1999 GMC C3500 Valve Cover and Cylinder Heads

Sealed Power┬« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:

• Valve Spring Retainers for Use OE Cast Iron Heads
• Superior Quality Heat-Treated Steel
• Machined for Strength with Black Oxide Finish
• Finish Ensures Rust and Corrosion Protection

10 Degree Superlock Steel Retainer for 1.250" OD Valve Spring

Sealed Power┬« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• State-of-the-art manufacturing
• Exceptional material quality
• Exacting tolerances
• Heat treated tips
• Stock or mild modified replacement
• Made in USA

Product Features:

• Case-Hardened Tubing
• Surface Hardening
• Welded Ends
• 0.3125 in. Diameter
• Use with or without Hardened Steel Guideplates

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
• STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
• PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
• SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal for the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids. A typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use. Mr. Gasket provides a Limited Lifetime Warranty for MLS cylinder head gaskets.

Product Features:

• Gasket bore – 4.060″ Thickness – .040″
• Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
• Optimized sealing embossments seals extreme cylinder pressure
• Provides excellent stability and reduces cylinder bore distortion.
• Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
• Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
• For high-performance street, drag race and oval track use

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Complete rocker arm assembly
• 1 Arm
• 1 Ball
• 1 Nut
• Utilizes ISO & QS certified manufacturing

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Complete rocker arm assembly
• 1 Arm
• 1 Ball
• 1 Nut
• Utilizes ISO & QS certified manufacturing

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Validated for fit, form and function
• Unsurpassed quality you can trust
• Includes all the parts necessary to complete the repair unless otherwise noted

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
• SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
• NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
• STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

• For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
• Super Locks are recommended in all race applications

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Chrome plated stem
• Hard coating added to surface for strength & aiding in lubrication
• Note – coating added in varying thicknesses depending on application
• Innovative design, using leading edge materials
• Utilizes ISO & QS certified manufacturing

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Chrome plated stem
• Hard coating added to surface for strength & aiding in lubrication
• Note – coating added in varying thicknesses depending on application
• Innovative design, using leading edge materials
• Utilizes ISO & QS certified manufacturing

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

• Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
• Nominally Rated At 200,000 Psi Tensile Strength
• These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
• Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

• High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
• Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
• Rated At 180,000 PSI Tensile Strength
• High Performance Head Bolts Are Stronger

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Edelbrock part #97384 high performance hydraulic roller lifters for 1987 and later small-block Chevys are the perfect match for Edelbrock Rollin’ Thunder hydraulic roller cams. The Edelbrock Part #97384 are a drop-in replacement for 1987 and later blocks

Product Features:

• For Small Block Chevy (1987-Later)
• Without Tie Bar
• .75 To 1 Turn Of Preload Is Recommended
• Set of 16
• Made In The USA

Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1958-1986 Chevrolet Small Block 265-400 engines, this 3-hole valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Product Features:

• Designed for 1958-1986 Chevrolet Small Block 265-400 engines
• Baffled for breather system compatibility
• Sold in pairs
• Triple chrome-plated steel construction
• Stock height
• Features OEM style sealing edge

The Vintage Series family of die-cast aluminum engine dress up accessories features a classically inspired finned design, high definition retro branding, and are offered in an array of finishes to best suite your custom build.

Product Features:

• Features a high definition “Chevrolet” script logo and a wrap-around finned design to add classic muscle styling to your engine bay
• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt pattern
• Die-cast aluminum construction ensures high quality details, and reduces opportunities for valve cover flange warping and oil leaks
• 3.3″ tall with a solid body for non-emissions applications or custom crankcase ventilation setups
• Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

• Direct replacement – this valve cover matches the original equipment part for fit and function
• Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

The Edelbrock #60555 Performer RPM Rectangle Port cylinder head is designed for Big-Block Chevy applications. The Edelbrock #60555 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants per

Product Features:

• Complete Single For Hydraulic Roller
• 118cc Combustion Chamber Volume
• 315cc Intake/110cc Exhaust Runner Volume
• 2.19 in. Intake/1.88 in. Exhaust Valve Diameter
• 0.562 in. Deck Thickness

Product Features:

• Designed for 1987-95 Throttle Body Injection or Tuned Port Injection 5.7L Small-Block Chevy engines originally equipped with center bolt valve covers
• Flat Tappet Camshaft Type
• 60cc chambers with 165cc intake ports
• Size of intake valve is 2.02 in. and exhaust valve is 1.60 in.
• Sold as one complete head

The Edelbrock #60735 Performer RPM cylinder head is designed for 1955-86 Small-Block Chevy applications. The Edelbrock #60735 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performa

Product Features:

• Complete Single For Mechanical Flat Tappet
• 70cc Combustion Chamber Volume
• 195cc Intake/65cc Exhaust Runner Volume
• 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
• 0.562 in. Deck Thickness

Spectre’s Valve Cover Hold Downs feature high quality steel construction with a triple chrome-plated finish. Manufactured for a universal fit, this product’s T-bar heads allow for easy tightening without tools. Sold 4 per package, these studs are intended to fit standard height Chevy Centerbolt valve covers.

Product Features:

• 4 bolts included in each package
• T-bar head design
• Triple chrome-plated finish
• Fits standard height Chevy Center bolt valve covers