1999 Jeep Wrangler Bodies and Fender Parts

Essential 1999 Jeep Wrangler Bodies and Fender Parts

Omix – Screw; Spare Tire Ca (Part No.17258.09)

Screw; Spare Tire Ca

from

$2.29
Screw; Spare Tire Ca

Rugged Ridge – XHD Corner Guard; Re (Part No.11615.21)

XHD Corner Guard; Re

from

$399.99
XHD Corner Guard; Re

Crown Auto Jeep Replacmnt – Grille Mount And Rear Body Mount Bolt, Single (Part No.J4007570)

Grille Mount And Rear Body Mount Bolt, Single

from

$10.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

aFe POWER – Sway-A-Way Bump Stop (Part No.401-5200-05)

Sway-A-Way Bump Stop

from

$661.99
aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement bump stops for the 2007-2016 Jeep Wrangler (JK). These 2.0″ diameter bump stops feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will conveniently mount within the front coil springs on your daily driven vehicle. This kit offers extra bottom out protection for unexpected situations. These front bumps stops are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and works with any size lift kit.

Product Features:
  • CNC Machined Components Made To The Strictest Tolerances
  • 1 3/8 Polished Chrome Steel Shaft
  • Nitrogen over Hydraulic Damping
  • Fully Synthetic Shock Oil
See More

Omix – Spare Tire Carrier B (Part No.11503.93)

Spare Tire Carrier B

from

$23.49
Spare Tire Carrier B

Dorman – Body Mount Channel Repair (Part No.999-988)

Body Mount Channel Repair

from

$74.99
This floor support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Saves time – this floor channel repair kit installs in place over the damaged section of the bodywork without the need to fabricate a repair piece
  • Ready to install – this repair panel is pre-formed for a precise fit and is finished in weldable primer for a clean installation
  • Application specific – made to match the dimensions and material for certain Jeep Wrangler application
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Omix – Pinion Washer (Part No.16584.06)

Pinion Washer

from

$6.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Dorman – Interior Panel Retai (Part No.O6125962213DOR)

Interior Panel Retai

from

$2.46
Interior Panel Retai

Omix – Rivet; Fender Liner; (Part No.11620.60)

Rivet; Fender Liner;

from

$5.99
Rivet; Fender Liner;

Rugged Ridge – Tire Carrier Recovery Bag (Part No.12801.50)

Tire Carrier Recovery Bag

from

$127.99
The TCR bag has been designed to mount to Rugged Ridge RRC, XHD and Classic rear tire carrier bumpers. This bag allows the storage of all your recovery gear between the A-frame uprights on your rear tire carrier. Constructed of weather resistant material

Product Features:
  • Textured Black
See More

TrailFX – 4"Oval Straight, Polished, Ss, With Step Pad/Welded End Cap, Rocker Panel Mount (Part No.A1545S)

4"Oval Straight, Polished, Ss, With Step Pad/Welded End Cap, Rocker Panel Mount

from

$431.99
TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:
  • Rocker Panel Mount
  • T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
  • Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
  • Oval Step Shape Offers A Wider Stepping Area For Secure Footing
  • Provides Moderate Protection Against Road Hazards And Debris
See More

Crown Auto Jeep Replacmnt – OE Replacement (Part No.55175042K)

OE Replacement

from

$78.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)

11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On

from

$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Classic Diamond Style Design
  • Protected By A BriteGard Powder Coat Finish
  • Compliment Brite-Tread Running Boards
See More

KAI – Fender Flare (Part No.LKQ3260337)

Fender Flare

from

$57.99
New Standard Replacement Driver Side Rear Fender Flare, Textured Black

Product Features:
  • Textured Black, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Crown Auto Jeep Replacmnt – Black, Plastic, Single (Part No.55007316)

Black, Plastic, Single

from

$14.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Plastic Construction
  • Meets Quality Standards
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy To Install
See More

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52001961)

OE Replacement

from

$7.99
Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Rugged Ridge – FndrFlareHdwKt (Part No.11640.30)

FndrFlareHdwKt

from

$841.99
FndrFlareHdwKt

Dorman – Chassis Frame Repair Kit (Part No.523-282)

Chassis Frame Repair Kit

from

$269.99
This frame repair kit offers a cost-effective way to repair a rusted or damaged chassis frame, rather than replacing the entire frame.

Product Features:
  • Cost-effective fix – this chassis frame repair kit allows you to replace a rusted frame section
  • Improved design – re-engineered with improved drainage to prevent future corrosion buildup
  • Durably engineered – built with heavy-gauge steel and finished in weldable primer to resist future corrosion
  • Direct fit – includes all OE hardware mounting positions for complete installation
See More

Energy Suspension – Body Cab Mount Set (Part No.2.4105R)

Body Cab Mount Set

from

$111.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Le Bra – Custom Front End Cover (Part No.551633-01)

Custom Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Westin – Tube Fenders (Part No.62-1035)

Tube Fenders

from

$497.99
Westin Snyper Tubular Rear Fenders are made to protect from flying debris and provide a high clearance for Jeeps riding on large tires. Made of textured black powder coated 14 gauge 4 7/8 in. wide steel with a 1.5 diameter welded fender tube. Fenders feature a welded lip design to keep plastic inner fender in place. Fender welt is included for a finished look. All needed installation hardware is included with this bolt-on no drill installation. Sold in pairs. Front Snyper Tubular Front Fenders available sold separately.

Product Features:
  • Protect From Flying Debris
  • High Clearance For Jeeps With Large Tires
  • Made Of 14 Gauge Steel
  • 4 7/8 In. Wide Fender
  • 1.5 in. Diameter Tube
  • Mating Seam Is Silicone Sealed To Prevent Rust
  • Welded Lip Design Keeps Plastic Inner Fender In Place
  • Fender Welt Included For A Finished Look
  • Sold In Pairs
  • Hardware Included
See More

Omix – Hard Top Windshield Corner Seal (Part No.12304.05)

Hard Top Windshield Corner Seal

from

$13.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Rubber
  • Left Side
See More

BOLT – Jeep Spare Tire Lock (Part No.5922986)

Jeep Spare Tire Lock

from

$46.99
Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.
See More

KAI – Floor Brace (Part No.RRP2881)

Floor Brace

from

$321.99
New Standard Replacement Driver Side Floor Brace, 53 X 13 X 6

Product Features:
  • 53 X 13 X 6, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rugged Ridge – RRC; Spare Tire Carrier (Part No.11503.60)

RRC; Spare Tire Carrier

from

$328.99
This black RRC rear bumper tire carrier has a frame mounted platform that features a heavy duty grid like system with raised sides for the ultimate protection and greatest ground clearance. Features 5X 4.5 bolt pattern. All RRC rear bumpers feature a rein

Product Features:
  • Black
See More

Rugged Ridge – Body Armor; Rocker Side Panel Kit (Part No.11650.05)

Body Armor; Rocker Side Panel Kit

from

$129.99
Get that offroad look with Rugged Ridge Body Armor! Each Body Armor piece is constructed of black diamond plate looking UV treated thermoplastic for the coolest, toughest looking up-grade for your Jeep. Each body armor attaches to your Jeep with ultra str

Product Features:
  • Black Diamond Plate Thermoplastic
  • UV Treated
  • Attaches w/ Automotive Grade Double Sided Tape
  • Covers Typical Scratched and Dented Areas
  • Limited 5 Year Warranty
See More

Rampage – Tire Cover, Black, 27-29 in. (Part No.772901)

Tire Cover, Black, 27-29 in.

from

$17.99
Protect your spare tire from sun’s rays with this heavy-duty Spare Tire Cover, available in a wide range of colors and sizes to suit your needs.

Product Features:
  • Protects Spare Tire From Suns Rays
  • Heavy Duty Denim Soft Top Material
  • Elastic Strap to Insure Snug Fit
See More

1999 Jeep Wrangler Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1999 Jeep Wrangler. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 88 different Bodies and Fender Parts in our inventory ranging from $1.99 to $841.99. That means you can find the exact parts or products you need to keep that 1999 Jeep Wrangler running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1999 Jeep Wrangler. Crown Auto Jeep Replacmnt, Dorman, and Dee Zee are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1999 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1999 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1999 Jeep Wrangler Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular Rugged Ridge Bodies and Fender Parts

We carry Rugged Ridge parts in our stock across Rocker Panel Guards categories, plus more. For a 1999 Jeep Wrangler, our most popular Rugged Ridge Bodies and Fender Parts include:
Body Armor; Rocker Side Panel Kit
from $129.99
(1)
Body Armor; Rocker Side Panel Kit
Rocker Panel Guards

FAQs for 1999 Jeep Wrangler Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1999 Jeep Wrangler?

Out of 88 Bodies and Fender Parts for the 1999 Jeep Wrangler, the most popular in our inventory are:
OE Replacement
from $7.99
This product is not rated
OE Replacement
Body Mount Brackets
Front Position Control Arm Bumper
from $31.99
This product is not rated
Front Position Control Arm Bumper
Shock Bumpers
Body Mount Bolt, Left or Right Front
from $11.99
This product is not rated
Body Mount Bolt, Left or Right Front
Body Bolts