1999 Jeep Cherokee Suspension Parts
Find Your Specific 1999 Jeep Cherokee Suspension Parts
Below you will find various in-demand Jeep Suspension Parts, components and accessories for your 1999 Cherokee. Advance Auto Parts has popular Cherokee parts like Control Arms, Coil and Leaf Springs, Air Suspension and Kits and more. You’ll also find aftermarket and OEM Suspension Parts for other Cherokee model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 1999 Jeep Cherokee Suspension Parts below and start saving instantly.
Popular 1999 Jeep Cherokee Suspension Parts Categories
Essential Suspension Parts for 1999 Jeep Cherokees
Dorman – Control Arm Axle Bracket (OE Fix) (Part No.926-074)
from
$45.99
When a control arm bracket on certain Jeep Wrangler, Cherokee and Grand Cherokee SUVs bends or fails from rust or impact, the usual repair options are either a trip to the salvage yard to hunt for a used bracket or an entire new axle assembly from the dealer. Our Dorman OE FIX solution offers a much more affordable repair alternative that allows the replacement of just the damaged bracket, restoring this critical pivot point for the control arm. The front lower right bracket is constructed from rugged heavy-gauge steel and is designed to be welded into place after the removal of the original equipment bracket and proper surface preparation. It comes complete with an alignment/mounting bolt and eccentric washers for a seamless, secure fit and performance that is engineered for greater resistance to damage than the factory bracket.
Product Features:
See More
Product Features:
- Cost-effective – this front lower right control arm bracket allows the replacement of just the damaged bracket on specified Jeep SUVs, saving the expense of replacing the axle assembly.
- Saves time – skip the trip to the salvage yard or the dealer; just weld this replacement bracket into place after proper preparation for an effective, labor-saving repair
- Complete solution – constructed from heavy gauge steel and includes alignment/mounting bolt and eccentric washers for a seamless, secure fit and greater resistance to damage than the factory bracket
- Direct replacement – precision-engineered and manufactured to restore this critical pivot point for the control arm
Dorman – STRUT BELLOWS (Part No.540-206)
from
$29.99
STRUT BELLOWS
RT Offroad – Suspension Control Arm Mount: Control Arm Bracket Set, Left and Right Front Lower, Axle Side (Part No.RT21015)
from
$65.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge.
Product Features:
See More
Product Features:
- Heavy Duty Replacement For The Failure Prone Factory Mounts
- Plated Steel Construction Will Ensure Long Lasting Performance Even With The Most Rigorous Off Road Use
- Slotted Cam Bolt Design Will Allow You To Dial In The Front Caster and Improve Overall Ride Quality
Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)
from
$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Energy Suspension – Hyper-Flex System (Part No.2.18105R)
from
$211.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Rare Parts – Shackle Assembly (Part No.RP35115)
from
$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with shackle plates and bushings
- No Squeak
- Rubber or Heat Treated bushings
- Restores ride height
Skyjacker – Hydraulic, Twin Tube, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.B8563)
from
$87.99
The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.
Product Features:
See More
Product Features:
- Twin Tube Construction
- Advanced Foam-Cell Technology
- Vehicle Specific Multi-Stage Valving
- Increased Fluid Capacity For MAX Heat Dissipation
- 360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
- Chrome Plated Shaft And Sintered Iron Piston
- Comes With Black Boot
Crown Auto Jeep Replacmnt – Oem Replacement, Single (Part No.52001125)
from
$84.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – Polyurethane, Single (Part No.52004295)
from
$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Foam Construction
- Meets Quality Standards
- Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
- Easy To Install
MOOG – Front Upper Suspension Control Arm (Part No.RK640331)
from
$60.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
Monroe – Max-Air Air Adjustable Air Shock Absorber, Pack of 2 (Part No.MA765)
from
$151.99
Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
- EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Crown Auto Jeep Replacmnt – No Lift, 4 Leaves, Single Spring (Part No.4886185AA)
from
$159.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Rear 4-Leaf Heavy-Duty Leaf Spring
- Easy To Install
Rugged Ridge – Frame Shackle Bushing (Part No.18366.04)
from
$47.99
This pair of red polyurethane rear frame shackle bushings from Prothane provides better handling and control of your Wrangler. They are made of polyurethane which is a stronger replacement than rubber and lasts for as long as you need it!
Product Features:
See More
Product Features:
- Polyurethane
- Higher Level of Performance
- Better Handling and Control
- Long-lasting
- Limited 5 Year Warranty
Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34904)
from
$54.99
Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.
Product Features:
See More
Product Features:
- DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
- BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
- CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Energy Suspension – Shackle Bushing Set (Part No.2.2111G)
Omix – Rear Axle Snubber; 84-01 Jeep Cherokee XJ (Part No.18280.09)
from
$38.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Left Or Right
- OE Style
- Direct Fit
Crown Auto Jeep Replacmnt – Rubber, Black (Part No.J3216638)
from
$1.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Crown Auto Jeep Replacmnt – 6 Point, 12 Millimeter X 1.75 Thread, Zinc Coated, Steel, Single (Part No.6502697)
from
$1.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.53000899)
from
$11.99
Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Long-Lasting, Durable Crown Automotive Products
- Hazardous Free Material
- Offers OE Fit And Function
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
Rancho – Suspension Control Arm Kit (Part No.RS66160B)
from
$321.99
Product Features:
See More
- COMPATIBILITY: Designed for stock and lifted (up to 4-in.) Jeep Wrangler TJ and Cherokee XJ
- MAINTENANCE-FREE BUSHINGS: Features Rancho’s D2 high-articulation, grease-free, self-centering bushings that have a PTFE liner in the internal bushing that serves as a lubricating agent for long-lasting, maintenance-free operation
- IMPROVES RIDE: Reduces noise, vibration and harshness for improved ride quality
- ADJUSTABLE: Allows adjustment of caster and pinion angles
- RESISTS CORROSION: Durable black powder-coat finish resists rust and corrosion
- ENGINEERED TO LAST: 1.25-In. OD diameter bar upper arms made of heavy-duty 0.188-in. DOM wall tubing with forged ends for long life
- EASY TO INSTALL: Includes two preassembled control arms for easy installation
- BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty
Crown Auto Jeep Replacmnt – Black, Rubber (Part No.52000229)
from
$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.52001122)
from
$86.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Energy Suspension – Control Arm Bushing Set (Part No.2.3102R)
from
$114.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Rare Parts – Control Arm Bushing (Part No.RP15005)
from
$44.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK18)
from
$46.99
Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Whiteline – Spring Pad Bushing (Part No.W73445)
from
$12.99
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Whiteline – Spring Pad Bushing (Part No.W73415)
from
$18.99
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Upgrade your 1999 Jeep Cherokee with Top-Quality Suspension Parts
When it comes to maintaining or upgrading your 1999 Jeep Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Suspension Parts are key to keeping your Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 109 Suspension Parts for the 1999 Jeep Cherokee, designed to meet your needs without breaking the bank.
From
Control Arm
replacements to
Coil and Leaf Springs
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1999 Jeep Cherokee at great prices.
Our Suspension Parts inventory for this model
ranges from just $1.99 to $431.99, with
an average price of $98.41.
Our 109 Suspension Parts in stock come from 17 trusted brands, so you’re sure to find the right part for your 1999 Jeep Cherokee without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Jeep Cherokee, we stock popular OEM and aftermarket Suspension Parts from top names
like Valvoline, Moog, Monroe, and more.
Valvoline Suspension Parts
start at just $12.99 and boast an impressive 4.8 stars average rating from customers.
Moog and Monroe also bring quality to the table, with Suspension Parts available starting at $30.49, and at an average 4.5 stars rating.
With 764 customer reviews and counting, our 1999 Jeep Cherokee Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1999 Jeep Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Cherokee in top shape, all in one place.
Start shopping confidently below for your 1999 Jeep Cherokee!
Best-Selling Control Arms for 1999 Jeep Cherokees
Enhance the driving experience in your Jeep with 34 quality Control Arm components, starting at $11.99.
MOOG – Suspension Control Arm Bushing Kit (Part No.K3128)
from
$30.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Metal rib design helps lock the inner tube within frame pocket
- Metal surfaces are phosphate coated for corrosion protection
MOOG – Front Upper Suspension Control Arm (Part No.RK640331)
from
$60.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
MOOG – Suspension Control Arm Bushing Kit (Part No.K3131)
from
$34.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Suspension Control Arm Bushing Kit (Part No.K3162)
from
$71.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Metal rib design helps lock the inner tube within frame pocket
- Metal surfaces are phosphate coated for corrosion protection
Crown Auto Jeep Replacmnt – Polyurethane, Single (Part No.52004295)
from
$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Foam Construction
- Meets Quality Standards
- Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
- Easy To Install
Carquest Premium – Suspension Control Arm (Part No.800-71849)
from
$81.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Suspension Control Arm (Part No.RK660203)
from
$78.99
Product Features:
See More
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
RT Offroad – Suspension Control Arm Mount: Control Arm Bracket Set, Left and Right Front Lower, Axle Side (Part No.RT21015)
from
$65.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge.
Product Features:
See More
Product Features:
- Heavy Duty Replacement For The Failure Prone Factory Mounts
- Plated Steel Construction Will Ensure Long Lasting Performance Even With The Most Rigorous Off Road Use
- Slotted Cam Bolt Design Will Allow You To Dial In The Front Caster and Improve Overall Ride Quality
Crown Auto Jeep Replacmnt – Fully Boxed, Steel, With Bushings (Part No.52087711)
from
$47.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
MOOG – Suspension Control Arm Bushing Kit (Part No.K7419)
from
$36.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Crown Auto Jeep Replacmnt – Black, Rubber (Part No.52087709)
from
$12.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Crown Auto Jeep Replacmnt – Fully Boxed, Steel, With Bushings (Part No.52001162)
from
$54.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Dorman – Suspension Control Arm (Part No.521-107)
from
$64.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rugged Ridge – Control Arm Bushing (Part No.18362.50)
from
$15.49
This single polyurethane control arm bushing from Rugged Ridge helps to reduce vibration and allows you to maintain better alignment while driving.
Product Features:
See More
Product Features:
- Polyurethane
- OE Style
- Better Handling and Control
- Long-lasting
- Limited 5 Year Warranty
Energy Suspension – Control Arm Bushing Set (Part No.2.3105R)
from
$57.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Rancho – Suspension Control Arm Kit (Part No.RS66161B)
from
$362.99
Product Features:
See More
- COMPATIBILITY: Designed for stock and lifted (up to 4-in.) Jeep Wrangler TJ and Cherokee XJ
- MAINTENANCE-FREE BUSHINGS: Features Rancho’s D2 high-articulation, grease-free, self-centering bushings that have a PTFE liner in the internal bushing that serves as a lubricating agent for long-lasting, maintenance-free operation
- IMPROVES RIDE: Reduces noise, vibration and harshness for improved ride quality
- ADJUSTABLE: Allows adjustment of caster and pinion angles
- ACCOMMODATES LARGER TIRES: Bent similar to factory design to accommodate larger wheels and tires
- RESISTS CORROSION: Durable black powder-coat finish resists rust and corrosion
- ENGINEERED TO LAST: 2-In. OD diameter bar lower arms made of heavy-duty 0.188-in. DOM wall tubing with forged ends for long life
- EASY TO INSTALL: Includes two preassembled control arms for easy installation
- BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty
Rancho – Suspension Control Arm Kit (Part No.RS66160B)
from
$321.99
Product Features:
See More
- COMPATIBILITY: Designed for stock and lifted (up to 4-in.) Jeep Wrangler TJ and Cherokee XJ
- MAINTENANCE-FREE BUSHINGS: Features Rancho’s D2 high-articulation, grease-free, self-centering bushings that have a PTFE liner in the internal bushing that serves as a lubricating agent for long-lasting, maintenance-free operation
- IMPROVES RIDE: Reduces noise, vibration and harshness for improved ride quality
- ADJUSTABLE: Allows adjustment of caster and pinion angles
- RESISTS CORROSION: Durable black powder-coat finish resists rust and corrosion
- ENGINEERED TO LAST: 1.25-In. OD diameter bar upper arms made of heavy-duty 0.188-in. DOM wall tubing with forged ends for long life
- EASY TO INSTALL: Includes two preassembled control arms for easy installation
- BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty
Rugged Ridge – Suspension Control Arm Bushing Kit; Front; Red; 84-01 Jeep Cherokee XJ (Part No.18362.01)
from
$254.99
This red front control arm bushing kit provides better handling and control of your Wrangler. Each bushing is made of polyurethane which is a stronger replacement than rubber and lasts for as long as you need it.
Product Features:
See More
Product Features:
- Polyurethane
- OE Style
- Better Handling and Control
- Long-lasting
Crown Auto Jeep Replacmnt – OE Replacement, Set Of 4 (Part No.CAK12)
from
$203.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Rare Parts – Control Arm Bushing (Part No.RP17063)
from
$149.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Rare Parts – Control Arm Bushing (Part No.RP17061)
from
$119.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Rare Parts – Control Arm (Part No.RP12217)
from
$109.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Rare Parts – Control Arm Bushing (Part No.RP18565)
from
$78.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Omix – Front Upper Control Arm; 97-06 Jeep Wrangler TJ (Part No.18280.01)
from
$77.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Includes Bushings
- Left Or Right Side
- OE Style
- Direct Fit
Most Popular 1999 Jeep Cherokee Coil and Leaf Springs
Customize your Jeep with 28 Coil and Leaf Springs products
like Leaf Spring Shackles,
Coil Spring Insulators, and
Coil Spring Sets, all
priced under $318.99.
Dorman – Position Leaf Spring Shackle Kit (Part No.722-024)
from
$108.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.
Product Features:
See More
Product Features:
- Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
- Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
- Excellent value – original equipment quality at a lower price
- Ready to install – all essential hardware is included for an easy installation
MOOG – Coil Spring Insulator (Part No.K160039)
from
$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
MOOG – Leaf Spring Bushing (Part No.SB371)
from
$25.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Omix – Rear Axle Snubber; 84-01 Jeep Cherokee XJ (Part No.18280.09)
from
$38.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Left Or Right
- OE Style
- Direct Fit
Dorman – Leaf Spring (Part No.929-301)
from
$190.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.
Product Features:
See More
Product Features:
- Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
Crown Auto Jeep Replacmnt – Oem Replacement, Single (Part No.52001125)
from
$84.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
MOOG – Leaf Spring Shackle (Part No.K150405)
from
$94.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Crown Auto Jeep Replacmnt – No Lift, 4 Leaves, Single Spring (Part No.4886186AA)
from
$181.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Energy Suspension – Coil Spring Isolator Set (Part No.2.6103G)
from
$53.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Lasts from 3 to 10 Times Longer
- Assemble to Chassis Same Way as OEM
- Maintains Factory Ride Characteristics
- Simple Way to Increase Vehicle Height
Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.52001122)
from
$86.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Omix – Rear HD Leaf Spring; 84-01 Jeep Cherokee XJ (Part No.18280.17)
from
$182.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Heavy Duty
- Stiffer Spring Rate Than OE
- Direct Fit
Rugged Ridge – Frame Shackle Bushing (Part No.18366.04)
from
$47.99
This pair of red polyurethane rear frame shackle bushings from Prothane provides better handling and control of your Wrangler. They are made of polyurethane which is a stronger replacement than rubber and lasts for as long as you need it!
Product Features:
See More
Product Features:
- Polyurethane
- Higher Level of Performance
- Better Handling and Control
- Long-lasting
- Limited 5 Year Warranty
Rugged Ridge – Leaf Spring Bushing (Part No.1-1007BL)
from
$146.99
This black rear leaf spring bushing kit provides better handling and control of your Wrangler for a better overall performance. They are made of polyurethane which is a stronger replacement than rubber and lasts for as long as you need it!
Product Features:
See More
Product Features:
- Black Polyurethane
- Better Handling and Control
- Higher Level of Performance
- Long-lasting
- Limited 5 Year Warranty
Dorman – Suspension Leaf Spring (Part No.97-547)
from
$318.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.
Product Features:
See More
Product Features:
- Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
Dorman – Suspension Leaf Spring (Part No.97-533)
from
$235.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.
Product Features:
See More
Product Features:
- Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
- Durable design – rigorously engineered and carefully manufactured to provide like-new feel and dependable service life
Crown Auto Jeep Replacmnt – Leaf Spring Assembly Left Or Right Rear 4-Leaf No Bushings (Part No.52000706AB)
from
$194.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Crown Auto Jeep Replacmnt – No Lift, 4 Leaf Heavy Duty, Single (Part No.52000707)
from
$185.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Crown Auto Jeep Replacmnt – No Lift, 4 Leaves, Single Spring (Part No.4886187AA)
from
$185.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Rear 4-Leaf Heavy-Duty Leaf Spring
- Easy To Install
Crown Auto Jeep Replacmnt – No Lift, 4 Leaves, Single Spring (Part No.4886185AA)
from
$159.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Rear 4-Leaf Heavy-Duty Leaf Spring
- Easy To Install
Rare Parts – Spring Bushing (Part No.RP37473)
from
$95.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Heat Treated bushings
- No Squeak
- Reduces vibration
Rare Parts – SPRING BSHG. (Part No.RP37474)
from
$50.99
SPRING BSHG.
Rare Parts – Coil Spring Insulator (Part No.RP46351)
from
$33.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Crown Auto Jeep Replacmnt – Polyurethane, Single, 2.9 Inch Height (Part No.52004297)
from
$32.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Foam Construction
- Meets Quality Standards
- Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
- Easy To Install
Whiteline – Spring Pad Bushing (Part No.W73415)
from
$18.99
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Top Picks for 1999 Jeep Cherokee Air Suspension and Kits
Upgrade Jeep Cherokees with top-quality Air Suspension and Kits parts, including 7 OEM and aftermarket selections for your 1999 model.
Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)
from
$12.99
Valvoline ATF for MERCON V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON SP, MERCON LV, MERCON ULV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON V, MERCON, DEXRON-III, DEXRON-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON or MERCON fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)
from
$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Monroe – Max-Air Air Adjustable Air Shock Absorber, Pack of 2 (Part No.MA765)
from
$151.99
Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
- EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK18)
from
$46.99
Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Energy Suspension – Hyper-Flex System (Part No.2.18105R)
from
$211.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)
from
$6.99
Max Performance Synthetic Power Steering Fluid
In-Demand Shocks and Struts for 1999 Jeep Cherokees
Select from 40 premium Shocks and Struts parts for your 1999 Jeep Cherokee, with prices ranging from $1.99 to $431.99.
Rancho – Suspension Shock Absorber RS5000X (Part No.RS55128)
from
$90.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Monroe – OESpectrum Suspension Shock Absorber (Part No.37027)
from
$87.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- 5/8-inch (15.9 mm) diameter piston rod (On most applications)
FOX Offroad Shocks – Suspension Shock Absorber: Hydraulic/Nitrogen Gas Charge, 24.95" H Extend/15.35" H Compress, Aluminum, Single (Part No.985-24-113)
from
$431.99
The aluminum bodied 2.0 Inch Performance Series Reservoir smooth body shock delivers FOX’s industry leading and race dominating performance in an affordable, hassle-free bolt on package. Its heat reducing design includes a metal impacted clear anodized aluminum shock body that dissipates heat faster than a conventional steel body shock. Its external reservoir allows for increase oil and nitrogen capacity while delivering striking race look. The included black anodized reservoir mounting clamp and other components are CNC machined from 6061-T6 aluminum. The race developed high flow damping piston matched with application specific valving provides the 2.0 Inch Performance Series Reservoir shock a predicable ride quality capable of handling the roughest road conditions.
Product Features:
See More
Product Features:
- Body 2.0 Inch Metal Impacted 6061-T6 Aluminum Will Resist Rust Over Time
- Body Plating: Clear-Anodized For A Durable Finish
- External Reservoir 2.0 Inch Smooth Bore 6061-T6 Aluminum Is Hard Anodized
- Black-Anodized, CNC-Machined 6061-T6 Billet Aluminum Components
- 5/8 Inch Hard Chrome Plated Heat-Treated Alloy Steel Shaft
- Race-Developed High-Flow Piston Design. Application Specific Valving To Maximize Performance
- JM92 Advanced Suspension Fluid For Improved Performance At Variable Temperatures
- Limited Warranty
Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59323)
from
$37.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Gas-Matic Suspension Shock Absorber (Part No.59015)
from
$47.99
Monroe Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic light trucks and vans
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – OESpectrum Suspension Shock Absorber (Part No.37083)
from
$93.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- 5/8-inch (15.9 mm) diameter piston rod (On most applications)
Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)
from
$26.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)
from
$24.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59331)
from
$70.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
MOOG – Leaf Spring Shackle Bushing (Part No.SB372)
from
$44.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rancho – Suspension Shock Absorber RS5000X (Part No.RS55239)
from
$99.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Rancho – Suspension Shock Absorber RS5000X (Part No.RS55129)
from
$79.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Skyjacker – Hydro Shock W/Red Boot (Part No.H7016)
from
$71.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead
Product Features:
See More
Product Features:
- Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
- Multi Stage Velocity Sensitive Valving
- Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
- Bonded Iron Piston For Durability And Longer Shock Life
- Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
- Orifice Disk For Axle Control In Any Condition
- Red Polyurethane Bushings
Skyjacker – Hydro Shock W/Red Boot (Part No.H7028)
from
$71.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead
Product Features:
See More
Product Features:
- Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
- Multi Stage Velocity Sensitive Valving
- Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
- Bonded Iron Piston For Durability And Longer Shock Life
- Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
- Orifice Disk For Axle Control In Any Condition
- Red Polyurethane Bushings
Skyjacker – Nitrogen Gas Charged, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.N8028)
from
$85.99
NITRO N8000 series shocks are recommended for full size vehicles and moderate to extreme off-road applications. Skyjacker(R) nitro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead
Product Features:
See More
Product Features:
- 150 PSI Pressurized Nitrogen Gas
- Multi Stage Velocity Sensitive Valving
- Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
- Bonded Iron Piston For Durability And Longer Shock Life
- Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
- Orifice Disk For Axle Control In Any Condition
- Red Polyurethane Bushings
Skyjacker – Hydraulic, Limited Lifetime Warranty, Non-Adjustable, Includes Dust Boot, Single (Part No.H7018)
from
$71.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead
Product Features:
See More
Product Features:
- Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
- Multi Stage Velocity Sensitive Valving
- Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
- Bonded Iron Piston For Durability And Longer Shock Life
- Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
- Orifice Disk For Axle Control In Any Condition
- Red Polyurethane Bushings
Skyjacker – Hydro Shock W/Red Boot (Part No.H7063)
from
$71.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead
Product Features:
See More
Product Features:
- Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
- Multi Stage Velocity Sensitive Valving
- Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
- Bonded Iron Piston For Durability And Longer Shock Life
- Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
- Orifice Disk For Axle Control In Any Condition
- Red Polyurethane Bushings
Skyjacker – Hydraulic, Twin Tube, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.B8518)
from
$87.99
The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.
Product Features:
See More
Product Features:
- Twin Tube Construction
- Advanced Foam-Cell Technology
- Vehicle Specific Multi-Stage Valving
- Increased Fluid Capacity For MAX Heat Dissipation
- 360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
- Chrome Plated Shaft And Sintered Iron Piston
- Comes With Black Boot
Rancho – Suspension Shock Absorber RS5000X (Part No.RS55245)
from
$79.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Skyjacker – Hydraulic, Limited Lifetime Warranty, Non-Adjustable, Includes Dust Boot, Single (Part No.H7025)
from
$71.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead
Product Features:
See More
Product Features:
- Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
- Multi Stage Velocity Sensitive Valving
- Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
- Bonded Iron Piston For Durability And Longer Shock Life
- Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
- Orifice Disk For Axle Control In Any Condition
- Red Polyurethane Bushings
Monroe – Magnum Severe Service Suspension Shock Absorber (Part No.550016)
from
$71.99
Engineered for hardworking emergency, municipal, fleet and jobsite vehicles, Monroe Magnum Severe Service shocks feature enhanced components for superior stability and ride control in the toughest environments.
Product Features:
See More
Product Features:
- ENGINEERED FOR EMERGENCY AND FLEET VEHICLES – For hardworking first responder, municipal, fleet and jobsite vehicles and features 10-stage valving that adjusts to road extremes to help handle frequent stops, heavy loads and high miles
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- STRONG AND DURABLE – Double welded, including arc welds up to 360-degrees, for durability while shouldered bushing and bonded bushing (on most applications) delivers quality
- BUILT TO LAST – Heavy-duty nitrocarburized rod (on most applications) and sintered iron piston enhance durability for longer service life
- LONGER SERVICE LIFE – Larger bore, bigger 2-in. reserve tube and 0.05-in. pressure tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- CONTROL AND DURABILITY – PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces for smooth operation
- .05-inch pressure tube withstanding pressure of 9KPSI – On most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
Skyjacker – Nitrogen Gas Charged Mono Tube, With External Reservoir, Non Adjustable, Single (Part No.A2063)
from
$321.99
Skyjacker was established in 1974. We grew from a one bay garage into an international manufacturing warehouse. Skyjacker continues to strive to stay ahead of the game in the aftermarket industry. Skyjacker builds quality suspension products. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Shock Absorbers Provides Comfortable And Safe Ride
- Meets The Quality Standards
- Easy Installation
Skyjacker – Nitrogen Gas Charged Mono Tube, With External Reservoir, Non Adjustable, Single (Part No.A2016)
from
$321.99
Skyjacker was established in 1974. We grew from a one bay garage into an international manufacturing warehouse. Skyjacker continues to strive to stay ahead of the game in the aftermarket industry. Skyjacker builds quality suspension products. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Shock Absorbers Provides Comfortable And Safe Ride
- Meets The Quality Standards
- Easy Installation
Skyjacker – Nitrogen Gas Charged Mono Tube, With External Reservoir, Non Adjustable, Single (Part No.A2028)
from
$321.99
Skyjacker was established in 1974. We grew from a one bay garage into an international manufacturing warehouse. Skyjacker continues to strive to stay ahead of the game in the aftermarket industry. Skyjacker builds quality suspension products. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Shock Absorbers Provides Comfortable And Safe Ride
- Meets The Quality Standards
- Easy Installation
Top-Rated Suspension Parts Brands For Your 1999 Jeep Cherokee
Shop for the best-rated brands offering Suspension Parts and other products for your 1999 Jeep Cherokees. Below you’ll find some of our best rated Suspension Parts from Valvoline, Moog, and Monroe, and more. Suspension Parts from these brands that fit a 1999 Cherokee start at just $12.99 and are rated as high as 4.8 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 1999 Jeep Cherokee Suspension Parts
When it comes to maintaining or upgrading your 1999 Jeep Cherokee, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1999 Jeep Cherokee. With over 2 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $24.49. Plus, with over 137 customer reviews and an average rating of 4.8 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Moog 1999 Jeep Cherokee Suspension Parts
Moog auto parts is one of the highest quality Suspension Part brands in the market. Any 1999 Jeep Cherokee owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1999 Cherokee, Advance Auto Parts carries a full inventory of 3 Moog Suspension Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Moog Suspension Parts range from $30.49 to $60.99, plus, with more than 5 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.
FAQs for 1999 Jeep Cherokee Suspension Parts
Which Suspension Parts are best-sellers for 1999 Jeep Cherokees?
Out of 109 Suspension Parts that fit 1999 Jeep Cherokees, the following parts are the top sellers:
- ATF for Mercon®V Applications Conventional, 1 Quart (12079140) – $12.99
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Gas-Matic Suspension Shock Absorber (5530013) – $47.99
What’s the price range for 1999 Jeep Cherokee Suspension Parts?
Suspension Part prices for the 1999 Jeep Cherokee start at $1.99 and go up to $431.99 for the most premium parts.
What’s the average price of a Suspension Part for a 1999 Jeep Cherokee?
The average price for Suspension Parts for the 1999 Jeep Cherokee is $98.41. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Suspension Parts for other Jeep Cherokee model years?
What are the cheapest Suspension Parts for my 1999 Jeep Cherokee?
The cheapest 1999 Jeep Cherokee Suspension Parts we carry in stock are:
- 6 Point, 12 Millimeter X 1.75 Thread, Zinc Coated, Steel, Single (50074759) – $1.99
- Rubber, Black (50074481) – $1.99
- Rubber, Black (50074744) – $2.99
- Max Performance Synthetic Power Steering Fluid (11150908) – $6.99
- Polyurethane, Single (11740885) – $11.99
What are the top-rated Suspension Parts that fit the 1999 Jeep Cherokee?
Out of 764 reviews by customers, our 1999 Jeep Cherokee Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1999 Jeep Cherokee and their top-rated products:
- Coil and Leaf Springs
- Position Leaf Spring Shackle Kit (10309794) – $108.99
- Coil Spring Insulator (21880668) – $30.49
- Leaf Spring Bushing (20519682) – $25.99
- Shocks and Struts
- Position Leaf Spring Shackle Kit (10309794) – $108.99
- Coil Spring Insulator (21880668) – $30.49
- Leaf Spring Bushing (20519682) – $25.99
- Control Arms
- Position Leaf Spring Shackle Kit (10309794) – $108.99
- Coil Spring Insulator (21880668) – $30.49
- Leaf Spring Bushing (20519682) – $25.99
What types of Suspension Parts do you sell for my 1999 Jeep Cherokee?
As of 11/2/25, these are some of the most in-demand types of Suspension Parts for a 1999 Jeep Cherokee:
Can I get help with 1999 Jeep Cherokee Suspension Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Suspension Parts and more.
What is your return policy for Jeep Cherokee Suspension Parts?
Advance Auto Parts keeps returns simple. For new Jeep Cherokee Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
