1999 Kenworth K100E V-Belts

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

• Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
• Engineered to help address noise issues caused by the belt drive 
• Capable of handling more extreme temperatures and workloads

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stress, especially on small-diameter pulleys, while dissipating heat.
• High modulus, high strength tensile cord
• Oil and heat resistant construction
• Meets SAE J636b and SAE J637 specifications
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes are available as Gates PowerBand V-Belts

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Proprietary material provides maximum performance at extremely long operating temperatures
• Construction that resists cracking, wear, oil and heat
• The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
• Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
• Problem solver for failed disks
• Engineered to save your fleet money and reduce downtime
• Meets RMA standards for oil and heat resistance and static conductivity requirements

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• The patented material provides optimal performance at extremely high operating temperatures.
• Construction that resists cracking, wear, oil and heat
• A special compound ensures unmatched stability, load capacity and belt life.
• Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
• Problem solver for failed disks
• Engineered to save your fleet money and reduce downtime
• Meets RMA oil and heat resistant standards and static conductivity requirements

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stresses, especially on small-diameter pulleys, while dissipating heat.
• High-modulus, high-strength pull cord
• Oil and heat-resistant construction throughout
• Meets SAE J636b and SAE J637 specifications
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes are available as Gates PowerBand V-Belts

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at extremely prolonged operating temperatures
• Construction that resists cracking, wear, oil and heat
• The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
• Unique notch pattern offers greater flexibility for smaller diameter pulleys
• Troubleshooter for troubled drives
• Engineered to save your fleet money and reduce downtime
• Meets RMA oil and heat resistance standards and static conductivity requirements

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
• Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

Designed for problem, heavy-duty, heavily vibrating applications requiring belt sets. Tie-band feature joining belts together ensures stability lacking in ordinary belt sets.

Product Features:

• Molded notches reduce bending stresses, especially on small-diameter pulleys, while dissipating heat.
• High modulus, high strength tensile cord
• Oil and heat-resistant construction throughout
• Meets SAE J636b and SAE J637 specifications
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes are available as Gates PowerBand V-Belts

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stresses, especially on small-diameter pulleys, while dissipating heat.
• High modulus, high strength tensile cord
• Oil and heat resistant construction
• Meets SAE J636b and SAE J637 specifications
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes available as Gates PowerBand joined V-belts

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
• High modulus, high strength tensile cord
• Oil and heat resistant construction
• Meets SAE J636b and SAE J637 specifications
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes are available as Gates PowerBand V-Belts

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Proprietary material provides maximum performance at extremely long operating temperatures
• Construction that resists cracking, wear, oil and heat
• Special compound provides unmatched stability, load carrying capacity and belt life
• Unique notch pattern offers greater flexibility for smaller diameter pulleys
• Troubleshooter for troubled drives
• Engineered to save your fleet money and reduce downtime
• Meets RMA oil and heat resistant standards and static conductivity requirements

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Proprietary material provides maximum performance at extremely long operating temperatures
• Heavy-duty construction resists cracking, wear, oil and heat
• The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
• Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
• Problem solver for failed disks
• Designed to save your fleet’s money and reduce downtime
• Meets RMA oil and heat resistant standards and static conductivity requirements

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
• The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather, and decay to improve belt life
• Meets or exceeds SAE J636C specifications

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
• The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
• Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
• The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
• Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
• Resistant to oil, heat, ozone, weathering, and aging for better belt life.
• Meets or exceeds SAE J636C specifications

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
• The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
• Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather, and decay to improve belt life
• Meets or exceeds SAE J636C specifications