1999 Nissan Sentra Motor Oil

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional 20W50 5 QT utilizes a blend of high-quality conventional base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions.

FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:

• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Helps minimize oil consumption
• Meets ILSAC GF-6 specs
• Engine Life Extension: Castrol« GTX« has been helping to extend engine life for over 50 years, making it one of the most trusted motor oil brands today.
• Conventional Oil Composition: As a premium conventional motor oil, Castrol« GTX« meets the needs of both consumers and vehicle manufacturers.
• Superior Performance: Exceeds tough industry standards by protecting against new oil splatter formation, ensuring optimal engine performance.
• Versatile SAE Weight: With an SAE oil weight of 10W-40, Castrol« GTX« is suitable for a wide range of vehicles, providing reliable protection and performance.

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for high mileage engines: FRAM High Mileage 10W30 Engine Oil is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 miles.

Uniquely designed for your drive, Pennzoil Extended Care Full Synthetic motor oil combats engine aging to extend the life of your engine

Product Features:

• Pennzoil Extended Care Full Synthetic helps keep your engine clean by preventing engine deposits and formation of sludge
• Natural gas is synthesized into a 99.5% pure base oil, resulting in better oxidative stability, cold temperature performance, and volatility control
• Each Pennzoil premium oil is specially formulated to meet the requirements of your engine and unique driving style
• Recommended for use in all vehicles requiring the use of SAE 5W-30 viscosity grade engine oils

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

• Patented Phosphorus Replacement Technology to help extend the life of your emission system
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection (As measured in latest Sequence IVA engine test)
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
• Full Synthetic Composition: The 0W-20 full synthetic oil composition provides superior performance and protection, making it ideal for high mileage cars that operate under extreme temperatures.
• Enhanced Engine Performance: Designed to help your car defy its miles, Castrol EDGE High Mileage helps maintain and extend maximum performance and efficiency as your vehicle ages.
• Optimal for High Mileage Vehicles: Specifically formulated for high mileage cars, this oil helps prevent performance loss and efficiency decline, ensuring your vehicle runs smoothly even as it ages.

Quaker State Full Synthetic 0W-20 motor oil delivers strong engine performance and protection against deposits between oil changes. It’s designed to protect today’s sophisticated engines, including modern turbocharged engines. Quaker State Full Synthetic motor oil is the best of the Quaker State portfolio. It can be used in both new and older vehicles, especially high performance vehicles such as sports cars, SUVs, trucks, and minivans. Additionally, Quaker State Full Synthetic 0W-20 is compatible with biofuels ranging from E10 to E85 and is suitable for hybrid engines. It provides high resistance to oxidation, keeping the oil fresher for longer, and it reduces friction to maximize horsepower in your vehicle (compared to Quaker State conventional and synthetic blend motor oils). It exceeds the requirements of the following industry specifications: API SP-Resource Conserving, API SN Plus and all previous categories; ILSAC GF-6a and all previous ILSAC Standards. Quaker State Full Synthetic 0W-20 motor oil meets the specifications for: Chrysler MS-6395; GM dexos1 Gen 2; Ford WSS-M2C947-A; Ford WSS-M2C947-B1. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:

• Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
• Provides improved fuel economy (based on the latest industry standard)
• Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
• Formulated with high resistance to oxidation, keeping the oil fresher for longer.
• Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
• Maintains required viscosity from start to finish, providing optimal protection
• Suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.
• Compatible with biofuels ranging from E10 to E85 and suitable for hybrid vehicles.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
• Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
• Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
• Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.

Pennzoil Platinum full synthetic SAE 0W-20 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 0W-20 motor oil is licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines.

Product Features:

• Engineered to provide a high-quality base oil using our revolutionary PurePlus gas-to-liquid technology in combination with a high performance additive system
• Helps protect against the effects of low speed pre-ignition (LSPI) in modern turbocharged engines
• Provides better fuel economy which helps you drive an extra 550 miles per year vs a dirty engine
• Offers unsurpassed wear protection by keeping engine parts from coming into contact
• Delivers outstanding piston cleanliness, keeping pistons up to 50% cleaner than required by the toughest industry standards- based on Sequence IIIH engine test results
• Specifications, Approvals and Recommendations: FCA MS-6395; Ford WSS-M2C947-B1; GM dexos1TM Gen 2
• Exceeds the requirements of the following industry specifications: API SN PLUS, API SN-RC and all previous categories; ILSAC GF-5; ACEA A1/B1
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual.

10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

Royal Purple HMX SAE 5W-20 High-Mileage Synthetic Motor Oil, 5 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:

• Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
• Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology
• HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
• Reduces friction and metal-to-metal contact for peak engine performance
• Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
• Superior Engine Cleanliness: Fortified with stout detergents, this oil effectively removes engine build-up and deposits, maintaining cleanliness and promoting engine longevity.
• High-Mileage Protection: Classified as a high-mileage oil, it provides specialized protection for older engines, ensuring they run smoothly and efficiently.
• Synthetic Composition: With a synthetic oil composition and an SAE weight of 5W-20, it offers excellent performance and protection in a wide range of temperatures.

Pennzoil Platinum full synthetic SAE 10W-30 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Our Pennzoil Full Synthetic products are engineered for modern engines and offer the following benefits without compromise. Better Fuel Economy. With Pennzoil Platinum full synthetic motor oil, you can drive on average an extra 550 miles vs a dirty engine. Protects Horsepower. Pennzoil Platinum Full Synthetic motor oil helps protect against loss of power by helping to protect your engine against wear and deposit formation. Unsurpassed Wear Protection. When it comes to protecting the internal parts of your engine from metal-on-metal contact, no other leading synthetic motor oil provides better wear protection than Pennzoil Platinum Full Synthetic motor oil. Excellent Temperature Performance. When exposed to extreme cold temperatures, Pennzoil Platinum Full Synthetic motor oil flows faster, meaning that the motor oil travels quickly to lubricate the various engine parts.

Product Features:

• Provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
• Pennzoil Platinum 10W-30 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
• No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Helps protect engines from loss of power
• Formulated for modern turbocharged engines-GF-6, API SP/SP-Resource Conserving and all previous categories
• Revolutionary PurePlus Technology: Engineered from Pennzoil’s patented PurePlus gas-to-liquid technology, converting pure natural gas into high-quality, full synthetic base oil that is 99.5% pure.
• Superior Wear Protection: Offers unsurpassed protection against metal-on-metal contact, ensuring the internal parts of your engine are well-protected from wear and deposit formation.
• Engine Protection for Modern Technologies: Specially designed to protect against low-speed pre-ignition in modern turbocharged gasoline direct injection (TGDI) engines, providing complete engine protection.

Quaker State Full Synthetic 10W-30 motor oil delivers strong engine performance and protection against deposits between oil changes. It’s designed to protect today’s sophisticated engines, including modern turbocharged engines. Quaker State Full Synthetic motor oil is the best of the Quaker State portfolio. It can be used in both new and older vehicles, especially high performance vehicles such as sports cars, SUVs, trucks, and minivans. Additionally, Quaker State Full Synthetic 10W-30 is compatible with biofuels ranging from E10 to E85 and is suitable for hybrid engines. It provides high resistance to oxidation, keeping the oil fresher for longer, and it reduces friction to maximize horsepower in your vehicle (compared to Quaker State conventional and synthetic blend motor oils). It exceeds the requirements of the following industry specifications: API SP-Resource Conserving and all previous categories; ILSAC GF-6a and all previous ILSAC Standards. Quaker State Full Synthetic 10W-30 motor oil meets the specifications for: Chrysler MS-6395; GM 6094M. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:

• Full synthetic 10W-30 motor oil provides strong engine performance and protection against deposits between oil changes
• Provides improved fuel economy (based on the latest industry standard)
• Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
• Formulated with high resistance to oxidation, keeping the oil fresher for longer.
• Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
• Maintains required viscosity from start to finish, providing optimal protection
• Suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.
• Compatible with biofuels ranging from E10 to E85 and suitable for hybrid vehicles.

Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:

• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Helps minimize oil consumption
• Meets ilsac gf-6 specs
• Unsurpassed thermal breakdown protection: GTX Engine Oil, 20W50 provides superior protection against thermal breakdown, ensuring that your engine stays cool and runs smoothly even under extreme conditions.

You trust your car to keep you going, even after 75,000 miles. Mobil 1 Extended Performance High Mileage full-synthetic motor oil 0W-20 gives engines with over 75,000 miles the extra care they need to go the distance. Formulated to help prevent leaks, it helps to protect critical engine parts for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s #1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 truck & suv advanced full-synthetic engine oil 0w-20 is specially formulated for hardworking trucks and suvs that operate in tough conditions like towing and hauling.
• Utilizes Mobil 1’s triple action+ formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees f) and low temperature protection (to -40 degrees f)
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Manufacturer part number: 123837

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Introducing the ultimate protection for vehicles with more than 75,000 miles: Valvoline Extended Protection Full Synthetic High Mileage Motor Oil with Ultra MaxLife Technology. Engineered to maximize engine life, it’s 10x stronger against oil breakdown and provides 50% better wear protection than industry standards. The new formulation combines Valvoline’s premium full synthetic with Ultra MaxLife Technology featuring seal conditioners to rejuvenate aging seals and prevent oil leaks. The result is our best performing motor oil ever for high mileage vehicles. It helps prevent engine breakdown in extreme operating conditions and is proven to protect high-mileage motors against wear, friction, heat, and deposits – the leading causes of expensive repairs. After 75,000 miles, your engine is ready for greater protection. Upgrade to Valvoline Extended Protection Full Synthetic High Mileage with Ultra MaxLife Technology and keep your car on the road for years to come.

Product Features:

• Our best performing high-mileage engine oil is formulated with ultra maxlife technology, the ultimate protection for vehicles with more than 75,000 miles
• Valvoline extended protection full synthetic high mileage engine oil is designed with premium seal conditioners to treat and prevent oil leaks
• 10x stronger against oil breakdown and 50% greater wear protection than industry standards
• Enhanced wear additives and friction-fighting agents to safeguard critical engine components
• Maximizes engine life: Valvoline Extended Protection Full Synthetic High Mileage Engine Oil is engineered to maximize engine life, providing superior wear protection and preventing expensive repairs.
• Ultra MaxLife Technology: The new formulation combines Valvoline’s premium full synthetic with Ultra MaxLife Technology featuring seal conditioners to rejuvenate aging seals and prevent oil leaks.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus replacement technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
• Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

• Patented phosphorus replacement technology to help extend the life of your emission system
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection (as measured in latest sequence iva engine test)
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Maximum Performance: Castrol EDGE High Mileage with Fluid TITANIUM Technology is designed to provide maximum performance for high mileage cars, even in extreme temperatures.
• Protects Catalytic Converter: Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus, protecting the catalytic converter and preserving the life of your emission system.

Formerly known as Shell Rotella® T Triple Protection, Shell Rotella® T4 Triple Protection 10W-30 Diesel Engine Oil is the most technically advanced Shell Rotella® formulation ever. This heavy-duty engine oil has been formulated to provide Triple Protection technology against wear, deposits and oil breakdown. It uses advanced additive technology to protect under the most severe engine conditions found in modern, low-emission engines. Plus, it provides outstanding wear protection, emissions system compatibility and shear stability. Outstanding Wear Protection: Shell Rotella® T4 10W-30 provides exceptional wear protection to help maximize engine efficiency and prolong engine life. Severe Duty Heavy Duty Diesel Engines: Shell Rotella® T4 10W-30 Triple Protection provides outstanding protection for virtually all heavy-duty diesel engines, including engines with the latest emission control using EGR and containing a Diesel Particular Filter. Off-Highway Applications: Shell Rotella® T4 10W-30 Heavy Duty Engine Oil is suitable for use in agricultural, mining, logging, and construction applications, even with high levels of fuel sulfur. Hardworking Diesel Engines: Suitable for use in diesel pick-up trucks. For technical questions, contact our Technical Help Desk at 1-(800) BEST-OIL or (800) 237-8645 Option 3, 1; or with complete Year/Make/Model information for a recommendation.

Product Features:

• Provides Triple Protection® against wear, deposits and oil breakdown for most heavy-duty engines
• Conventional Diesel Engine Oil formulated with advanced additive technology for enhanced deposit protection to help keep engines cleaner over the oil drain interval
• Provides increased shear stability for better viscosity control and optimal engine oil pressure compared to the previous formulation
• Protects your bottom line with a lower viscosity that allows for less engine resistance for improved fuel economy compared to an SAE 15W-40

You trust your car to keep you going, even after 75,000 miles. Mobil 1 Extended Performance High Mileage full-synthetic motor oil 0W-20 gives engines with over 75,000 miles the extra care they need to go the distance. Formulated to help prevent leaks, it helps to protect critical engine parts for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 Extended Performance High Mileage full-synthetic motor oil 0W-20 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes. (1)
• Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Manufacturer Part Number: 123836
• Leak Prevention: Specifically designed to help prevent leaks in engines with over 75,000 miles, offering extra care and maintenance for older vehicles.
• Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.
• Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
• Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®.

If you trust your vehicle to be there for you, you need to be there for its engine, with Mobil 1 Extended Performance full-synthetic motor oil 10W-30. Our ultimate full-synthetic motor oil meets or exceeds the industry’s toughest standards to help you get the most from your engine for up to 20,000 miles between oil changes, guaranteed.(1) Mobil 1 Extended Performance utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 High Mileage full-synthetic motor oil 10W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.(1)
• Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer Part Number: 102990
• Extended Engine Protection: Mobil 1 Extended Performance full-synthetic motor oil 10W-30 protects your engine for up to 20,000 miles or 1 year, ensuring long-lasting performance and reliability.
• Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines in passenger cars, SUVs, light vans, and light trucks.
• Industry-Leading Standards: Meets or exceeds the industry’s toughest standards, making it a trusted choice for car builders, experienced mechanics, and as the Official Motor Oil of NASCAR«.
• Industry-Leading Standards: Meets or exceeds the industry’s toughest standards, making it a trusted choice for car builders, experienced mechanics, and as the Official Motor Oil of NASCAR®.
• America’s No. 1 Synthetic Motor Oil Brand: Mobil 1 is the top synthetic motor oil brand at retail, trusted by consumers and professionals alike for its superior quality and performance.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.

Improved technology. Same hard work Shell Rotella® T4 Triple Protection® Heavy Duty Engine Oil builds upon the heritage of Triple Protection® you have come to depend on. Today, it¿s more advanced than ever, designed to provide hard working protection that adapts to driving conditions.

Product Features:

• Provides Triple Protection® against wear, deposits and oil breakdown for most heavy-duty engines
• Conventional Diesel Engine Oil formulated with advanced additive technology for enhanced deposit protection to help keep engines cleaner over the oil drain interval
• Provides increased shear stability for better viscosity control and optimal engine oil pressure compared to the previous formulation
• Protects your bottom line with a lower viscosity that allows for less engine resistance for improved fuel economy compared to an SAE 15W-40

FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
• Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
• Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.

Mobil Super 10W-40 synthetic blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus. (Or your vehicle’s OEM recommended oil change interval, whichever is longer. Some limitations apply, see Mobil Super Limited Warranty: https://www.mobil.com/en/lubricants/for-personal-vehicles/our-products/mobil-limited-warranties/mobil-super-limited-warranty)

Product Features:

• Mobil Super synthetic blend motor oil 10W-40 works to protect your engine from sludge and deposits for up to 5,000 miles
• Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
• Works to provide outstanding engine wear protection under a variety of operating conditions
• Enhanced formulation (vs. Mobil basic conventional oil ) helps to conserves oil viscosity for easier cold starting
• Recommended for gasoline cars and light-duty trucks
• Manufacturer Part Number: 124402