1999 International 9800 SBA Belts and Hoses

Below you will find various in-demand International Belts and Hoses, components and accessories for your 1999 9800 SBA. Advance Auto Parts has popular 9800 SBA parts like Radiator Hoses, Pulleys, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other 9800 SBA model years including 1996, 1997, 1998 and more. Select a category of 1999 International 9800 SBA Belts and Hoses below and start saving instantly.

Popular 1999 International 9800 SBA Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Coolant Hoses

V-Belts

Essential Belts and Hoses for 1999 International 9800 SBAs

from

$54.99

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:

Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
Premium OE technology to ensure peak performance under extreme conditions
Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
Meets or exceeds OE quality

from

$33.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$42.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$46.99

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$12.99

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$96.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$45.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$218.99

Product Features:

Optimized components engineered for maximum strength and durability
Patented design provides superior belt alignment and tension for improved drive efficiency and life
Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
Double row bearings carry more load and last up to 3X longer than two individual bearings
Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components

from

$142.99

Dayco No Slack Automatic Belt Tensioners are built to outperform and outlast competitive OE parts. This specific Dayco Automatic Belt Tensioner is manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension. The heavy duty cast aluminum spring case resists cracking and fatigue. Each component is built to resist rust, endure the toughest of conditions while promoting quieter performance and longer life.

Product Features:

Manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension
The heavy duty cast aluminum spring case resists cracking and fatigue
Includes installation instructions
Rust resistant construction

from

$161.99

This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for International applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty steel pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$62.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$52.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$50.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$16.79

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$14.29

Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$20.29

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$7.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$32.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$17.99

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$22.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

Upgrade your 1999 International 9800 SBA with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1999 International 9800 SBA, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your International or enhancing its overall performance, Belts and Hoses are key to keeping your 9800 SBA functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Belts and Hoses for the 1999 International 9800 SBA, designed to meet your needs without breaking the bank. From Radiator Hose replacements to Pulleys upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1999 International 9800 SBA at great prices. Our Belts and Hoses inventory for this model ranges from just $4.99 to $142.99, with an average price of $34.40. Our 35 Belts and Hoses in stock come from 3 trusted brands, so you’re sure to find the right part for your 1999 International 9800 SBA without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 International 9800 SBA, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Driveworks, Gates, and more. Dayco Belts and Hoses start at just $14.29 and boast an impressive 5 stars average rating from customers. Driveworks and Gates also bring quality to the table, with Belts and Hoses available starting at $4.99, and at an average 4 stars rating. With 77 customer reviews and counting, our 1999 International 9800 SBA Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1999 International 9800 SBA is always ready to roll. We’re committed to providing you with everything you need to keep your 9800 SBA in top shape, all in one place. Start shopping confidently below for your 1999 International 9800 SBA!

Best-Selling Radiator Hoses for 1999 International 9800 SBAs

Enhance the driving experience in your International with 2 quality Radiator Hose components, starting at $21.49.

show more show less

from

$22.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

Top Picks for 1999 International 9800 SBA Belt Tensioners

Upgrade International 9800 SBAs with top-quality Belt Tensioners parts, including 1 OEM and aftermarket selections for your 1999 model.

show more show less

from

$142.99

Manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension
The heavy duty cast aluminum spring case resists cracking and fatigue
Includes installation instructions
Rust resistant construction

In-Demand Serpentine and V Belts for 1999 International 9800 SBAs

Select from 31 premium Serpentine and V Belts parts for your 1999 International 9800 SBA, with prices ranging from $4.99 to $96.99.

show more show less

from

$30.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$29.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber.
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$16.79

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$12.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$21.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$33.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$24.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$14.29

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$52.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$25.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$17.49

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$28.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$17.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$21.29

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$23.99

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$96.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$62.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$34.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$58.99

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$46.99

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$37.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$45.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$41.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$40.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$34.99

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$32.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$24.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$20.29

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$10.39

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$7.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

Top-Rated Belts and Hoses Brands For Your 1999 International 9800 SBA

Shop for the best-rated brands offering Belts and Hoses and other products for your 1999 International 9800 SBAs. Below you’ll find some of our best rated Belts and Hoses from Dayco, Driveworks, and Gates, and more. Belts and Hoses from these brands that fit a 1999 9800 SBA start at just $4.99 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1999 International 9800 SBA Belts and Hoses

When it comes to maintaining or upgrading your 1999 International 9800 SBA, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1999 International 9800 SBA. With over 17 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.29, with an average price of just $35.68. Plus, with over 54 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$28.49

This product is not rated

Poly Rib Belt Serpentine Belt; 41.34 Long, 5 Rib Count

“”

from
$17.49

This product is not rated

Bottom Cog V-Belt; 46 Inch Long, Exact Fit Premium Quality

“”

from
$25.99

This product is not rated

Poly Rib Belt Serpentine Belt; 42.52 Long, 6 Rib Count

“”

Popular Driveworks 1999 International 9800 SBA Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1999 International 9800 SBA owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1999 9800 SBA, Advance Auto Parts carries a full inventory of 7 Driveworks Belts and Hoses. Plus you will be keeping your International in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $4.99 to $29.99, plus, with more than 21 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$10.39

This product is not rated

Automotive V-Belt, Driveworks

“”

from
$17.79

This product is not rated

Poly Rib Belt Serpentine Belt; 42.52 Long, 6 Rib Count

“”

from
$7.99

This product is not rated

Automotive V-Belt

“”

FAQs for 1999 International 9800 SBA Belts and Hoses

Which Belts and Hoses are best-sellers for 1999 International 9800 SBAs?

Out of 35 Belts and Hoses that fit 1999 International 9800 SBAs, the following parts are the top sellers:

Poly Rib Belt Serpentine Belt; 42.52 Long, 6 Rib Count (19270557) – $25.99
Bottom Cog V-Belt: 45.5" Long, Exact Fit Premium Quality (19270486) – $16.79
Bottom Cog V-Belt; 46 Inch Long, Exact Fit Premium Quality (3300112) – $17.49

What’s the price range for 1999 International 9800 SBA Belts and Hoses?

Belts and Hose prices for the 1999 International 9800 SBA start at $4.99 and go up to $142.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1999 International 9800 SBA?

The average price for Belts and Hoses for the 1999 International 9800 SBA is $34.40. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other International 9800 SBA model years?

Yes, we currently carry Belts and Hoses for 3 model years of International 9800 SBAs between 1996 and 1998. Belts and Hoses are bought most frequently for the following model years: 1998, 1997, and 1996.

What are the cheapest Belts and Hoses for my 1999 International 9800 SBA?

The cheapest 1999 International 9800 SBA Belts and Hoses we carry in stock are:

Automotive V-Belt, Driveworks (5061059) – $4.99
Automotive V-Belt (5061040) – $7.99
Automotive V-Belt, Driveworks (5064597) – $10.39
Poly Rib Belt Serpentine Belt; 34.06 Long, 6 Rib Count (10065150) – $12.99
V-Belt, Top Cog (19270477) – $14.29

What are the top-rated Belts and Hoses that fit the 1999 International 9800 SBA?

Out of 77 reviews by customers, our 1999 International 9800 SBA Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1999 International 9800 SBA and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 48.03 Long, 6 Rib Count (10703283) – $29.99
- Poly Rib Belt Serpentine Belt; 34.06 Long, 6 Rib Count (10065150) – $12.99
- Poly Rib Belt Serpentine Belt; 48.03 Long, 6 Rib Count (99982999) – $30.49

What types of Belts and Hoses do you sell for my 1999 International 9800 SBA?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1999 International 9800 SBA:

Can I get help with 1999 International 9800 SBA Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about International Belts and Hoses and more.

What is your return policy for International 9800 SBA Belts and Hoses?

Advance Auto Parts keeps returns simple. For new International 9800 SBA Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 International 9800 SBA Belts and Hoses

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 46.27mm Width, Smooth (Part No.89102)

Dayco – Poly Rib Belt Serpentine Belt; 43.6 Long, 6 Rib Count (Part No.5060436)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 47.625" Long, 6 Rib Count, Exact Fit (Part No.K060470HD)

Dayco – Poly Rib Belt HD Serpentine Belt; 56.5 Long, 8 Rib Count, Heavy Duty (Part No.5080565)

Driveworks – Poly Rib Belt Serpentine Belt; 34.06 Long, 6 Rib Count (Part No.340K6)

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K100540HD)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 44.125" Long, 6 Rib Count, Exact Fit (Part No.K060435HD)

Gates – FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner (Part No.38519)

Dayco No Slack Gold Label – Belt Tensioner, Heavy Duty (Part No.89489)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910009A)

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR28514)

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR28492)

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22570)

Dayco – Double Cog V-Belt; 51.5 Inch Long, Exact Fit Premium Quality (Part No.28515)

Dayco – V-Belt, Top Cog (Part No.17405)

Dayco – Double Cog V-Belt; 49 Inch Long, Exact Fit Premium Quality (Part No.28490)

Driveworks – Automotive V-Belt (Part No.43017)

Gates – Automotive XL« High Capacity V-Belt (Part No.9313)

Dayco – Double Cog V-Belt; 56.5 Inch Long, Exact Fit Premium Quality (Part No.28565)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 2.50" Diameter (Part No.C71813)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, 2.50" Diameter (Part No.B71812)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 2.50" Diameter (Part No.C71813)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, 2.50" Diameter (Part No.B71812)

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 46.27mm Width, Smooth (Part No.89102)

Dayco No Slack Gold Label – Belt Tensioner, Heavy Duty (Part No.89489)

Dayco – Poly Rib Belt Serpentine Belt; 48.03 Long, 6 Rib Count (Part No.5060480)

Driveworks – Poly Rib Belt Serpentine Belt; 48.03 Long, 6 Rib Count (Part No.480K6)

Dayco – Bottom Cog V-Belt: 45.5" Long, Exact Fit Premium Quality (Part No.17455)

Driveworks – Poly Rib Belt Serpentine Belt; 34.06 Long, 6 Rib Count (Part No.340K6)

Driveworks – Poly Rib Belt Serpentine Belt; 43.6 Long, 6 Rib Count (Part No.436K6)

Dayco – Poly Rib Belt Serpentine Belt; 43.6 Long, 6 Rib Count (Part No.5060436)

Dayco – Poly Rib Belt Serpentine Belt; 34.06 Long, 6 Rib Count (Part No.5060340)

Dayco – V-Belt, Top Cog (Part No.17405)

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR28492)

Dayco – Poly Rib Belt Serpentine Belt; 42.52 Long, 6 Rib Count (Part No.5060425)

Dayco – Bottom Cog V-Belt; 46 Inch Long, Exact Fit Premium Quality (Part No.17460)

Dayco – Poly Rib Belt Serpentine Belt; 41.34 Long, 5 Rib Count (Part No.5050413)

Driveworks – Poly Rib Belt Serpentine Belt; 42.52 Long, 6 Rib Count (Part No.425K6)

Dayco – Bottom Cog V-Belt; 43 Inch Long, Exact Fit Premium Quality (Part No.17430)

Dayco – Double Cog V-Belt; 57 Inch Long, Exact Fit Premium Quality (Part No.22570)

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K100540HD)

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR28514)

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K060340HD)

Dayco – Poly Rib Belt HD Serpentine Belt; 54 Long, 10 Rib Count, Heavy Duty (Part No.5100540)

Dayco – Poly Rib Belt HD Serpentine Belt; 56.5 Long, 8 Rib Count, Heavy Duty (Part No.5080565)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9405HD)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 44.125" Long, 6 Rib Count, Exact Fit (Part No.K060435HD)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 48.29" Long, 6 Rib Count, Exact Fit (Part No.K060478HD)

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K060425HD)

Gates – Automotive XL« High Capacity V-Belt (Part No.9405)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060478)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060425)

Dayco – Double Cog V-Belt; 49 Inch Long, Exact Fit Premium Quality (Part No.28490)

Driveworks – Automotive V-Belt, Driveworks (Part No.46017)

Driveworks – Automotive V-Belt (Part No.43017)

Driveworks – Automotive V-Belt, Driveworks (Part No.44817)