1999 Mazda B3000 Differentials

Essential 1999 Mazda B3000 Differentials

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.8RMK)

Differential Master Bearing Kit - Koyo

from

$126.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG&SL FORD MSTR 8.8
See More

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Taper Bearing Cup

from

$7.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Trac Loc Spring For Ford 7.5" (Part No.33514)

Trac Loc Spring For Ford 7.5"

from

$67.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 in

Product Features:
  • Trac Loc spring
  • Fits Ford 7.5″
See More

Powertrax – Lock Right Locker (Part No.1830-LR)

Lock Right Locker

from

$444.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Dorman – Differential Clutch Kit (Part No.697-780)

    Differential Clutch Kit

    from

    $262.99
    This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

    Product Features:
    • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
    • Quality materials – all components are built for reliable longevity and performance.
    • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
    • Trustworthy quality – backed by team of designers and engineers in the United States
    See More

    Pro-King – Differential Cross Shaft (Part No.742G930)

    Differential Cross Shaft

    from

    $2.79
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

    from

    $9.99
    5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

    Product Features:
    • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
    • 1/2″ head
    See More

    Yukon Gear – Bearing Race Driver (Part No.56015)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits HM88610 race
    • All steel construction
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)

    Tapered Roller Bearing

    from

    $6.29
    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

    8.5" & 8.2" GM Carrier Installation Kit

    from

    $109.99
    Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

    Product Features:
    • Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
    • Includes carrier bearings and races and “super” carrier shim kit
    See More

    Pro-King – Differential Pinion Shim Kit (Part No.742G200A)

    Differential Pinion Shim Kit

    from

    $18.49
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Pinion Seal For 7.5", 8.8", And 9.75" Ford, And Also 1985-’86 9" Ford (Part No.30037)

    Pinion Seal For 7.5", 8.8", And 9.75" Ford, And Also 1985-'86 9" Ford

    from

    $8.99
    Pinion seal for 7.5″, 8.8″, and 9.75″ Ford, and also 1985-’86 9″ Ford.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits Ford 7.5″, 8.8″ and some 9.75″
    • 2.785″ O.D.
    See More

    Motive Gear – Differential Gear Install Kit (Part No.F7.5IK)

    Differential Gear Install Kit

    from

    $35.49


    Product Features:
    • MINI INSTALL KIT FORD 7.5
    See More

    Yukon Gear – Minor Install Kit For Ford 7.5" Differential (Part No.12033)

    Minor Install Kit For Ford 7.5" Differential

    from

    $55.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

    Product Features:
    • Fits Ford 7.5″
    • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
    See More

    Yukon Gear – Tracloc Clutch Set (Two Sides) For 7.5" Ford (Part No.16013)

    Tracloc Clutch Set (Two Sides) For 7.5" Ford

    from

    $264.99
    TracLoc clutch set (two sides) for 7.5″ Ford.

    Product Features:
    • Clutch kit
    • Fit Ford 7.5″ Trac Loc positraction
    See More

    Pro-King – Differential Internal Nest Kit (Part No.762B717)

    Differential Internal Nest Kit

    from

    $239.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    National – Bearings (Part No.M86610)

    Bearings

    from

    $9.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Pinion Install Kit For Ford 7.5" Differential (Part No.13039)

    Pinion Install Kit For Ford 7.5" Differential

    from

    $184.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits Ford 7.5″
    • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – Standard Open Carrier Case & Spiders, Ford 8.8", 31 Spline (Part No.20070)

    Standard Open Carrier Case & Spiders, Ford 8.8", 31 Spline

    from

    $404.99
    Product Features:
    • Standard open carrier case and spiders
    • Fits Ford 8.8″ with 31 spline axles
    See More

    Yukon Gear – Pinion Nut (Part No.33154)

    Pinion Nut

    from

    $7.99
    Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

    Product Features:
    • Pinion nut for Ford 7.5″, 8″ and 9″
    • 3/4″ x 20 thread
    • 1 1/6″ socket
    See More

    Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

    Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

    from

    $59.99
    Product Features:
    • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
    • Interlocking design makes installation much easier
    See More

    Yukon Gear – 7.5" Ford Cover Gasket (Part No.23009)

    7.5" Ford Cover Gasket

    from

    $9.99
    7.5″ Ford cover gasket.

    Product Features:
    • Cover gasket
    • Fits Ford 7.5″
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $10.49


    Product Features:
    • SOLID SPACER FORD 8.8″ & 9″
    See More

    Pro-King – Differential Crush Sleeve (Part No.761A034)

    Differential Crush Sleeve

    from

    $2.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-532)

    Differential Pinion Yoke Assembly

    from

    $176.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Yukon Gear – Forged Yoke For Ford 8.8" With A 1350 U/Joint Size (Part No.41051)

    Forged Yoke For Ford 8.8" With A 1350 U/Joint Size

    from

    $246.99
    Yukon forged yoke for Ford 8.8″ with a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Ford 8.8″
    • 30 spline
    • 1350 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • U-bolt style
    See More

    Yukon Gear – Flange Yoke For Ford 7.5" Passenger And Truck (4.3" Od) (Part No.41045)

    Flange Yoke For Ford 7.5" Passenger And Truck (4.3" Od)

    from

    $314.99
    Yukon flange yoke for Ford 7.5″ passenger and truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Ford 7.5″
    • 28 spline
    • Round companion flange
    • 4.3″ O.D.
    See More

    1999 Mazda B3000 Differentials

    Maybe you’re in the middle of a full rebuild of that 1999 Mazda B3000. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 207 different Differentials in our inventory ranging from $0.99 to $2,064.99. That means you can find the exact parts or products you need to keep that 1999 Mazda B3000 running smoothly.

    Differentials are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 1999 Mazda B3000. Yukon Gear, Dorman, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1999 Mazda B3000, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 150 reviews in this category, some of the top rated parts include Differential Master Bearing Kit – Timken with 4.0 stars and Differential Carrier Shim Kit with 2.7 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1999 Mazda B3000 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1999 Mazda B3000 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 Mazda B3000 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your B3000 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Powertrax Differentials

    We carry Powertrax parts in our stock across Complete Differentials categories, plus more. For a 1999 Mazda B3000, our most popular Powertrax Differentials include:
    Lock Right Locker
    from $444.99
    (1)
    Lock Right Locker
    Complete Differentials

    Top 1999 Mazda B3000 Differentials from Dorman

    Dorman products are another trusted brand when it comes to Differentials for your 1999 Mazda B3000. Popular Dorman parts include:
    Rear Differential Cover
    from $34.99
    (34)
    Rear Differential Cover
    Differential Covers
    Differential Cover
    from $52.99
    (2)
    Differential Cover
    Differential Covers

    FAQs for 1999 Mazda B3000 Differentials

    What are the most purchased Differentials for the 1999 Mazda B3000?

    Out of 207 Differentials for the 1999 Mazda B3000, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $23.99
    (7)
    Bearings
    Front Differential Pinion Bearings
    Differential Cover Gasket
    from $6.49
    (13)
    Differential Cover Gasket
    Rear Differential Cover Gaskets

    What are the top-rated 1999 Mazda B3000 Differentials?

    Top-rated Differentials for your 1999 Mazda B3000 based on customer reviews/ratings are:
    Differential Master Bearing Kit - Timken
    from $137.99
    (8)
    Differential Master Bearing Kit – Timken
    “These Timken bearings work great in my 10 second drag car.”
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    “worked great”
    Differential Master Bearing Kit - Koyo
    from $126.99
    (2)
    Differential Master Bearing Kit – Koyo
    “Nice kit for the money.”