2000 BMW 528i Suspension Parts

Below you will find various in-demand BMW Suspension Parts, components and accessories for your 2000 528i. Advance Auto Parts has popular 528i parts like Coil and Leaf Springs, Shocks and Struts, Control Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other 528i model years including 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 and more. Select a category of 2000 BMW 528i Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2000 BMW 528i Suspension Parts Categories

Suspension Air Compressors

Suspension Strut and Coil Spring Assemblies

Rear Shock and Struts

Front Shock and Struts

Front and Rear Shock or Strut Kits

Suspension Strut Bumper and Bellows Kits

Lower Control Arms

Suspension Air Springs

Air Suspension Helper Springs

Shock Boots, Levelers, and Accessories

Air Suspensions

Lower Control Arm Bushings

Strut Mounts

Suspension Knuckle Bushings

Suspension Air Bag and Bellows

Shock Absorber Kits

Stability Control Steering Angle Sensors

Essential Suspension Parts for 2000 BMW 528is

from

$119.99

Complete Strut Assem

from

$99.99

SuspAirBag/Bellows

from

$94.99

Air Bag

from

$975.99

Arnott has teamed up directly with WABCO to supply you with the same OE part at a fraction of the dealer cost. These compressors are made by the same supplier used by BMW. Arnott now has the one-stop solution for those who prefer the original equipment. This same compressor assembly will cost you more than you care to pay at your local BMW dealership! This is just the compressor and dryer assembly. You will have to reuse your intake lines, mounting brackets, and plug. This new compressor comes with detailed instructions. This compressor is ONLY for vehicles equipped with rear only air suspension.

Product Features:

Exclusively for 00-06 BMW X5 (E53), 99-03 BMW 5-Series (E39), 02-08 BMW 7-Series (E65,E66)
Wabco Unit Same As OE
Reuse Intake Lines
Reuse Mounting Brackets And Plug
Includes Detailed Instructions

from

$29.99

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$59.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance
All bearings included are produced by an Original Equipment manufacturer ensuring the highest quality and performance

from

$269.99

Quick Strut Kit

from

$239.99

Quick Strut Kit

from

$240.66

Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Product Features:

Constant damping characteristics under any load
Consistent performance and handling give the vehicle a new car feel every time
Proven BILSTEIN gas pressure technology
High OEM quality standards

from

$182.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$569.99

SuspUpKt

from

$129.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

Guaranteed Fitment
Ideal direct-fit replacement for faulty OE steering angle sensor
Quality materials resist wear and provide accurate steering angle signal
Designed for reliability and long service life

from

$1518.99

As part of the Vehicle Stability System multiple sensor inputs are required for the processor to perform the brake control operation to maintain vehicle skid control and vehicle stability control. The Power Steering Speed Sensor provides the processor the needed steering position and rotational speed input required for proper braking operation.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$169.99

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$94.99

Air Bag

from

$63.99

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$31.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$162.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$162.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$329.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
OE replacement
Reduces vibration
Reduces tire wear

from

$159.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$37.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$36.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$66.99

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$209.99

Air Spring Kit

Upgrade your 2000 BMW 528i with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2000 BMW 528i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Suspension Parts are key to keeping your 528i functioning at its best. At Advance Auto Parts, we offer a wide selection of 36 Suspension Parts for the 2000 BMW 528i, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Shocks and Struts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2000 BMW 528i at great prices. Our Suspension Parts inventory for this model ranges from just $16.99 to $975.99, with an average price of $177.42. Our 36 Suspension Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2000 BMW 528i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 BMW 528i, we stock popular OEM and aftermarket Suspension Parts from top names like Monroe, and more. Monroe Suspension Parts start at just $86.99 and boast an impressive 4.4 stars average rating from customers. With 13 customer reviews and counting, our 2000 BMW 528i Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 BMW 528i is always ready to roll. We’re committed to providing you with everything you need to keep your 528i in top shape, all in one place. Start shopping confidently below for your 2000 BMW 528i!

Best-Selling Coil and Leaf Springs for 2000 BMW 528is

Enhance the driving experience in your BMW with 3 quality Coil and Leaf Spring components, starting at $119.99.

show more show less

from

$139.99

Complete Strut Assem

from

$119.99

Complete Strut Assem

from

$192.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

Most Popular 2000 BMW 528i Shocks and Struts

Customize your BMW with 10 Shocks and Struts products like Rear Shock and Struts, Front Shock and Struts, and Strut Mounts, all priced under $182.99.

show more show less

from

$86.99

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$36.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$37.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$26.49

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$182.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$159.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Strut
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Bow 5 Series
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Made In Use
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5260
Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb110

from

$149.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$119.99

Prevents tire noise and vibration

from

$119.99

Prevents tire noise and vibration

from

$16.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, they’re covered by an unlimited mileage, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

Guaranteed fitment
Replacement of worn strut mount eliminates clunk during braking and bumps
Restores proper strut position and reduces steering wheel vibration
High-strength elastomer (where applicable) and alloy metal construction for maximum durability
Manufactured to OE strut mount dimensions and geometry for correct wheel alignment
Precision bearings or bushings for low-friction steering knuckle rotation

Top Picks for 2000 BMW 528i Control Arms

Upgrade BMW 528is with top-quality Control Arms parts, including 6 OEM and aftermarket selections for your 2000 model.

show more show less

from

$62.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$329.99

Restores vehicle handling
OE replacement
Reduces vibration
Reduces tire wear

from

$289.99

Restores vehicle handling
OE replacement
Reduces vibration
Reduces tire wear

from

$257.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$199.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$81.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

In-Demand Suspension Hardware for 2000 BMW 528is

Select from 1 premium Suspension Hardware parts for your 2000 BMW 528i.

show more show less

from

$66.99

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Most Sold 2000 BMW 528i Air Suspension and Kits

Explore our best-selling BMW parts for the 2000 528i among 15 OEM and aftermarket options starting from $29.99.

show more show less

from

$29.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$269.99

Quick Strut Kit

from

$189.99

SuspAirBag/Bellows

from

$975.99

Exclusively for 00-06 BMW X5 (E53), 99-03 BMW 5-Series (E39), 02-08 BMW 7-Series (E65,E66)
Wabco Unit Same As OE
Reuse Intake Lines
Reuse Mounting Brackets And Plug
Includes Detailed Instructions

from

$569.99

SuspUpKt

from

$239.99

Quick Strut Kit

from

$209.99

Air Spring Kit

from

$187.99

Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Product Features:

Exclusively for BMW 5-series Wagons (E39) w/rear Leveling
Multi-ply Continental ContiTech air sleeve
Heavy-duty crimping rings
Custom-designed, high-impact resin bottom piston with a brass insert
Constructed to meet or exceed industry’s standards for quality, reliability and function
Replace in pairs

from

$187.99

Exclusively for BMW 5-series Wagons (E39) w/rear Leveling
Multi-ply Continental ContiTech air sleeve
Heavy-duty crimping rings
Custom-designed, high-impact resin bottom piston with a brass insert
Constructed to meet or exceed industry’s standards for quality, reliability and function
Replace in pairs

from

$169.99

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$163.99

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$94.99

Air Bag

from

$94.99

SuspAirBag/Bellows

from

$94.99

SuspAirBag/Bellows

from

$94.99

Air Bag

Top-Rated Suspension Parts Brands For Your 2000 BMW 528i

Shop for the best-rated brands offering Suspension Parts and other products for your 2000 BMW 528is. Below you’ll find some of our best rated Suspension Parts from Monroe, and more. Suspension Parts from these brands that fit a 2000 528i start at just $86.99 and are rated as high as 4.4 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Monroe 2000 BMW 528i Suspension Parts

When it comes to maintaining or upgrading your 2000 BMW 528i, using quality Suspension Parts is essential to ensure durability and a perfect fit. Monroe ticks all of those boxes. We offer a wide selection of Monroe Suspension Parts, specifically designed for the 2000 BMW 528i. With over 1 Monroe brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $86.99. Plus, with over 1 customer reviews and an average rating of 4.4 stars, you can trust that our Monroe Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $86.99

(1)

Strut-Mate Suspension Strut Mount

“I ordered these bearing plates because the Monroe name used to mean something. I had to have the store re-order another pair because my original pair ”

FAQs for 2000 BMW 528i Suspension Parts

Which Suspension Parts are best-sellers for 2000 BMW 528is?

Out of 36 Suspension Parts that fit 2000 BMW 528is, the following parts are the top sellers:

Jounce Bumper and Bellows (19170670) – $37.99
Strut-Mate Front Suspension Strut Bumper and Bellows Kit (99985248) – $29.99
Complete Strut Assem (11880196) – $139.99

What’s the price range for 2000 BMW 528i Suspension Parts?

Suspension Part prices for the 2000 BMW 528i start at $16.99 and go up to $975.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2000 BMW 528i?

The average price for Suspension Parts for the 2000 BMW 528i is $177.42. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other BMW 528i model years?

Yes, we currently carry Suspension Parts for 11 model years of BMW 528is between 1997 and 2016. Suspension Parts are bought most frequently for the following model years: 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, and 2008.

What are the cheapest Suspension Parts for my 2000 BMW 528i?

The cheapest 2000 BMW 528i Suspension Parts we carry in stock are:

Strut Mount, Front (50184717) – $16.99
Jounce Bumper and Bellows (19171748) – $26.49
Strut-Mate Front Suspension Strut Bumper and Bellows Kit (99985248) – $29.99
Strut Bellows (20518181) – $36.99
Jounce Bumper and Bellows (19170670) – $37.99

What are the top-rated Suspension Parts that fit the 2000 BMW 528i?

Out of 13 reviews by customers, our 2000 BMW 528i Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2000 BMW 528i and their top-rated products:

Shocks and Struts
- Strut-Mate Suspension Strut Mount (18570207) – $86.99
- Strut Bellows (20518181) – $36.99

What types of Suspension Parts do you sell for my 2000 BMW 528i?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 2000 BMW 528i:

Can I get help with 2000 BMW 528i Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Suspension Parts and more.

What is your return policy for BMW 528i Suspension Parts?

Advance Auto Parts keeps returns simple. For new BMW 528i Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 BMW 528i Suspension Parts

Suncore – Complete Strut Assem (Part No.55S15950)

Suncore – SuspAirBag/Bellows (Part No.256BW-15-R)

Suncore – Air Bag (Part No.254BW-15-RR)

Arnott Air Suspension – Air Suspension Compressor – WABCO (Part No.P-2469)

Monroe – Strut-Mate Front Suspension Strut Bumper and Bellows Kit (Part No.63638)

Rein – Strut Mount (Part No.AVQ0372R)

Suncore – Quick Strut Kit (Part No.2-55S11390-001)

Suncore – Quick Strut Kit (Part No.2-55S15950-001)

Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000457381BIL)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920220)

Suncore – SuspUpKt (Part No.255BW-15-R-KIT)

URO Parts – STEER ANGLE SENSOR (Part No.32306793632)

Carquest Premium – Steering Angle Sensor (Part No.SBG4391)

Dorman – Air Suspension Air Spring (Part No.949-959)

Suncore – Air Bag (Part No.254BW-15-RL)

MOOG – Suspension Control Arm Bushing (Part No.K201367)

Dorman – Suspension Control Arm Bushing (Part No.533-645)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920267)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920268)

Rare Parts – Control Arm (Part No.RP12487)

Dorman – Suspension Control Arm (Part No.528-121)

KYB – Jounce Bumper and Bellows (Part No.SB108)

MOOG – Strut Bellows (Part No.K90460)

Dorman – Suspension Knuckle Bushing (Part No.905-533)

Suncore – Air Spring Kit (Part No.254BW-15-R-PAIR)

Suncore – Complete Strut Assem (Part No.55S11390)

Suncore – Complete Strut Assem (Part No.55S15950)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920219)

Monroe – Strut-Mate Suspension Strut Mount (Part No.903918)

MOOG – Strut Bellows (Part No.K90460)

KYB – Jounce Bumper and Bellows (Part No.SB108)

KYB – Jounce Bumper and Bellows (Part No.SB110)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920220)

KYB – Gas Strut (Part No.334674)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920117)

Rare Parts – Strut Mount (Part No.RP17722)

Rare Parts – Strut Mount (Part No.RP18897)

URO Parts – Strut Mount, Front (Part No.31331094616)

MOOG – Control Arm Bushing (Part No.K200012)

Rare Parts – Control Arm (Part No.RP12487)

Rare Parts – Control Arm (Part No.RP12488)

Dorman – Suspension Control Arm (Part No.521-398)

Rare Parts – Control Arm Bushing (Part No.RP19349)

Rare Parts – Control Arm Bushing (Part No.RP19637)

Dorman – Suspension Knuckle Bushing (Part No.905-533)

Monroe – Strut-Mate Front Suspension Strut Bumper and Bellows Kit (Part No.63638)

Suncore – Quick Strut Kit (Part No.2-55S11390-001)

Suncore – SuspAirBag/Bellows (Part No.255BW-15-R-PAIR)

Arnott Air Suspension – Air Suspension Compressor – WABCO (Part No.P-2469)

Suncore – SuspUpKt (Part No.255BW-15-R-KIT)

Suncore – Quick Strut Kit (Part No.2-55S15950-001)

Suncore – Air Spring Kit (Part No.254BW-15-R-PAIR)

Arnott Air Suspension – Air Spring (Part No.A-2738)

Arnott Air Suspension – Air Spring (Part No.A-2737)

Dorman – Air Suspension Air Spring (Part No.949-959)

Dorman – Air Suspension Air Spring (Part No.949-960)

Suncore – Air Bag (Part No.254BW-15-RL)

Suncore – SuspAirBag/Bellows (Part No.255BW-15-RL)

Suncore – SuspAirBag/Bellows (Part No.255BW-15-RR)

Suncore – Air Bag (Part No.254BW-15-RR)