1999 GMC Sonoma Differentials

Essential 1999 GMC Sonoma Differentials

Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

Pinion Install Kit For GM 8.5" Differential

from

$173.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.5″ rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Cross Pin Shaft For 7.2" GM (Part No.33403)

Cross Pin Shaft For 7.2" GM

from

$53.99
Cross pin shaft for 7.2″ GM.

Product Features:
  • Cross pin shaft
  • Fits GM 7.2″ IFS
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM8.6BIL)

Differential Carrier Gear Kit

from

$231.99
This Motive Gear Differential Rebuild Kit includes all of the parts required to rebuild your stock open differential. The gears are lapped for quiet operation. Includes spider and side gears, cross shaft, lock pin or bolt and thrust washers.

Product Features:
  • GM8.6″ INTERNAL KIT (OPEN) 30 SPL. MID 2000-2008
See More

Yukon Gear – Posi Shim Kit For GM 7.5" & 7.625" Eaton Positraction (Part No.16047)

Posi Shim Kit For GM 7.5" & 7.625" Eaton Positraction

from

$42.99
Product Features:
  • Shim kit
  • Fits GM 7.5″ and 7.625″ with Eaton positraction
See More

Powertrax – Lock Right Locker (Part No.1930-LR)

Lock Right Locker

from

$445.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Dorman – Differential Positive Unit Assembly (Part No.697-909)

    Differential Positive Unit Assembly

    from

    $819.99
    Hard use and poor lubrication can wear out a limited-slip differential. Restore original performance with this replacement differential carrier assembly that includes all-new spider gears, differential pins, clutches and carrier housing.

    Product Features:
    • Direct replacement – this 30 spline limited-slip differential carrier fits in place of this vehicle’s original equipment carrier.
    • 100% new – this differential carrier uses all-new components, including spider gears, diff pin, pre-load spring pack and clutch pack.
    • Ready to install – this differential carrier is shipped pre-assembled and ready to install
    • Ideal upgrade – can be used to upgrade from open differential to limited-slip in an existing differential
    See More

    Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

    Clutch Guide For GM 7.5" & 7.6" Dura Grip

    from

    $10.99
    Product Features:
    • Clutch guide
    • Fits GM 7.5″ and 7.625″ Dura Grip
    See More

    Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

    Differential Yoke including Seal and Pinion Nut

    from

    $139.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

    Posi Spring Kit For GM 7.5", With Preload Plates

    from

    $153.99
    Product Features:
    • Positraction spring kit
    • Fits GM 7.5″ and 7.625″ Dura Grip
    • Includes preload plates
    See More

    Yukon Gear – Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck (Part No.55008)

    Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck

    from

    $21.99
    Product Features:
    • Pinion depth shims for GM 7.5″, 7.625″, 7.6 IFS, 7.6 IRS, 7.75″, 8.2″, 1955-1964 passenger car and 12 bolt car and truck
    See More

    Driveworks – Differential Pinion Seal (Part No.S-710474)

    Differential Pinion Seal

    from

    $26.99
    Product Features:
    • Brand may vary by location
    See More

    MTC – Differential Drain P (Part No.J7065587755MTC)

    Differential Drain P

    from

    $12.52
    Differential Drain P

    MOOG – Differential Carrier Bushing (Part No.K6572)

    Differential Carrier Bushing

    from

    $15.29
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • Manufactured from high quality elastomer compounds for durability and ride performance
    • Assembled with proper precompression for ultimate in performance and feel
    • High level bonding adhesive is used for durability
    • Elastomer compounds do not utilize any reground rubber fillers
    See More

    Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

    Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes

    from

    $57.99
    8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

    Product Features:
    • Pinion Redi-sleeve
    • Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
    See More

    Yukon Gear – Standard Open Pinion Gear And Thrust Washer For 7.2" GM (Part No.33376)

    Standard Open Pinion Gear And Thrust Washer For 7.2" GM

    from

    $7.99
    Standard open pinion gear thrust washer for 7.2″ GM.

    Product Features:
    • Pinion gear thrust washer
    • Fits GM 7.2″ IFS
    See More

    Yukon Gear – Bearing Race Driver (Part No.56023)

    Bearing Race Driver

    from

    $219.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits M88010 race
    • All steel construction
    See More

    Yukon Gear – Master Overhaul Kit For GM 8.5" Differential With Aftermarket Positraction (Part No.14088)

    Master Overhaul Kit For GM 8.5" Differential With Aftermarket Positraction

    from

    $309.99
    Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Supershims.

    Product Features:
    • Fits GM 8.5″ rear with aftermarket positraction
    • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
    See More

    FAG US – CUP (Part No.M802011)

    CUP

    from

    $15.29
    CUP

    National – Shaft Repair Sleeve (Part No.99139)

    Shaft Repair Sleeve

    from

    $39.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Yukon Gear – Standard Open Spider Gear Kit For Late 7.625" GM With 28 Spline Axles (Part No.16049)

    Standard Open Spider Gear Kit For Late 7.625" GM With 28 Spline Axles

    from

    $187.99
    Yukon standard open spider gear kit for late 7.625″ GM with 28 spline axles and large and small windows. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Spider gear kit
    • Fits GM 7.625″ open differential with 28 spline axles
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Yukon Gear – 7.2" Shifter Seal (Part No.30280)

    7.2" Shifter Seal

    from

    $28.99
    7.2″ shifter seal.Yukon Mighty seal.

    Product Features:
    • Shifter seal
    • Fits GM 7.2″ IFS
    See More

    Motive Gear – Differential Carrier (Part No.GM8.6L)

    Differential Carrier

    from

    $221.99
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
    See More

    Dorman – Help – Pinion Crush Sleeves (Part No.81058)

    Pinion Crush Sleeves

    from

    $6.49
    This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
    • Required replacement – when servicing the differential
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    ATP – DIFF COVER KIT (Part No.111101)

    DIFF COVER KIT

    from

    $35.99
    DIFF COVER KIT

    Yukon Gear – Aluminum Girdle Cover For GM 7.5" & 7.625" (Part No.32118)

    Aluminum Girdle Cover For GM 7.5" & 7.625"

    from

    $379.99
    Product Features:
    • Fits GM 7.5″ and 7.625″
    • Aluminum girdle cover
    See More

    Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

    Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

    from

    $59.99
    Product Features:
    • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
    • Interlocking design makes installation much easier
    See More

    1999 GMC Sonoma Differentials

    Maybe you’re in the middle of a full rebuild of that 1999 GMC Sonoma. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 354 different Differentials in our inventory ranging from $1.99 to $1,839.99. That means you can find the exact parts or products you need to keep that 1999 GMC Sonoma running smoothly.

    Differentials are only as good as their brand. We stock 23 different brands to make sure you have plenty of trusted parts to choose from for your 1999 GMC Sonoma. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1999 GMC Sonoma, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,111 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 4.9 stars and Rear Differential Cover with 4.5 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1999 GMC Sonoma rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1999 GMC Sonoma Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 GMC Sonoma demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Sonoma the best it can be. Be sure to browse some of our top Differentials brands and parts.

    FAQs for 1999 GMC Sonoma Differentials

    What are the most purchased Differentials for the 1999 GMC Sonoma?

    Out of 354 Differentials for the 1999 GMC Sonoma, the most popular in our inventory are:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    Taper Bearing Set
    from $10.79
    (33)
    Taper Bearing Set
    Differential Bearings

    What are the top-rated 1999 GMC Sonoma Differentials?

    Top-rated Differentials for your 1999 GMC Sonoma based on customer reviews/ratings are:
    DIFFERENTIAL GASKET
    from $7.99
    (45)
    DIFFERENTIAL GASKET
    “Some say no need for a gasket and to use gasket sealer only its just as good. I like to make sure that the cover is installed properly to avoid any l”
    Rear Differential Cover
    from $20.99
    (38)
    Rear Differential Cover
    “Looks great, face lift for the rear differential. Old one was rusted & in bad shape. Just remember to get the correct size.”
    Rear Differential Cover
    from $32.99
    (14)
    Rear Differential Cover
    “Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”