upgrade your 2000 Cadillac Escalade with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Cadillac Escalade, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Escalade functioning at its best. At Advance Auto Parts, we offer a wide selection of 134 Steering and Chassis Parts for the 2000 Cadillac Escalade, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Gear Boxes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2000 Cadillac Escalade at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $3.29 to $637.99, with an average price of $82.04. Our 134 Steering and Chassis Parts in stock come from 17 trusted brands, so you’re sure to find the right part for your 2000 Cadillac Escalade without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Cadillac Escalade, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, Carquest Premium, DriveWorks, and more. Moog Steering and Chassis Parts start at just $37.99 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and DriveWorks also bring quality to the table, with Steering and Chassis Parts available starting at $18.49, and at an average 4.4 stars rating. With 969 customer reviews and counting, our 2000 Cadillac Escalade Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Cadillac Escalade is always ready to roll. We’re committed to providing you with everything you need to keep your Escalade in top shape, all in one place. Start shopping confidently below for your 2000 Cadillac Escalade!

Best-Selling Power Steering Parts for 2000 Cadillac Escalades

Enhance the driving experience in your Cadillac with 37 quality Power Steering Part components, starting at $3.29.

show more show less

from

$13.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$50.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$40.99

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$29.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.49

from

$43.99

from

$36.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$38.99

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$29.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$6.49

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$11.49

Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines

from

$112.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$75.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$95.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$270.99

Our power steering pumps are manufactured with premium components to ensure longevity and reliability under all driving conditions. Each unit is supplied with high temperature seals and load-tested to ensure reliable performance.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$3.29

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$36.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Medium-duty power steering oil cooler
Size: 3/4″ x 2-1/2″ x 12″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$58.99

from

$352.99

ACDelco GM Original Equipment Power Steering Pumps generate the hydraulic energy needed for your vehicle’s power-assisted steering system, and are GM-recommended replacements for your vehicle’s original components. These original equipment power steering pumps have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Generate energy need for your vehicle’s power-assisted steering system
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

Most Popular 2000 Cadillac Escalade Gear Boxes

Customize your Cadillac with 6 Gear Boxes products like Steering Gear Box, Steering Stabilizers, and Steering Gear Box Seals, all priced under $637.99.

show more show less

from

$202.99

100 percent hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100 percent new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$195.99

Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$65.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$637.99

New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested. All units are carefully packaged to insure safe arrival at your door.

from

$90.99

Skyjacker(R) steering stabilizer, A steering stabilizer is a dampening shock for your steering system. It dampens out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the driver hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive but worthy investment

Product Features:

Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
Stabilizer Dampens Out The Harshness Of The Highway, The Shimmy From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
Reduce Physical Strength Handling Larger Tires
No Hardware Included
Replacement Cylinder Only

from

$90.99

Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
Stabilizer Dampens Out The Harshness Of The Highway, The ‘Shimmy’ From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
Reduce Physical Strength Handling Larger Tires

Top Picks for 2000 Cadillac Escalade Ball Joints

Upgrade Cadillac Escalades with top-quality Ball Joints parts, including 24 OEM and aftermarket selections for your 2000 model.

show more show less

from

$112.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$52.99

Forged housing provides exceptional strength and durability
Oxidation film on the surface of the metal protects against corrosion
Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

from

$65.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$77.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$71.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$157.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$157.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$189.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$233.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$189.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$233.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$56.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Knurling improves retention between the control arm/knuckle and ball joint housing

from

$155.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$169.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$169.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$211.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$209.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$136.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$136.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$129.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$93.99

Ball Joint – Upper

from

$66.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$42.99

BALL JOINT

from

$31.99

Upper Ball Joint

In-Demand Sway Bars for 2000 Cadillac Escalades

Select from 26 premium Sway Bars parts for your 2000 Cadillac Escalade, with prices ranging from $8.29 to $227.99.

show more show less

from

$53.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$13.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$22.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$18.49

Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
Wrench flats at the base of the stud allow for the use of sockets for easy installation

from

$32.99

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$18.49

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$29.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$27.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$30.99

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$32.99

Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

from

$21.79

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$8.29

Strut Rod Bushing

from

$227.99

The symptoms of a failed suspension stabilizer bar assembly, also known as a sway bar, can include suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding. The causes for failure can range from worn bushings and links to collision impact. The sway bar and components in this assembly are designed to match the performance of the original equipment parts on specified vehicle makes, models and years. The assembly has been engineered and manufactured to strict quality control standards for a complete sway bar repair and reliable service life.

Product Features:

Direct replacement – the components in this suspension sway bar assembly are designed to match the performance of the factory assembly on specified vehicles to help ensure predictable vehicle handling
Ideal solution – engineered to help ensure proper vehicle handling and eliminate suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding
Durable construction – designed and manufactured to strict specifications for reliable performance, and to replace a sway bar that has failed due to collision or worn bushings or links
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$51.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$30.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$28.49

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$75.99

Sway Bar Link

from

$25.49

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$25.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$82.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$49.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$39.99

This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$38.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$31.99

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

Most Sold 2000 Cadillac Escalade Tie Rods

Explore our best-selling Cadillac parts for the 2000 Escalade among 10 OEM and aftermarket options starting from $18.99.

show more show less

from

$37.99

Coated for corrosion resistance
Engineered to meet or exceed OE Performance
Wrench flats on housing and stud provide easy installation and alignment adjustment.
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$35.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$31.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$51.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$37.49

Product Features:

ABSORBS IMPACT – Belleville preload washer helps eliminate spring bind and shattering during shock load
PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates

from

$18.99

Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$27.99

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Hardware included for easier installation (where applicable)

from

$52.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$39.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs & wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Thread locking compound included.

from

$38.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Top-Rated Steering and Chassis Parts Brands For Your 2000 Cadillac Escalade

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2000 Cadillac Escalades. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Carquest Premium, and DriveWorks, and more. Steering and Chassis Parts from these brands that fit a 2000 Escalade start at just $18.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2000 Cadillac Escalade Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Cadillac Escalade, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2000 Cadillac Escalade. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $37.99, with an average price of just $77.99. Plus, with over 32 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $107.99

(14)

Steering Idler Arm

“Excellent quality product and the price was right. I ordered online, used speed perks and a 20% off promo code. I had to drive right at 20 miles to p”

from $37.99

(10)

Steering Tie Rod End Adjusting Sleeve

“It’s a tie rod adjusting sleeve….what more is there to say? It is built really well though, and not flimsy or junky looking. I got this for a 1994 C”

from $87.99

(8)

Steering Idler Arm Bracket

“Works per”

Popular Carquest Premium 2000 Cadillac Escalade Steering and Chassis Parts

Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2000 Cadillac Escalade owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2000 Escalade, Advance Auto Parts carries a full inventory of 3 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $29.49 to $43.99, plus, with more than 65 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $40.99

(2)

Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring

“The part fit right the first time!!!”

from $43.99

(7)

Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose

“fit like a glove”

from $29.49

(56)

Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring

“Fit perfectly & works great.”

FAQs for 2000 Cadillac Escalade Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2000 Cadillac Escalades?

Out of 134 Steering and Chassis Parts that fit 2000 Cadillac Escalades, the following parts are the top sellers:

Transmission Oil Cooler Hose (5670022) – $32.49
Mounting Kit System (6014844) – $11.99
Suspension Stabilizer Bar Link Kit (10575128) – $32.99

What’s the price range for 2000 Cadillac Escalade Steering and Chassis Parts?

Steering and Chassis Part prices for the 2000 Cadillac Escalade start at $3.29 and go up to $637.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2000 Cadillac Escalade?

The average price for Steering and Chassis Parts for the 2000 Cadillac Escalade is $82.04. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Cadillac Escalade model years?

Yes, we currently carry Steering and Chassis Parts for 25 model years of Cadillac Escalades between 1999 and 2026. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 2000 Cadillac Escalade?

The cheapest 2000 Cadillac Escalade Steering and Chassis Parts we carry in stock are:

3/8" ID Return Hose (sold by each) (18070570) – $3.29
Power Steering Caps (6090435) – $6.49
Power Steering Filter (50167394) – $7.99
Strut Rod Bushing (10640955) – $8.29
Quick Connect Coupler (15230008) – $11.49

What are the top-rated Steering and Chassis Parts that fit the 2000 Cadillac Escalade?

Out of 969 reviews by customers, our 2000 Cadillac Escalade Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2000 Cadillac Escalade and their top-rated products:

Tie Rods
- Steering Tie Rod End Adjusting Sleeve (20515467) – $37.99
- Steering Tie Rod End (20973554) – $37.49
- Steering Tie Rod End (20973552) – $51.99

What types of Steering and Chassis Parts do you sell for my 2000 Cadillac Escalade?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2000 Cadillac Escalade:

Can I get help with 2000 Cadillac Escalade Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Steering and Chassis Parts and more.

What is your return policy for Cadillac Escalade Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Cadillac Escalade Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Cadillac Escalade Steering and Chassis Parts

Cardone – Remanufactured Power Steering Pump (Part No.20-8748)

Dorman – Power Steering Pump Pulley (Part No.300-200)

BBB Industries – Power Steering Filter (Part No.991-FLT3)

Dorman – Variable Steering Solenoid Bypass Tube (Part No.926-049)

National – Multi-Purpose Seal (Part No.PSK-1)

Powercraft – Pump Seal Kit (Part No.7918)

Rare Parts – Tie Rod End (Part No.RP29394)

Skyjacker – Repl Stab: Silver W/Bk Boot (Part No.9500)

Rare Parts – Sway Bar Bushing (Part No.RP17527)

Dorman – Position Frame Bumper (Part No.523-256)

Dorman – Steering Shaft Double Cardan Joint (Part No.425-184)

National – Multi-Purpose Bearing (Part No.100-CC4)

FAG US – Cup (Part No.M802011)

Rare Parts – Pitman Arm (Part No.RP20736)

Dorman – Suspension Torsion Bar Mount (Part No.905-507)

Dorman – Suspension Control Arm (Part No.524-621)

Rare Parts – Cam Bolt Kit (Part No.RP16528)

Powercraft – Steering Gear Major Seal Kit (Part No.8774)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K202000)

Driveworks – Steering Tie Rod End (Part No.DW-ES2836RL)

Driveworks – Ball Joint (Part No.DW-K6292)

MOOG – Suspension Ball Joint (Part No.K500007)

MOOG – Steering Idler Arm Bracket (Part No.K6722)

Carquest Premium – Power Steering Return Hose Assembly, Bulk – 3/8" I.D. Return Hose (CPE) – with Stone Guard (Part No.40138)

Cardone – Remanufactured Steering Gear (Part No.27-8413)

MOOG – Steering Idler Arm (Part No.K6534)

Dorman – Steering Column Shift Mechanism (Part No.905-101)

Carquest Premium – Upper Control Arm with Ball Joint (Part No.810-258825B)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Cardone – Power Steering Filter (Part No.20-0058F)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36546)

Cardone – Power Steering Filter (Part No.20-0012F)

Imperial – Mounting Kit System (Part No.226201)

Dorman – Power Steering Pump Pulley (Part No.300-200)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36126)

Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.39885)

Powercraft – Pump Seal Kit (Part No.7918)

Carquest Premium – 3/8" I.D. Return Hose CPE (Part No.36219)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Powercraft – Pump Complete Rebuild Kit (Part No.7910)

Dorman – Help – Power Steering Caps (Part No.82581)

Imperial – Quick Connect Coupler (Part No.240250)

Cardone – Remanufactured Power Steering Pump (Part No.20-8748VB)

Cardone – Remanufactured Power Steering Pump (Part No.20-860)

Cardone – Remanufactured Power Steering Pump (Part No.20-8748)

Carquest Premium – New Power Steering Pump (Part No.98-8748CQ)

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

Cardone – Power Steering Filter (Part No.20-P038F)

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Carquest Premium – Power Steering Return Hose Assembly, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.36864)

ACDelco – Power Steering Pump (Part No.15909826)

Cardone – Remanufactured Steering Gear (Part No.27-7540)

Lares – Remanufactured Power Steering Gear Box (Part No.1417)

Powercraft – Steering Gear Major Seal Kit (Part No.8775)

Lares – New Power Steering Gear Box (Part No.11417)

Skyjacker – Heavy Duty Oem, Single, White With Red Boot, Without Brackets/ Without Hardware (Part No.7500)

Skyjacker – Repl Stab: Silver W/Bk Boot (Part No.9500)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620719)

Driveworks – Ball Joint (Part No.DW-K6292)

MOOG – Suspension Ball Joint (Part No.K6292)

MOOG – Suspension Ball Joint (Part No.K6477)

MOOG – Suspension Ball Joint (Part No.K6509)

Carquest Premium – Suspension Control Arm And Ball Joint Assembly (Part No.810-94965B)

Carquest Premium – Suspension Control Arm And Ball Joint Assembly (Part No.810-94966B)

Carquest Premium – Suspension Control Arm and Ball Joint Assembly (Part No.810-94947B)

Carquest Premium – Suspension Control Arm and Ball Joint Assembly (Part No.810-95141B)

Carquest Premium – Suspension Control Arm and Ball Joint Assembly (Part No.810-94948B)

Carquest Premium – Suspension Control Arm and Ball Joint Assembly (Part No.810-95140B)

Carquest Premium – Ball Joint (Part No.410-65424)

Dorman – Suspension Control Arm (Part No.521-914)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP12250)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP12249)

Dorman – Suspension Control Arm (Part No.522-178)

Dorman – Suspension Control Arm (Part No.522-177)

Dorman – Suspension Control Arm (Part No.520-129)

Dorman – Suspension Control Arm (Part No.520-130)

Dorman – Suspension Control Arm (Part No.521-913)

Rare Parts – Ball Joint – Upper (Part No.RP10752)