1999 Chrysler Cirrus Belts and Hoses

Below you will find various in-demand Chrysler Belts and Hoses, components and accessories for your 1999 Cirrus. Advance Auto Parts has popular Cirrus parts like Heater Hoses, Pulleys, Radiator Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Cirrus model years including 1995, 1996, 1997, 1998, 2000 and more. Select a category of 1999 Chrysler Cirrus Belts and Hoses below and start saving instantly.

Popular 1999 Chrysler Cirrus Belts and Hoses Categories

Serpentine Belts

Idler Pulleys

Belt Tensioner Pulleys

Heater Hose Fittings

Engine Oil Cooler Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 1999 Chrysler Cirruses

from

$14.99

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Plastic And Metal Construction
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$35.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$29.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$37.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$1.99

Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$59.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$25.49

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$14.79

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$17.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$31.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$23.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$1.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$17.49

Constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Approved for marine applications.

Product Features:

High flexibility for versatile applications
High environmental resistance to weathering, coolant deterioration and ozone
Suitable for transmitter hose applications
Polyester textile cord reinforcement for high durability
Approved for marine applications.
Exceeds SAE 20R3 Class A Standard Tube and Lid
Temperature range -57 degrees F to +400 degrees F (-57 degrees C to +204 degrees C)
Note: For maintenance-free connection, use the PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications

from

$65.99

Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
Durable construction – made of fuel-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$55.99

Spectra Premium filler neck hoses are engineered, developed and validated by our in-house team of Canadian engineers ensuring it meets or exceeds the OE specifications.

Product Features:

Manufactured with high quality rubber to ensure it maintains its dimensional characteristics even in extreme cold/hot weather variations seen in the North American market
OE design to ensure exact fit, form and function
Fit tested to ensure ease of installation for the application it was intended for
Part is tested to ensure it meets the same requirements as OE specifications
Compatible with all fuel types it’s designed for
Includes necessary clamps for a complete installation solution

from

$32.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$24.79

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$40.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$19.79

Quick-Lok(R)Connectors provide a fast, easy way to connect replacement heater hose on cars and trucks.

Product Features:

Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
Made with a new design that holds the O-ring so they can’t be lost or damaged
Fit just as the OEM quick connects for easy installation as well as removal

from

$31.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

Upgrade your 1999 Chrysler Cirrus with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1999 Chrysler Cirrus, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Belts and Hoses are key to keeping your Cirrus functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Belts and Hoses for the 1999 Chrysler Cirrus, designed to meet your needs without breaking the bank. From Heater Hose replacements to Pulleys upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1999 Chrysler Cirrus at great prices. Our Belts and Hoses inventory for this model ranges from just $1.99 to $65.99, with an average price of $30.97. Our 35 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 1999 Chrysler Cirrus without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Chrysler Cirrus, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, Dayco, DriveWorks, and more. Litens Belts and Hoses start at just $25.49 and boast an impressive 4.7 stars average rating from customers. Dayco and DriveWorks also bring quality to the table, with Belts and Hoses available starting at $17.99, and at an average 4.5 stars rating. With 332 customer reviews and counting, our 1999 Chrysler Cirrus Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Chrysler Cirrus is always ready to roll. We’re committed to providing you with everything you need to keep your Cirrus in top shape, all in one place. Start shopping confidently below for your 1999 Chrysler Cirrus!

Best-Selling Heater Hoses for 1999 Chrysler Cirruses

Enhance the driving experience in your Chrysler with 4 quality Heater Hose components, starting at $1.99.

show more show less

from

$1.99

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$19.79

Quick-Lok(R)Connectors provide a fast, easy way to connect replacement heater hose on cars and trucks.

Product Features:

Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
Made with a new design that holds the O-ring so they can’t be lost or damaged
Fit just as the OEM quick connects for easy installation as well as removal

from

$33.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$44.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Top Picks for 1999 Chrysler Cirrus Radiator Hoses

Upgrade Chrysler Cirruses with top-quality Radiator Hoses parts, including 4 OEM and aftermarket selections for your 1999 model.

show more show less

from

$29.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$18.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$17.49

High flexibility for versatile applications
High environmental resistance to weathering, coolant deterioration and ozone
Suitable for transmitter hose applications
Polyester textile cord reinforcement for high durability
Approved for marine applications.
Exceeds SAE 20R3 Class A Standard Tube and Lid
Temperature range -57 degrees F to +400 degrees F (-57 degrees C to +204 degrees C)
Note: For maintenance-free connection, use the PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications

from

$1.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

In-Demand Fuel Hoses for 1999 Chrysler Cirruses

Select from 1 premium Fuel Hoses parts for your 1999 Chrysler Cirrus.

show more show less

from

$65.99

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
Durable construction – made of fuel-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

Most Sold 1999 Chrysler Cirrus Serpentine and V Belts

Explore our best-selling Chrysler parts for the 1999 Cirrus among 17 OEM and aftermarket options starting from $14.29.

show more show less

from

$35.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$29.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$31.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$17.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$32.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$35.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$31.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$14.29

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$14.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$40.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$38.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all original equipment manufacturer specifications.
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$36.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$32.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all OEM specifications
It is recommended to replace the tensioner (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$32.99

Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OE fit, form, and function

from

$31.99

The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all OEM specifications
Replacement of the tensioner is recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$28.99

Developed using real-world track data, the Dayco supercharger belt is engineered with a proprietary EPDM construction with aramid cords and either 8 or 10 ribs depending on application. This belt is designed for late model high-performance supercharged street cars like ZR1 Corvettes, Shelby Mustangs and SRT Hellcat applications and is part of a line of racing belts engineered to provide maximum performance under the most extreme conditions. Comprised of specially blended compounds that are application specific, these belts are some of the strongest, most flexible belts on the market today.

Product Features:

Aramid fiber loaded EPDM construction and high stiffness PET cords eliminate belt stretch
Proven to provide extreme durability and reduced slip under high boost conditions
Tested by top level Drag Pak competitors, including Watson Racing, using roots style superchargers

from

$16.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OE fit, form, and function

Top-Rated Belts and Hoses Brands For Your 1999 Chrysler Cirrus

Shop for the best-rated brands offering Belts and Hoses and other products for your 1999 Chrysler Cirruses. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and DriveWorks, and more. Belts and Hoses from these brands that fit a 1999 Cirrus start at just $17.99 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 1999 Chrysler Cirrus Belts and Hoses

When it comes to maintaining or upgrading your 1999 Chrysler Cirrus, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 1999 Chrysler Cirrus. With over 1 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $25.49. Plus, with over 1 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $25.49

(1)

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter

“Good product at a decent price”

Popular Dayco 1999 Chrysler Cirrus Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 1999 Chrysler Cirrus owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 1999 Cirrus, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Dayco Belts and Hoses range from $31.99 to $35.99, plus, with more than 201 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $35.99

(9)

Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count

“This is replacement part that is looks durable and was a perfect fit”

from $31.99

(8)

Poly Rib Belt Serpentine Belt; 38.2 Long, 4 Rib Count

“The product was as described. I am very satisfied with the quality.”

from $31.99

(184)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.25" Diameter

“Good”

FAQs for 1999 Chrysler Cirrus Belts and Hoses

Which Belts and Hoses are best-sellers for 1999 Chrysler Cirruses?

Out of 35 Belts and Hoses that fit 1999 Chrysler Cirruses, the following parts are the top sellers:

Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (10844721) – $1.99
Quick-Lok Heater Hose Connector (10911688) – $19.79
Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (5065100) – $29.99

What’s the price range for 1999 Chrysler Cirrus Belts and Hoses?

Belts and Hose prices for the 1999 Chrysler Cirrus start at $1.99 and go up to $65.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1999 Chrysler Cirrus?

The average price for Belts and Hoses for the 1999 Chrysler Cirrus is $30.97. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chrysler Cirrus model years?

Yes, we currently carry Belts and Hoses for 4 model years of Chrysler Cirruses between 1995 and 2000. Belts and Hoses are bought most frequently for the following model years: 2000, 1998, 1997, 1996, and 1995.

What are the cheapest Belts and Hoses for my 1999 Chrysler Cirrus?

The cheapest 1999 Chrysler Cirrus Belts and Hoses we carry in stock are:

Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (10844721) – $1.99
Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (10505038) – $1.99
Poly Rib Belt Serpentine Belt; 35.5 Long, 4 Rib Count (5061598) – $14.29
V-Ribbed Belt, Driveworks (99984561) – $14.79
Idler Pulley (Pulley only) (10041701) – $14.99

What are the top-rated Belts and Hoses that fit the 1999 Chrysler Cirrus?

Out of 332 reviews by customers, our 1999 Chrysler Cirrus Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1999 Chrysler Cirrus and their top-rated products:

Pulleys
- Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (10457813) – $25.49
- Idler Pulley (Pulley only) (10041701) – $14.99
Serpentine and V Belts
- Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (10457813) – $25.49
- Idler Pulley (Pulley only) (10041701) – $14.99

What types of Belts and Hoses do you sell for my 1999 Chrysler Cirrus?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 1999 Chrysler Cirrus:

Can I get help with 1999 Chrysler Cirrus Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Belts and Hoses and more.

What is your return policy for Chrysler Cirrus Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chrysler Cirrus Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Chrysler Cirrus Belts and Hoses

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

Crown Auto Jeep Replacmnt – Single Belt, 3.55 Inch Diameter, Black, Steel (Part No.53002905)

Gates – Premium Molded Coolant Hose (Part No.22126)

Gates – Premium Molded Coolant Hose (Part No.21508)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, .63" Diameter (Part No.B71307)

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900055A)

Driveworks – V-Ribbed Belt, Driveworks (Part No.540K6)

Driveworks – Poly Rib Belt Serpentine Belt; 38.2 Long, 4 Rib Count (Part No.382K4)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.25" Diameter (Part No.C71766)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.25" Diameter (Part No.C71907)

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)

Gates – Silicone Straight Heater Hose (Sold by foot) (Part No.26241)

Dorman – Fuel Filler Neck Hose (Part No.573-091)

Spectra Premium – Fuel Filler Hose (Part No.FNH005)

Dayco – Idler Pulley, Dayco (Part No.89097)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.25" Diameter (Part No.E71767)

Gates – Premium Molded Coolant Hose (Part No.22121)

Gates – Quick-Lok Heater Hose Connector (Part No.28500)

Dayco – Poly Rib Belt Serpentine Belt; 38.2 Long, 4 Rib Count (Part No.5040382)

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Gates – Quick-Lok Heater Hose Connector (Part No.28500)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.86126)

Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 12 Inch Length (Part No.86125)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900055A)

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

Crown Auto Jeep Replacmnt – Single Belt, 3.55 Inch Diameter, Black, Steel (Part No.53002905)

Gates – Premium Molded Coolant Hose (Part No.21508)

Gates – Premium Molded Coolant Hose (Part No.22129)

Gates – Silicone Straight Heater Hose (Sold by foot) (Part No.26241)

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)

Dorman – Fuel Filler Neck Hose (Part No.573-091)

Dayco – Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (Part No.5060560)

Driveworks – Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (Part No.560K6)

Dayco – Poly Rib Belt Serpentine Belt; 38.2 Long, 4 Rib Count (Part No.5040382)

Driveworks – Poly Rib Belt Serpentine Belt; 38.2 Long, 4 Rib Count (Part No.382K4)

Dayco – Idler Pulley, Dayco (Part No.89097)

Dayco – Poly Rib Belt Serpentine Belt; 35.5 Long, 4 Rib Count (Part No.5040355)

Dayco – Poly Rib Belt Serpentine Belt; 54 Long, 6 Rib Count (Part No.5060540)

Driveworks – Poly Rib Belt Serpentine Belt; 35.5 Long, 4 Rib Count (Part No.355K4)

Driveworks – V-Ribbed Belt, Driveworks (Part No.540K6)

Gates – Micro-V Serpentine Drive Belt (Part No.K040355)

Gates – Micro-V Serpentine Drive Belt (Part No.K060563)

Gates – Micro-V Serpentine Drive Belt (Part No.K060539)

Gates – Micro-V Serpentine Drive Belt (Part No.K060557)

Carquest Standard – Serpentine Belt: 56.0" Long, 6 Rib Count (Part No.560K6)

Gates – Micro-V Serpentine Drive Belt (Part No.K040384)

Dayco – Heavy Duty Serpentine Belt; 54 Long, 6 Rib Count (Part No.5060540SC)

Carquest Standard – Serpentine Belt: 35.5" Long, 4 Rib Count (Part No.355K4)