2000 BMW 540i Exhaust Parts

Essential Exhaust Parts for 2000 BMW 540is

Victor Reinz – Exhaust Manifold Gasket Set (Part No.15-31834-01)

Exhaust Manifold Gasket Set

from

$44.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds OE specifications
See More

Elring – Exhaust Manifold Gas (Part No.A8111167112ELR)

Exhaust Manifold Gas

from

$10.87
Exhaust Manifold Gas

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97274)

Exhaust Manifold Gasket Set

from

$48.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Febi – Muffler Bracket (Part No.H8002168462FEB)

Muffler Bracket

from

$8.53
Muffler Bracket

Vaico – Muffler Hanger (Part No.H8052168475VCO)

Muffler Hanger

from

$21.46
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50451)

HM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1050.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50451. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1999-2003 BMW 540i, 1999-2001 BMW 740iL, and more, this direct-fit catalytic converter also interchanges with OE part 11 62 1 437 495. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Rein – Exhaust Clamp (Part No.H8020331885RIN)

Exhaust Clamp

from

$28.87
Exhaust Clamp

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49785)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$1041.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49785. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1999-2003 BMW 540i, 1999-2001 BMW 740iL, and more, this direct-fit catalytic converter also interchanges with OE part 18 30 1 437 545. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.457035)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$809.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 457035. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1999-2000 BMW 540i and interchanges with OE part 18 30 1 437 545. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.4481683)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$1445.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4481683. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1996-1998 BMW 740iL and 1997-1998 BMW 540i, this direct-fit catalytic converter also interchanges with OE parts 18 30 7 505 322 and 18 30 1 437 354, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Ultra EPA Universal Catalytic Converter 2" Inlet (ID) 2" Outlet (ID) (Part No.93236)

Ultra EPA Universal Catalytic Converter 2" Inlet (ID) 2" Outlet (ID)

from

$172.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker Ultra Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Dorman – Exhaust Pipe Clamp (Part No.904-098)

Exhaust Pipe Clamp

from

$63.99
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.

Product Features:
  • Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles.
  • Ideal solution – engineered to help ensure secure connections between exhaust system components.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Newco – Nut (Part No.4D10011131NEW)

Nut

from

$1.36
Nut

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

Upgrade your 2000 BMW 540i with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2000 BMW 540i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Exhaust Parts are key to keeping your 540i functioning at its best. At Advance Auto Parts, we offer a wide selection of 17 Exhaust Parts for the 2000 BMW 540i, designed to meet your needs without breaking the bank. From Exhaust Fitting replacements to Exhaust Manifold and Headers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2000 BMW 540i at great prices. Our Exhaust Parts inventory for this model ranges from just $1.36 to $1,152.99, with an average price of $373.52. Our 17 Exhaust Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 2000 BMW 540i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 BMW 540i, we stock popular OEM and aftermarket Exhaust Parts from top names like Flowtech, and more. Flowtech Exhaust Parts start at just $85.99 and boast an impressive 4 stars average rating from customers. With 5 customer reviews and counting, our 2000 BMW 540i Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 BMW 540i is always ready to roll. We’re committed to providing you with everything you need to keep your 540i in top shape, all in one place. Start shopping confidently below for your 2000 BMW 540i!

Best-Selling Exhaust Fittings for 2000 BMW 540is

Enhance the driving experience in your BMW with 2 quality Exhaust Fitting components, starting at $49.42.

Dorman – Exhaust Pipe Clamp (Part No.904-098)

Exhaust Pipe Clamp

from

$63.99
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.

Product Features:
  • Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles.
  • Ideal solution – engineered to help ensure secure connections between exhaust system components.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

HJS – Exhaust Clamp (Part No.H8020453829HJS)

Exhaust Clamp

from

$49.42
Exhaust Clamp

Most Popular 2000 BMW 540i Exhaust Manifold and Headers

Customize your BMW with 1 Exhaust Manifold and Headers products like Exhaust Manifold and Headers, all priced under $1,050.99.

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50451)

HM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1050.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50451. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1999-2003 BMW 540i, 1999-2001 BMW 740iL, and more, this direct-fit catalytic converter also interchanges with OE part 11 62 1 437 495. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Top Picks for 2000 BMW 540i Exhaust Gaskets

Upgrade BMW 540is with top-quality Exhaust Gaskets parts, including 3 OEM and aftermarket selections for your 2000 model.

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97274)

Exhaust Manifold Gasket Set

from

$48.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Victor Reinz – Exhaust Manifold Gasket Set (Part No.15-31834-01)

Exhaust Manifold Gasket Set

from

$44.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds OE specifications
See More

Elring – Exhaust Manifold Gas (Part No.A8111167112ELR)

Exhaust Manifold Gas

from

$10.87
Exhaust Manifold Gas

In-Demand Catalytic Converters for 2000 BMW 540is

Select from 7 premium Catalytic Converters parts for your 2000 BMW 540i, with prices ranging from $21.45 to $1,152.99.

Rein – Exhaust Clamp (Part No.H8020331885RIN)

Exhaust Clamp

from

$28.87
Exhaust Clamp

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49783)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1152.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49783. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1999-2003 BMW 540i, 1999-2001 BMW 740iL, and more, this direct-fit catalytic converter also interchanges with OE part 11 62 1 437 496. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50450)

HM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1097.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50450. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1999-2003 BMW 540i, 1999-2001 BMW 740iL, and more, this direct-fit catalytic converter also interchanges with OE part 11 62 1 437 496. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49785)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$1041.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49785. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1999-2003 BMW 540i, 1999-2001 BMW 740iL, and more, this direct-fit catalytic converter also interchanges with OE part 18 30 1 437 545. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.457035)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$809.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 457035. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1999-2000 BMW 540i and interchanges with OE part 18 30 1 437 545. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.457036)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$809.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 457036. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1999-2000 BMW 540i and interchanges with OE part 18 30 1 437 546. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

HJS – Exhaust Seal Ring (Part No.H4002100008HJS)

Exhaust Seal Ring

from

$21.45
Exhaust Seal Ring

Most Sold 2000 BMW 540i Exhaust Hangers

Explore our best-selling BMW parts for the 2000 540i among 2 OEM and aftermarket options starting from $8.53.

Febi – Muffler Bracket (Part No.H8002168462FEB)

Muffler Bracket

from

$8.53
Muffler Bracket

Vaico – Muffler Hanger (Part No.H8052168475VCO)

Muffler Hanger

from

$21.46
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More

Top-Rated Exhaust Parts Brands For Your 2000 BMW 540i

Shop for the best-rated brands offering Exhaust Parts and other products for your 2000 BMW 540is. Below you’ll find some of our best rated Exhaust Parts from Flowtech, and more. Exhaust Parts from these brands that fit a 2000 540i start at just $85.99 and are rated as high as 4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Flowtech 2000 BMW 540i Exhaust Parts

When it comes to maintaining or upgrading your 2000 BMW 540i, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Flowtech ticks all of those boxes. We offer a wide selection of Flowtech Exhaust Parts, specifically designed for the 2000 BMW 540i. With over 1 Flowtech brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $85.99. Plus, with over 5 customer reviews and an average rating of 4 stars, you can trust that our Flowtech Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Terminator; Exhaust Tips
from
$85.99

(5)

Terminator; Exhaust Tips

“very nice…worth the money.”

FAQs for 2000 BMW 540i Exhaust Parts

Which Exhaust Parts are best-sellers for 2000 BMW 540is?

Out of 17 Exhaust Parts that fit 2000 BMW 540is, the following parts are the top sellers:

What’s the price range for 2000 BMW 540i Exhaust Parts?

Exhaust Part prices for the 2000 BMW 540i start at $1.36 and go up to $1,152.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2000 BMW 540i?

The average price for Exhaust Parts for the 2000 BMW 540i is $373.52. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other BMW 540i model years?

Yes, we currently carry Exhaust Parts for 8 model years of BMW 540is between 1994 and 2003. Exhaust Parts are bought most frequently for the following model years: 2003, 2002, 2001, 1999, 1998, 1997, 1995, and 1994.

What are the cheapest Exhaust Parts for my 2000 BMW 540i?

The cheapest 2000 BMW 540i Exhaust Parts we carry in stock are:

What are the top-rated Exhaust Parts that fit the 2000 BMW 540i?

Out of 5 reviews by customers, our 2000 BMW 540i Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2000 BMW 540i and their top-rated products:

What types of Exhaust Parts do you sell for my 2000 BMW 540i?

As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2000 BMW 540i:

Can I get help with 2000 BMW 540i Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Exhaust Parts and more.

What is your return policy for BMW 540i Exhaust Parts?

Advance Auto Parts keeps returns simple. For new BMW 540i Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.