1999 Toyota 4Runner Engine Parts

Below you will find various in-demand Toyota Engine Parts, components and accessories for your 1999 4Runner. Advance Auto Parts has popular 4Runner parts like Valve Cover and Cylinder Heads, Engine Mounts, Engine Timing Parts and more. You’ll also find aftermarket and OEM Engine Parts for other 4Runner model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1999 Toyota 4Runner Engine Parts below and start saving instantly.

Popular 1999 Toyota 4Runner Engine Parts Categories

Valve Covers

Engine Timing Belt Kit With Water Pumps

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Plenum Gasket Sets

Crankshaft Position Sensors

Harmonic Balancers

Timing Cover Gasket Sets

Timing Belt Tensioner Springs

Cylinder Head Gasket Sets

Cylinder Head Gaskets

Crankshaft Seals

Timing Belts

Timing Belt Tensioners

Oil Caps

Camshaft Position Sensor Connectors

Timing Chain Tensioners

Rubber Freeze Plugs

Timing Cover Plugs

Oversized Main Bearings

Standard Rod Bearing Sets

Oil Pump Kits

Timing Chains

Camshaft Seals

Freeze Plug – Block Kits

Valve Cover Cam Bore Plugs

Expansion Plugs

Engine Variable Timing Solenoid Connectors

Balance Shaft Belt Tensioners

Timing Dampers

Cylinder Head Bolt Washer Sets

Oil Pump Seals

Remanufactured Engines

Cylinder Heads

Engine Assembly Lube

Engine Oil Pump Primers

Engine Oil Cooler Relay

Supercharger Bypass Solenoid Connector

Essential Engine Parts for 1999 Toyota 4Runners

from

$223.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$328.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$17.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$17.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$36.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$186.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$181.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Calibrated to factory specified yield point
Quality construction for durability
Premium construction for durability
Application specific for this vehicle

from

$12.79

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
Neodymium magnet produces max high voltage output at all speeds

from

$55.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Meet or exceed OEM performance requirements. Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience.

Product Features:

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$229.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$58.99

DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.

from

$54.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Utilizing high grade materials to ensure peak conductivity and perfect connections
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$16.99

This engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original part that is missing or cracked due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$35.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$124.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$27.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$32.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$4799.99

Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$35.99

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, Timing Guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information

from

$81.99

Designed to absorb changes in timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt, the Dayco hydraulic timing belt actuator keep belt tension at a constant level. It reduces noise, prevents belt flapping and ensures proper timing effectiveness throughout the entire service life of the belt. The Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.

Product Features:

Designed to dampen noise and enhance belt life
Keeps belt tension at a constant level for better performance
Meets OE fit, form and function criteria
Prevents belt flapping

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$274.99

All components meet or exceed O.E.M. specifications in manufacturing and material. SET INCLUDES: 9-4196 Engine Timing Chain (1 EA), 9-4197 Engine Timing Chain (1 EA), 9-5358 Engine Timing Chain Tensioner (1 EA), 9-5359 Engine Timing Chain Tensioner (1 EA), 9-5360 Engine Timing Chain Tensioner Guide (1 EA), 9-5361 Engine Timing Damper (1 EA), 9-5362 Engine Timing Damper (1 EA), 9-5363 Engine Timing Damper (1 EA), 9-5364 Engine Timing Damper (1 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$103.99

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$512.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$182.94

DENSO’s Crankshaft Position Sensors are manufactured to the stricktest OE standards resulting in unsurpassed reliability, durability, and detection accuracy.

Product Features:

Innovative MRE sensor design uses a pair of MREs on an Integrated Circuit (IC) chip for extreme accuracy
Molded IC chip located inside the cylindrical magnet is positioned closer to the gears
Polyphenylene sulfide resin coating resists damage from engine oil, fuel and emission byproducts

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$18.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$48.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to TOYOTA 88-04;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1988-2004
Weight approx: 2 Lbs
PART GROUP: 8164, 8164

Upgrade your 1999 Toyota 4Runner with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1999 Toyota 4Runner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Engine Parts are key to keeping your 4Runner functioning at its best. At Advance Auto Parts, we offer a wide selection of 103 Engine Parts for the 1999 Toyota 4Runner, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1999 Toyota 4Runner at great prices. Our Engine Parts inventory for this model ranges from just $1.79 to $3,799.99, with an average price of $193.09. Our 103 Engine Parts in stock come from 21 trusted brands, so you’re sure to find the right part for your 1999 Toyota 4Runner without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Toyota 4Runner, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Dorman, Imperial, and more. FELPRO Engine Parts start at just $35.99 and boast an impressive 4.6 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Engine Parts available starting at $18.99, and at an average 4.2 stars rating. With 123 customer reviews and counting, our 1999 Toyota 4Runner Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Toyota 4Runner is always ready to roll. We’re committed to providing you with everything you need to keep your 4Runner in top shape, all in one place. Start shopping confidently below for your 1999 Toyota 4Runner!

Best-Selling Valve Cover and Cylinder Heads for 1999 Toyota 4Runners

Enhance the driving experience in your Toyota with 21 quality Valve Cover and Cylinder Head components, starting at $17.99.

show more show less

from

$35.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$17.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$155.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$28.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$37.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$98.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$328.99

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$83.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$83.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$292.99

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$18.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$384.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$979.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$972.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$928.99

New Cylinder Heads are complete new builds; casting & parts including new valve stem seals, soft plugs & verified camshafts all threads are checked & all passages & part interfaces are pressure checked.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$910.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$901.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$845.99

New Cast Heads are complete builds; new casting & reman parts including new valve stem seals, soft plugs & verified camshafts all threads are checked & all passages & part interfaces are pressure checked.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$576.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$181.99

Matches OE form, fit and function
Calibrated to factory specified yield point
Quality construction for durability
Premium construction for durability
Application specific for this vehicle

from

$23.79

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

Top Picks for 1999 Toyota 4Runner Engine Timing Parts

Upgrade Toyota 4Runners with top-quality Engine Timing Parts parts, including 20 OEM and aftermarket selections for your 1999 model.

show more show less

from

$117.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$154.99

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$267.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$48.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
Timing marks are applied on the belt for proper installation

from

$54.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Utilizing high grade materials to ensure peak conductivity and perfect connections
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$57.99

Designed to dampen noise and enhance belt life
Keeps belt tension at a constant level for better performance
Meets OE fit, form and function criteria
Prevents belt flapping

from

$1.79

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$211.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$271.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S754 Engine Timing Camshaft Sprocket (1 EA), S593 Engine Timing Crankshaft Sprocket (1 EA), 9-4196 Engine Timing Chain (1 EA), 9-4197 Engine Timing Chain (1 EA), 9-5358 Engine Timing Chain Tensioner (1 EA), 9-5359 Engine Timing Chain Tensioner (1 EA), 9-5360 Engine Timing Chain Tensioner Guide (1 EA), 9-5361 Engine Timing Damper (1 EA), 9-5362 Engine Timing Damper (1 EA), 9-5363 Engine Timing Damper (1 EA), 9-5364 Engine Timing Damper (1 EA).

Product Features:

Timing Chain Kits includes all components for a quick and efficient replacement
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$64.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$274.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$89.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$46.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Designed to meet or exceed OEM performance requirements. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$33.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$31.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$23.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$23.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$17.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$13.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$13.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

In-Demand Camshafts for 1999 Toyota 4Runners

Select from 10 premium Camshafts parts for your 1999 Toyota 4Runner, with prices ranging from $4.99 to $96.99.

show more show less

from

$41.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$22.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$8.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$45.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$96.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$4.99

Product Features:

Brand may vary by location

from

$86.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Delphi products are manufactured in a Delphi ISO certified facility
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

from

$36.49

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$17.99

Design type: springless; end cap
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$65.99

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Most Sold 1999 Toyota 4Runner Engine Gaskets and Seals

Explore our best-selling Toyota parts for the 1999 4Runner among 8 OEM and aftermarket options starting from $8.99.

show more show less

from

$35.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$37.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$22.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$8.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$8.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$52.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$27.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$16.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

Top-Rated Engine Parts Brands For Your 1999 Toyota 4Runner

Shop for the best-rated brands offering Engine Parts and other products for your 1999 Toyota 4Runners. Below you’ll find some of our best rated Engine Parts from FELPRO, Dorman, and Imperial, and more. Engine Parts from these brands that fit a 1999 4Runner start at just $18.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1999 Toyota 4Runner Engine Parts

When it comes to maintaining or upgrading your 1999 Toyota 4Runner, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1999 Toyota 4Runner. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.99, with an average price of just $36.66. Plus, with over 16 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $35.99

(3)

Engine Valve Cover Grommet Set

“Great parts”

from $37.99

(6)

Engine Valve Cover Gasket Set

“Needs Spark Plug Gaskets. Does not come with them . Consider a different brand or buy seperatly. I needed new ones. Try to take care of yours you migh”

from $35.99

(7)

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET

“Great parts”

Popular Dorman 1999 Toyota 4Runner Engine Parts

Dorman auto parts is one of the highest quality Engine Part brands in the market. Any 1999 Toyota 4Runner owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1999 4Runner, Advance Auto Parts carries a full inventory of 2 Dorman Engine Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Dorman Engine Parts range from $18.99 to $156.99, plus, with more than 3 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $18.99

(2)

Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each)

“These worked great for making a skidoo secondary clutch tool.”

from $156.99

(1)

Harmonic Balancer Assembly

“1999 4 Runner (2.7 L 4-cylinder) with bad rattling noise, determined the Harmonic Balancer had separated into two pieces… this fixed the baby and sh”

FAQs for 1999 Toyota 4Runner Engine Parts

Which Engine Parts are best-sellers for 1999 Toyota 4Runners?

Out of 103 Engine Parts that fit 1999 Toyota 4Runners, the following parts are the top sellers:

Multi-Purpose Seal (18442666) – $9.99
Camshaft Sensor (12339315) – $22.99
Multi-Purpose Seal (15440036) – $9.99

What’s the price range for 1999 Toyota 4Runner Engine Parts?

Engine Part prices for the 1999 Toyota 4Runner start at $1.79 and go up to $3,799.99 for the most premium parts.

What’s the average price of a Engine Part for a 1999 Toyota 4Runner?

The average price for Engine Parts for the 1999 Toyota 4Runner is $193.09. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Toyota 4Runner model years?

Yes, we currently carry Engine Parts for 39 model years of Toyota 4Runners between 1984 and 2024. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Engine Parts for my 1999 Toyota 4Runner?

The cheapest 1999 Toyota 4Runner Engine Parts we carry in stock are:

Steel Cup Expansion Plug 1-3/8 In., Height 0.340 (sold by each) (16140184) – $1.79
Steel Cup Expansion Plug 30.25mm, Height 0.301 (Sold by each) (16140162) – $1.79
Steel Cup Expansion Plug 30.25mm, Height 0.301 (3492605) – $2.99
Oil Seal (10426044) – $4.99
Oil Seal (11493997) – $4.99

What are the top-rated Engine Parts that fit the 1999 Toyota 4Runner?

Out of 123 reviews by customers, our 1999 Toyota 4Runner Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1999 Toyota 4Runner and their top-rated products:

Engine Gaskets and Seals
- Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (15780334) – $22.99
- Engine Valve Cover Gasket Set (15780416) – $37.99
- Engine Coolant Outlet Gasket (5992869) – $8.99

What types of Engine Parts do you sell for my 1999 Toyota 4Runner?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1999 Toyota 4Runner:

Can I get help with 1999 Toyota 4Runner Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Engine Parts and more.

What is your return policy for Toyota 4Runner Engine Parts?

Advance Auto Parts keeps returns simple. For new Toyota 4Runner Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Toyota 4Runner Engine Parts

PowerBond – Street Performance Harmonic Balancer; 159mm Diameter (Part No.PB1146ST)

Dorman – Valve Covers: with Gasket, Direct Replacement, Aluminum (Part No.264-978)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S593)

Felpro – CAMSHAFT REAR PLUG SEAL SET (Part No.TCS 45979)

Victor Reinz – Engine Oil Pan Gasket Set (Part No.10-10318-01)

Dayco – Water Pump Kit With Components And Belt, Dayco (Part No.WP154K1B)

Beck/Arnley – CYLINDER HEAD BOLT SET (Part No.016-1012)

Carquest – Air Charge Temperature Sensor Connector (Part No.28423)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5579)

Dorman – Engine Oil Pan: Direct Fit, Steel, Sump, 4.8 Quart (Part No.264-144)

DENSO – Relay (Part No.567-0038)

Carquest – Electrical Connector (Part No.PT914)

Dorman – Help – Engine Oil Filler Cap (Part No.84111)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72422)

Dayco – Timing Component Kit; With Camshaft Belt Tensioner And Idler, 2 Piece Set (Part No.84081)

Felpro – Engine Crankshaft Seal Kit (Part No.TCS 46131)

National – Engine Camshaft Seal (Part No.710554)

Spartan – Engine Long Block; Toyota 2UZFE 8/04-09 Engine (Part No.853A)

Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5610)

Dayco – Hydraulic Timing Belt Actuator, Dayco (Part No.85016)

National – Multi-Purpose Seal (Part No.223801)

Cloyes Gear – Engine Timing Chain Kit (Part No.9-4196SX)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84040)

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1244)

DENSO – First Time Fit Crankshaft Position Sensor (Part No.A2255243715ND)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Dorman – Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each) (Part No.570-008)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.8164)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72422)

Felpro – CAMSHAFT REAR PLUG SEAL SET (Part No.TCS 45979)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9465 PT-2)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72133)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72168)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72182)

Dorman – Valve Covers: with Gasket, Direct Replacement, Aluminum (Part No.264-978)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9227 PT-1)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9229 PT-1)

Dorman – Valve Covers: with Gasket, Direct Replacement, Aluminum (Part No.264-977)

Felpro – Engine Cylinder Head Bolt Washer Set (Part No.ES 72899)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9227 PT-1)

Spartan – Engine Cylinder Head; Toyota 2R/3RZFE Cyl Head (Part No.2899)

Spartan – Engine Cylinder Head; Toyota 5VZF-E RGT Head (Part No.2868)

Spartan – Engine Cylinder Head; Toyota 5VZFE Left Head (Part No.2848N)

Spartan – Engine Cylinder Head; Toyota 5VZFE Rgt Head (Part No.2868N)

Spartan – Engine Cylinder Head; Toyota 2R/3RZFE Cyl Head (Part No.2899N)

Spartan – Engine Cylinder Head; Toyota 5VZFE Rgt Head (Part No.2868NC)

Spartan – Engine Cylinder Head; Toyota 5VZF-E LEFT Head (Part No.2848)

Beck/Arnley – CYLINDER HEAD BOLT SET (Part No.016-1012)

Sealed Power – Engine Valve Lifter (Part No.HT-2299)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.8164)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2236)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84091)

Dayco – Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And Idler (Part No.WP271K1C)

Dayco – Premium Timing Belt, 60.16 Inch With 191 Round Tooth (Part No.95271)

Carquest – Electrical Connector (Part No.PT914)

Dayco – Hydraulic Timing Belt Actuator (Part No.85046)

Dorman – Steel Cup Expansion Plug 1-3/8 In., Height 0.340 (sold by each) (Part No.555-025)

Dayco – Timing Belt Kit With Components And Belt, Dayco (Part No.95271K1)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 106, 82 Links, Timing Components, With Sprockets (Part No.9-4196S)

Cloyes Gear – Engine Timing Chain (Part No.9-4197)

Cloyes Gear – Engine Timing Chain Kit (Part No.9-4196SX)

Cloyes Gear – Engine Timing Chain (Part No.9-4196)

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5360)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5358)

Cloyes Gear – Engine Timing Damper (Part No.9-5361)

Cloyes Gear – Engine Timing Damper (Part No.9-5362)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S754)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S593)

Cloyes Gear – Engine Timing Damper (Part No.9-5363)

Cloyes Gear – Engine Timing Damper (Part No.9-5364)

National – Shaft Repair Sleeve (Part No.99147)

Carquest Premium – Camshaft Sensor (Part No.CSC1082)

Carquest Premium – Multi-Use Connector (Part No.PTA1149)

NTK – Engine Camshaft Position Sensor (Part No.EC0071)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA2228)

Driveworks – Oil Seal (Part No.S-223801)

Delphi – Engine Camshaft Position Sensor (Part No.SS10502)

Carquest Premium – Camshaft Sensor (Part No.CSC1352)

National – Multi-Purpose Seal (Part No.710861)