1999 Volkswagen Jetta Engine Parts

Name: Remanufactured Turbocharger
Brand: Rotomaster
SKU: K8170101R
Price: 699.99 USD

Below you will find various in-demand Volkswagen Engine Parts, components and accessories for your 1999 Jetta. Advance Auto Parts has popular Jetta parts like Engine Mounts, Engine Timing Parts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Jetta model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1999 Volkswagen Jetta Engine Parts below and start saving instantly.

Popular 1999 Volkswagen Jetta Engine Parts Categories

Valve Covers

Engine Timing Belt Kit With Water Pumps

Engine Valve Lifters

Engine Oil Temperature Senders

Valve Cover Gaskets

Turbochargers and Parts

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Plenum Gasket Sets

Crankshaft Position Sensors

Harmonic Balancers

Timing Belt Tensioner Springs

Cylinder Head Gasket Sets

Engine Oil Cooler Accessories

Engine Oil Dip Stick Tubes

Cylinder Head Gaskets

Oil Level Sensors

Crankshaft Seals

Turbocharger Oil Lines

Timing Belts

Timing Belt Tensioners

Engine Crank Angle Sensors

Oil Caps

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Turbo Pressure Sensors

Timing Chain Tensioners

Engine Computers

Rubber Freeze Plugs

Intercooler Connection Hoses

Timing Cover Seals

Engine Valve Stem Seals

Engine Oil Separators

Oversized Main Bearings

Standard Rod Bearing Sets

Standard Piston Rings

Lower Gasket Sets

Engine Oil Level Sensor Cover Kits

Engine Control Module Relays

Camshaft Seals

Engine Oil Dipstick Tube Funnels

Engine Oil Pan Kits

Engine Oil Pump Chain Sets

Expansion Plugs

Camshaft Followers

Balance Shaft Belt Tensioners

Oil Pump Seals

Turbocharger Service Kits

Turbocharger Cartridges

Engine Assembly Lube

Engine Oil Pump Primers

Engine Oil Pump Sleeve

Essential Engine Parts for 1999 Volkswagen Jettas

from

$699.99

Rotomaster remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$134.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Face of top rings coated with latest generation Plasma-Moly
Decreases friction
Very resistant to scuffing
Exacting tolerances
Meets or exceeds OEM specifications

from

$12.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.79

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$108.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$114.99

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.99

This engine oil dipstick tube is designed to match the fit and function of the original tube on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine oil dipstick tube is designed to match the fit and function of the original tube on specified vehicles
Restores functionality – reliable replacement for an original part that is missing, bent or broken
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$85.99

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$41.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$23.99

This engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original part that is missing or cracked due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$66.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$57.99

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
Every part for the repair procedure is included in the kit unless otherwise noted

from

$54.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Meet or exceed OEM performance requirements. Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience.

Product Features:

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$159.99

Rein Automotive OE quality oil pan kits are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil pans are designed to tight tolerances to ensure proper sealing. Kits include OE quality gaskets or Ajusil silicone sealant where the OE pans do not use a gasket. Kits include new drain plugs.

Product Features:

Includes OE quality gaskets or Ajusil silicone sealant.
Includes new drain plugs.
Designed to tight tolerances to ensure proper sealing.

from

$10.29

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$39.99

ENG OIL PMP CHAIN ST

from

$20.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$337.99

The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$119.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$28.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
Teflon coated profile round tooth belt designed for specific high performance, high temperature engines

from

$128.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Road tested to ensure real world performance and to verify that each design meets our high standards for quality
Coating salt spray tested for over 200 hours to insure durability

from

$185.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
Durable construction – stringent specifications and careful construction help ensure longevity
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$384.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$9.49

Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.

Product Features:

Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$36.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Upgrade your 1999 Volkswagen Jetta with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1999 Volkswagen Jetta, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Engine Parts are key to keeping your Jetta functioning at its best. At Advance Auto Parts, we offer a wide selection of 147 Engine Parts for the 1999 Volkswagen Jetta, designed to meet your needs without breaking the bank. From Engine Mount replacements to Engine Timing Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1999 Volkswagen Jetta at great prices. Our Engine Parts inventory for this model ranges from just $1.79 to $938.99, with an average price of $66.22. Our 147 Engine Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 1999 Volkswagen Jetta without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Volkswagen Jetta, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Dayco, Dorman, and more. FELPRO Engine Parts start at just $20.99 and boast an impressive 4.6 stars average rating from customers. Dayco and Dorman also bring quality to the table, with Engine Parts available starting at $9.99, and at an average 4.5 stars rating. With 552 customer reviews and counting, our 1999 Volkswagen Jetta Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Volkswagen Jetta is always ready to roll. We’re committed to providing you with everything you need to keep your Jetta in top shape, all in one place. Start shopping confidently below for your 1999 Volkswagen Jetta!

Best-Selling Engine Mounts for 1999 Volkswagen Jettas

Enhance the driving experience in your Volkswagen with 14 quality Engine Mount components, starting at $23.79.

show more show less

from

$109.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 00-06; VW 00-06;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2000-2006
Weight approx: 5 Lbs
HYDRAULIC

from

$29.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to VW 85-99;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1985-1999
Weight approx: 2 Lbs
HYDRAULIC

from

$111.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 06-15; VW 98-21;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1998-2021
Weight approx: 5 Lbs
HYDRAULIC

from

$27.99

Available for many popular sporty and performance front wheel drive vehicles. A real must to use for sport compact competition and performance uses. Helps reduce wheel hop and traction loss. Prevents damage to other vehicle components. Improves and even restores broken motor mounts. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.

Product Features:

Prevents Tearing of Original Soft Mount Material
A Must-Use for High Performance Conditions
Eliminates Excess Engine Movement

from

$86.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
Premium materials and construction to dampen vibration
Additional factory parts included where applicable
High quality construction with premium materials for durability
Application specific for this vehicle

from

$62.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
Produced by an Original Equipment supplier
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity

from

$30.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 93-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-2002
Weight approx: 2 Lbs
RUBBER MOUNT

from

$23.79

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 98-11;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1998-2011
Weight approx: 1 Lbs
SUSPENSION SUBFRAME
ENGINE CRADLE BUSHING

from

$111.99

All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
Produced by an Original Equipment supplier
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance

from

$76.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 93-99;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-1999
Weight approx: 3 Lbs
HYDRAULIC

from

$61.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 92-99;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-1999
Weight approx: 4 Lbs
HYDRAULIC

from

$59.99

All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
Produced by an Original Equipment supplier
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance

from

$34.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 93-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-2002
Weight approx: 4 Lbs

from

$32.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 93-99;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-1999
Weight approx: 3 Lbs

Most Popular 1999 Volkswagen Jetta Engine Timing Parts

Customize your Volkswagen with 22 Engine Timing Parts products like Engine Timing Belt Kit With Water Pumps, Timing Belts, and Timing Belt Jobs, all priced under $266.99.

show more show less

from

$119.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$39.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$186.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$142.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$38.99

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth w/ flat tip profile; designed to fit the timing sprockets precisely

from

$98.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$19.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$16.29

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$66.99

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$10.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$28.99

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a square tooth profile; designed to fit the timing sprockets precisely

from

$47.49

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round, reinforced tooth profile; designed to fit the timing sprockets precisely

from

$266.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$98.99

Designed to absorb changes in timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt, the Dayco hydraulic timing belt actuator keep belt tension at a constant level. It reduces noise, prevents belt flapping and ensures proper timing effectiveness throughout the entire service life of the belt. The Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.

Product Features:

Designed to dampen noise and enhance belt life
Keeps belt tension at a constant level for better performance
Meets OE fit, form and function criteria
Prevents belt flapping

from

$91.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$82.99

ENG TIMING BELT TNS

from

$72.73

The FEBI Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision tension assembly
OE specified guide rail when supplied
Durable long life performance

from

$32.49

The mechanical and automatic Tensioning Pulleys INA, permanently guarantee the constant maintenance of belt tension, doesn’t matter the external conditions and frequent speed changes that happen in daily driving, and assure the proper functioning of Distribution System and Accessories.

from

$13.99

ENGTMNG BLT IDLRPLLY

from

$12.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$11.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$11.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Top Picks for 1999 Volkswagen Jetta Engine Gaskets and Seals

Upgrade Volkswagen Jettas with top-quality Engine Gaskets and Seals parts, including 15 OEM and aftermarket selections for your 1999 model.

show more show less

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$28.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$32.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$19.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$32.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$22.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$117.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$78.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$67.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$40.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications
Zero engine leakage for late model vehicles.

from

$29.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$22.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications
Zero engine leakage for late model vehicles.

from

$21.29

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications
Zero engine leakage for late model vehicles.

from

$17.29

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Low friction, Minimum power consumption, High chemical resistance, Low breakaway torque after standstill.
Able to be used in applications with minimal lubrication.
Thermal properties with a wide range of operating temperatures.

from

$6.79

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications

In-Demand Valve Cover and Cylinder Heads for 1999 Volkswagen Jettas

Select from 18 premium Valve Cover and Cylinder Heads parts for your 1999 Volkswagen Jetta, with prices ranging from $13.99 to $251.99.

show more show less

from

$20.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$52.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$30.99

Head sets without head gasket(s)
Requires purchase of head gasket(s) separately
Premium quality parts
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted

from

$33.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$251.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$164.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$141.99

Product Features:

Guaranteed fitment
Cracked valve covers can create troublesome vacuum leaks and allow leaking oil to damage engine components
URO Parts’ replacement valve covers are precisely manufactured to OE dimensions for easy installation and maximum protection of valvetrain
Durable high-quality metal or plastic material is corrosion-resistant and withstands oil vapor and intense engine heat

from

$72.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$62.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$39.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$38.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$35.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$32.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$28.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$28.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Head bolt replacement recommended.
Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.
When a specific tightening torque has been reached, the bolts are turned further through a defined angle, which pre-loads them into the plastic region. Consequently, no retorquing is necessary.

from

$19.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Head bolt replacement recommended.
Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.
When a specific tightening torque has been reached, the bolts are turned further through a defined angle, which pre-loads them into the plastic region. Consequently, no retorquing is necessary.

from

$19.79

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$13.99

Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.

Most Sold 1999 Volkswagen Jetta Camshafts

Explore our best-selling Volkswagen parts for the 1999 Jetta among 11 OEM and aftermarket options starting from $8.29.

show more show less

from

$12.79

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
Neodymium magnet produces max high voltage output at all speeds

from

$90.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$20.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$135.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$141.99

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$126.99

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$95.99

Bosch OE quality camshaft sensors for highly accurate measuerment, fuel consumption reduction and lower emissions.

Product Features:

Robust design with Twist insensitive mounting (TIM)
Reliable digital measurement and wide temperature range
High accuracy and long service life

from

$29.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$17.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$15.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$8.29

Top-Rated Engine Parts Brands For Your 1999 Volkswagen Jetta

Shop for the best-rated brands offering Engine Parts and other products for your 1999 Volkswagen Jettas. Below you’ll find some of our best rated Engine Parts from FELPRO, Dayco, and Dorman, and more. Engine Parts from these brands that fit a 1999 Jetta start at just $9.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1999 Volkswagen Jetta Engine Parts

When it comes to maintaining or upgrading your 1999 Volkswagen Jetta, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1999 Volkswagen Jetta. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $20.99, with an average price of just $33.66. Plus, with over 9 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $52.99

(1)

Engine Crankshaft Seal Kit

“I have trusted Felpro for over 35 years and they’ve never let me down”

from $20.99

(2)

CYLINDER HEAD BOLT SET

“Be certain you have the correct Ribe bits to install these bolts. A Torx Plus bit will not work and the bolt will strip if torque angle is applied.”

from $26.99

(6)

Engine Oil Pan Gasket Set – PermaDry molded rubber

“Fit and sealed. As good as ONE or better.”

Popular Dayco 1999 Volkswagen Jetta Engine Parts

Dayco auto parts is one of the highest quality Engine Part brands in the market. Any 1999 Volkswagen Jetta owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 1999 Jetta, Advance Auto Parts carries a full inventory of 3 Dayco Engine Parts. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Dayco Engine Parts range from $119.99 to $186.99, plus, with more than 12 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $119.99

(1)

Timing Water Pump Kit; With Pump, Timing Belt And Tensioner

“Exact fit worked perfectly”

from $186.99

(1)

Water Pump Kit With Components And Belt, Dayco

“I did maintenance on the car and it runs great”

from $142.99

(10)

Timing Water Pump Kit; With Pump, Timing Belt And Tensioner

“Good Quality”

FAQs for 1999 Volkswagen Jetta Engine Parts

Which Engine Parts are best-sellers for 1999 Volkswagen Jettas?

Out of 147 Engine Parts that fit 1999 Volkswagen Jettas, the following parts are the top sellers:

Air Charge Temperature Sensor Connector (20975509) – $12.79
Engine Oil Pan Gasket Set – PermaDry molded rubber (15780849) – $26.99
Timing Water Pump Kit; With Pump, Timing Belt And Tensioner (10023644) – $142.99

What’s the price range for 1999 Volkswagen Jetta Engine Parts?

Engine Part prices for the 1999 Volkswagen Jetta start at $1.79 and go up to $938.99 for the most premium parts.

What’s the average price of a Engine Part for a 1999 Volkswagen Jetta?

The average price for Engine Parts for the 1999 Volkswagen Jetta is $66.22. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Volkswagen Jetta model years?

Yes, we currently carry Engine Parts for 44 model years of Volkswagen Jettas between 1980 and 2025. Engine Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Engine Parts for my 1999 Volkswagen Jetta?

The cheapest 1999 Volkswagen Jetta Engine Parts we carry in stock are:

Steel Cup Expansion Plug 36.5mm, Height 0.410 (Sold by each) (16140165) – $1.79
Oil Dipstick Funnel (21297276) – $6.49
Fuel Injection Plenum Gasket (12575891) – $6.79
Stock Replacement Engine Assembly Lubricant, 4 oz. (50175373) – $6.99
Engine Valve Lifter (50262600) – $8.29

What are the top-rated Engine Parts that fit the 1999 Volkswagen Jetta?

Out of 552 reviews by customers, our 1999 Volkswagen Jetta Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1999 Volkswagen Jetta and their top-rated products:

Engine Gaskets and Seals
- Engine Oil Pan Gasket Set – PermaDry molded rubber (15780849) – $26.99
- Engine Valve Cover Gasket Set (15780884) – $28.99
Valve Cover and Cylinder Heads
- Engine Oil Pan Gasket Set – PermaDry molded rubber (15780849) – $26.99
- Engine Valve Cover Gasket Set (15780884) – $28.99
Engine Switches, Sensors and Relays
- Engine Oil Pan Gasket Set – PermaDry molded rubber (15780849) – $26.99
- Engine Valve Cover Gasket Set (15780884) – $28.99

What types of Engine Parts do you sell for my 1999 Volkswagen Jetta?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1999 Volkswagen Jetta:

Can I get help with 1999 Volkswagen Jetta Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Engine Parts and more.

What is your return policy for Volkswagen Jetta Engine Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Jetta Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Volkswagen Jetta Engine Parts

Rotomaster – Remanufactured Turbocharger (Part No.K8170101R)

Sealed Power – Engine Piston Ring Set (Part No.E-959K)

FAG US – General Seal (Part No.SS2412)

Bosch – Pressure Sensor (Part No.0261230388)

Felpro – Engine Conversion Gasket Set (Part No.CS 26455)

Dorman – Turbocharger Oil Feed Line (Part No.667-607)

Dorman – Help – Engine Oil Dipstick Tube: Direct Replacement, Steel (Part No.917-475)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.4-4465P)

National – Shaft Repair Sleeve (Part No.99128)

Dorman – Help – Engine Oil Fill Cap (Part No.80989)

Dorman – Steel Cup Expansion Plug 36.5mm, Height 0.410 (Sold by each) (Part No.555-103)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84132)

Felpro – Rear Main Seal Set (Part No.BS 40712)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5741)

Rein – Oil Pan Kit (Part No.ESK0134)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50107 C)

INA US – ENG OIL PMP CHAIN ST (Part No.ZC0067K)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72189)

Carquest Premium – Engine Oil Level Sensor (Part No.FFC1236)

Dayco – Timing Water Pump Kit; With Pump, Timing Belt And Tensioner (Part No.WP296K1AM)

Dayco – Premium Timing Belt, 51.38 Inch With 137 Round Tooth (Part No.95242)

Spectra Premium – Engine Oil Pan (Part No.VWP24A)

Dorman – Harmonic Balancer Assembly (Part No.594-335)

Dorman – Engine Valve Cover Kit (Part No.264-751)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Dorman – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.02604)

Victor Reinz – Engine Oil Pan Gasket Set (Part No.10-10318-01)

Anchor – Engine Mount: Right, 1 Piece (Part No.9658)

Anchor – Transmission Mount: Left, Rear Left, 1 Piece (Part No.8236)

Anchor – Engine Mount: Right, 1 Piece (Part No.9092)

Energy Suspension – Motor Mount Insert (Part No.15.1105R)

Beck/Arnley – Transmission Mount (Part No.104-1755)

Rein – Engine Mount (Part No.AVE0506)

Anchor – Engine Mount: Front, 1 Piece (Part No.8617)

Anchor – Engine Mount: Left, Right, 1 Piece (Part No.9264)

Rein – Engine Mount (Part No.AVE0381R)

Anchor – Engine Mount: Front, Rear, 1 Piece (Part No.9607)

Anchor – Engine Mount: Right, Rear Right, 1 Piece (Part No.9065)

Rein – Engine Mount (Part No.AVE0009R)

Anchor – Engine Mount: Right, Rear Right, 1 Piece (Part No.8841)

Anchor – Engine Mount: Rear Right, 1 Piece (Part No.8616)

Dayco – Timing Water Pump Kit; With Pump, Timing Belt And Tensioner (Part No.WP296K1AM)

National – Shaft Repair Sleeve (Part No.99177)

Dayco – Water Pump Kit With Components And Belt, Dayco (Part No.WP262K2A)

Dayco – Timing Water Pump Kit; With Pump, Timing Belt And Tensioner (Part No.WP296K1A)

Dayco – Premium Timing Belt, 43.47 Inch With 138 Round Tooth, With Flat Tip (Part No.95296)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1157)

Felpro – Engine Crankshaft Seal Kit (Part No.TCS 45038)

National – Multi-Purpose Seal (Part No.3476)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84132)

Felpro – Engine Camshaft Seal (Part No.TCS 45357)

Dayco – Premium Timing Belt, 46.5 Inch With 124 Square Tooth (Part No.95262)

Dayco – Premium Timing Belt, 52.88 Inch With 141 Round Tooth (Part No.95301)

Dayco – Timing Water Pump Kit; With Pump, Timing Belt, Tensioner And 3 Idlers (Part No.WP301K2A)

Dayco – Hydraulic Timing Belt Actuator, Dayco (Part No.85049)

Dayco – Timing Belt Kit With Components And Belt, Dayco (Part No.95296K1)

INA US – ENG TIMING BELT TNS (Part No.ZT03371)

Febi – Timing Chain Tensioner (Part No.A511066888FEB)

INA US – Engine Timing Belt Tensioner (Part No.ZT-9-5505)

INA US – ENGTMNG BLT IDLRPLLY (Part No.ZP01221)

FAG US – General Seal (Part No.SS2412)

FAG US – Shaft Seal, Camshaft (Part No.SS2345)

Victor Reinz – Engine Timing Cover Seal (Part No.81-34367-00)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30708 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50528 R-1)

Felpro – REAR MAIN BEARING SEAL SET (Part No.BS 40427)

Felpro – Engine Oil Pan Gasket Set – High-temperature Rubber-coated fiber (Part No.OS 30781)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71074-1)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72682-2)

Felpro – Engine Conversion Gasket Set (Part No.CS 26161)

Victor Reinz – Engine Oil Pan Gasket Set (Part No.71-27321-10)

Victor Reinz – Engine Conversion Gasket Set (Part No.08-27321-02)

Victor Reinz – Molded Rubber Valve Cover Gasket: Direct Fit, 1 Piece (Part No.71-33851-00)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72682)

Victor Reinz – Molded Rubber & Plastic Valve Cover Gasket Set: Direct Fit, 2 Pieces (Part No.15-10111-01)

Victor Reinz – Molded Rubber & Plastic Valve Cover Gasket Set: Direct Fit, 2 Pieces (Part No.15-10092-01)

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-26058-02)

Victor Reinz – Fuel Injection Plenum Gasket (Part No.71-31984-00)