1999 Chevrolet Tahoe Performance and Racing Products

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1999 Tahoe. Advance Auto Parts has popular Tahoe parts like Performance Air Filters, Performance Exhaust Products, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Tahoe model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1999 Chevrolet Tahoe Performance and Racing Products below and start saving instantly.

Popular 1999 Chevrolet Tahoe Performance and Racing Products Categories

Performance Air Filters

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Exhaust Headers

Engine Cold Air Intakes

Performance Shifters

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Ignition Modules

Performance Engine Intake Manifold Gaskets

Performance Engine Valve Cover Gasket Sets

Performance Chassis Bushing Kits

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Leaf Spring Bushings

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Timing Cover Gasket Sets

Performance Engine Cylinder Heads

Performance Torque Converters

Manual Transmission Main Shaft Race

Essential Performance and Racing Products for 1999 Chevrolet Tahoes

from

$73.99

The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$514.99

8″ Tall Air Filter:This intake system utilizes an oil free, 8″ tall inverted top conical 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum airflow and performance.Mandrel-Bent Tubing:One-Piece 3-1/2″ Mandrel-Bent Powder-Coated matte gray aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque.One-Piece Heat Shield:Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.3-Angle Adaptor:The 3-angle adaptor is used to speed up the airflow after the air filter for improved performance and throttle response.Hassle-Free Installation:All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.Note 1: Does NOT fit eAssist models.

Product Features:

Dyno-Proven Gains up to +18 HP and +23 Lbs. x Ft. TQ
Outflows Factory Intake by 55%
Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
3-1/2″ Mandrel-bent Powder-coated matte gray aluminum intake tube improves volumetric efficiency for better performance

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$609.99

HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
New Turbine Hub
New Springs/Rollers In Stator

from

$42.49

Designed for use with round stick shifters. Complete with chrome ID plate and mounting hardware. Measures: 4-3/8 in. x 5-3/8 in. with 3 pleats.

Product Features:

Complete with Mounting Hardware
Adapt To Most Shifter Install
Hurst Quality
Works Well with Round Shift Levers
Chrome ID Plate

from

$41.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$605.99

Product Features:

50-State Street Legal Aluminum Cylinder Head
Out-of-the-Box Bolt-On Performance
Hand-Blended Intake and Exhaust Bowls
CNC-Matched Intake/Exhaust Ports in Std Location
Thicker Deck Surfaces than Other Brands
Hardened Tip Stainless Swirl-Polished Valves
Heli-Coils Rocker Studs And Exhaust Bolt Holes

from

$65.99

These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:

Replacement Coil For GM Dual Connector Coil
Improved Turns Ratio
Lower Primary Resistance
Bolt-In replacement coil
Produce More Output Voltage
Smooth Idle

from

$407.99

RngPnn

from

$441.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$85.39

Product Features:

Water/Weather Resistant
Re-Useable
Will Not Burn Or Blow Out
Suitable For Port-Matching
Made In USA

from

$91.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$68.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$325.99

Product Features:

Bolt On Quickly And Easily
Top Performance/Clean Machine
Increased Efficiency
Leak Free Seal
Connects To Exhaust Head Pipe
Complete With Premium Gaskets
16-Gauge Tubing For Durability

from

$7.69

CUP

from

$41.99

This Spectre OEM replacement air filter is an easy to install performance option for the stock panel air filter in multiple Chevy and GM truck applications. With its HPR (High Performance Replacement) synthetic air filter media, this panel air filter has been designed to provide more horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock air box, this air filter is easy to install and has been engineered with a sealing edge specific to your air box to insure a proper seal for great engine protection.

Product Features:

HPR OE Replacement Air Filter
High flow replacement filter designed to fit perfectly in your stock air box
Engineered for increased flow and greater performance
Fits multiple Chevy and GM truck applications
Factory pre-oiled and ready to use
Easy to install with no special tools or skills required

from

$133.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$544.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$224.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:

Complete Super Tune Kit
8mm Spiral Core Wires
Accel Classic Core Plugs
High Performance Cap And Rotor
Reduced Emissions

from

$119.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$20.29

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Steel core gasket construction
Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
Not intended for use in emission controlled vehicles.

from

$158.99

This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM ignition systems with the externally mounted module. 1990 thru 1995.

Product Features:

Fits Most Stock And Modified Distributors
Dwell Control Circuit
Resists False Triggering

from

$43.99

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Die-cut for an excellent fit
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use

from

$48.09

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$30.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$85.29

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$23.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$68.99

High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

Product Features:

Steel core provides rigidity, durability and prevents gasket push out
Molded rubber coating seals minor irregularities in pan surface
One piece design is easier to install and even less prone to leak
Direct replacement suitable for all uses – street, racing, heavy duty
Include both gasket and new oil pan bolts

Upgrade your 1999 Chevrolet Tahoe with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1999 Chevrolet Tahoe, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Tahoe functioning at its best. At Advance Auto Parts, we offer a wide selection of 53 Performance and Racing Products for the 1999 Chevrolet Tahoe, designed to meet your needs without breaking the bank. From Performance Air Filter replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1999 Chevrolet Tahoe at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $889.99, with an average price of $263.95. Our 53 Performance and Racing Products in stock come from 18 trusted brands, so you’re sure to find the right part for your 1999 Chevrolet Tahoe without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Chevrolet Tahoe, we stock popular OEM and aftermarket Performance and Racing Products from top names like FEL-PRO Performance, Energy Suspension, Flowmaster Inc., and more. FEL-PRO Performance Performance and Racing Products start at just $20.29 and boast an impressive 4 stars average rating from customers. Energy Suspension and Flowmaster Inc. also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4 stars rating. With 147 customer reviews and counting, our 1999 Chevrolet Tahoe Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Chevrolet Tahoe is always ready to roll. We’re committed to providing you with everything you need to keep your Tahoe in top shape, all in one place. Start shopping confidently below for your 1999 Chevrolet Tahoe!

Best-Selling Performance Air Filters for 1999 Chevrolet Tahoes

Enhance the driving experience in your Chevrolet with 1 quality Performance Air Filter components, starting at $99.99.

show more show less

from

$99.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

Most Popular 1999 Chevrolet Tahoe Performance Exhaust Products

Customize your Chevrolet with 8 Performance Exhaust Products products like Performance Exhaust Mufflers, Performance Exhaust Manifold Gaskets, and Performance Exhaust Headers, all priced under $325.99.

show more show less

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$102.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$99.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$325.99

Product Features:

Bolt On Quickly And Easily
Top Performance/Clean Machine
Increased Efficiency
Leak Free Seal
Connects To Exhaust Head Pipe
Complete With Premium Gaskets
16-Gauge Tubing For Durability

from

$133.99

from

$185.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$126.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$206.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Mild to stock exterior exhaust tone
Minimal interior resonance
Excellent choice for large displacement vehicles
Improved horsepower, torque and potential mileage improvement

Top Picks for 1999 Chevrolet Tahoe Performance Distributors

Upgrade Chevrolet Tahoes with top-quality Performance Distributors parts, including 1 OEM and aftermarket selections for your 1999 model.

show more show less

from

$236.99

Complete Super Tune Kit
8mm Spiral Core Wires
Accel Classic Core Plugs
High Performance Cap And Rotor
Reduced Emissions

In-Demand Performance Ignition Products for 1999 Chevrolet Tahoes

Select from 5 premium Performance Ignition Products parts for your 1999 Chevrolet Tahoe, with prices ranging from $30.49 to $186.99.

show more show less

from

$85.29

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$76.99

When it comes to late model performance parts, nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. GM single connector coil PN 8231. Used on 1996 to 1999 General Motors vehicles. Installation tip: if you plan to install an MSD Ignition with this coil, use a PN 8877 harness for a direct plug-in installation.

Product Features:

Direct performance replacement coil for GM 1996-1999
80:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$123.99

LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.

Product Features:

Unique, stylized hood scoops for trucks and cars
Transform stock hood into a simulated performance hood
Can easily be painted to match any factory color

from

$30.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$186.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Most Sold 1999 Chevrolet Tahoe Performance Engines

Explore our best-selling Chevrolet parts for the 1999 Tahoe among 12 OEM and aftermarket options starting from $20.29.

show more show less

from

$39.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$52.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$23.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$23.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$39.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$43.99

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Die-cut for an excellent fit
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use

from

$20.29

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Steel core gasket construction
Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
Not intended for use in emission controlled vehicles.

from

$889.99

The Edelbrock #609719 E-Tec Cylinder Heads are replacements for 302, 327, 350 & 400 c.i.d. S/B Chevy engines with “Vortec-style” manifolds. They feature an LT1-style raised runner intake port design for increased air-flow and ultimate performance. A uniqu

from

$709.99

Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$616.99

Product Features:

170cc Intake 64cc Chamber for Vortec-Style Intake
20% Inc Flow Over Cast-Iron Vortec Heads
Accept Standard or Center-Bolt Valve Covers
Hand-Blended Intake and Exhaust Bowls
Heli-Coils in Rocker Studs and Exhaust Bolt Holes

from

$609.99

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
New Turbine Hub
New Springs/Rollers In Stator

from

$544.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

Top-Rated Performance and Racing Products Brands For Your 1999 Chevrolet Tahoe

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1999 Chevrolet Tahoes. Below you’ll find some of our best rated Performance and Racing Products from FEL-PRO Performance, Energy Suspension, and Flowmaster Inc., and more. Performance and Racing Products from these brands that fit a 1999 Tahoe start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular FEL-PRO Performance 1999 Chevrolet Tahoe Performance and Racing Products

When it comes to maintaining or upgrading your 1999 Chevrolet Tahoe, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. FEL-PRO Performance ticks all of those boxes. We offer a wide selection of FEL-PRO Performance Performance and Racing Products, specifically designed for the 1999 Chevrolet Tahoe. With over 7 FEL-PRO Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $20.29, with an average price of just $32.96. Plus, with over 6 customer reviews and an average rating of 4 stars, you can trust that our FEL-PRO Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$39.49

This product is not rated

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

“”

from
$39.49

(1)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

“Real good products”

from
$20.29

This product is not rated

Engine Timing Cover Gasket

“”

Popular Energy Suspension 1999 Chevrolet Tahoe Performance and Racing Products

Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1999 Chevrolet Tahoe owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1999 Tahoe, Advance Auto Parts carries a full inventory of 6 Energy Suspension Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $9.99 to $441.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from
$41.99

This product is not rated

Sway Bar Bushing Set

“”

from
$91.99

This product is not rated

Leaf Spring Bushing Set

“”

from
$83.99

This product is not rated

Control Arm Bushing Set

“”

FAQs for 1999 Chevrolet Tahoe Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1999 Chevrolet Tahoes?

Out of 53 Performance and Racing Products that fit 1999 Chevrolet Tahoes, the following parts are the top sellers:

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (5189543) – $39.49
Tie Rod Dust Boot (17360821) – $9.99
40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (17310099) – $99.99

What’s the price range for 1999 Chevrolet Tahoe Performance and Racing Products?

Performance and Racing Product prices for the 1999 Chevrolet Tahoe start at $7.69 and go up to $889.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1999 Chevrolet Tahoe?

The average price for Performance and Racing Products for the 1999 Chevrolet Tahoe is $263.95. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Tahoe model years?

Yes, we currently carry Performance and Racing Products for 30 model years of Chevrolet Tahoes between 1995 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 1999 Chevrolet Tahoe?

The cheapest 1999 Chevrolet Tahoe Performance and Racing Products we carry in stock are:

CUP (50206003) – $7.69
Tie Rod Dust Boot (17360821) – $9.99
Engine Timing Cover Gasket (21021905) – $20.29
Engine Valve Cover Gasket Set (5992664) – $23.49
PERFORMANCE VALVE COVER GASKET SET (5189713) – $23.49

What are the top-rated Performance and Racing Products that fit the 1999 Chevrolet Tahoe?

Out of 147 reviews by customers, our 1999 Chevrolet Tahoe Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1999 Chevrolet Tahoe and their top-rated products:

Performance Air Intake Kits
- Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter (17400111) – $349.99
Performance Air Filters
- Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter (17400111) – $349.99

What types of Performance and Racing Products do you sell for my 1999 Chevrolet Tahoe?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1999 Chevrolet Tahoe:

Can I get help with 1999 Chevrolet Tahoe Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet Tahoe Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Tahoe Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Chevrolet Tahoe Performance and Racing Products

B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-12332-GR)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

B & M – Holeshot 2400 (Part No.70419)

Hurst – B-1 Shifter Boot and Plate (Part No.1147336)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5205G)

Edelbrock – Engine Cylinder Head (Part No.60849)

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

Richmond Gear – RngPnn (Part No.69-0173-1)

Energy Suspension – Hyper-Flex System (Part No.3.18124G)

Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2128R)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

Flowtech – Shorty; Smog Headers (Part No.91832FLT)

FAG US – CUP (Part No.LM48510)

Spectre – Spectre Replacement Air Filter (Part No.HPR8755)

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)

Powertrax – No-Slip Traction System (Part No.9207853005)

Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4)

Energy Suspension – Control Arm Bushing Set (Part No.3.3190R)

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Accel – GM Ext. Coil 90-95 Ign Module (Part No.35370)

Mr. Gasket – Intake Gasket (Part No.136G)

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Unilite Ignition Module (Part No.605)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.6561)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1796)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)

Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.43043)

Flowtech – Shorty; Smog Headers (Part No.91832FLT)

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)

Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)

Flowmaster Inc. – Super 44 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.843048)

Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)

Accel – Tst GM 96-00 5.0/5.7L Vortech (Part No.TST3)

Mallory – Unilite Ignition Module (Part No.605)

MSD Ignition – Coil; GM; External Single Connector; 96-97 (Part No.8231)

Auto Ventshade (AVS) – Eclipse; Large Hood Scoops (Part No.80001)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Mr. Gasket – Intake Gasket (Part No.136G)

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Edelbrock – E-Tec-170 Small-Block Chevy Cylinder Head Flat Tappet Polished (Part No.609719)

B & M – Holeshot 2400 (Part No.70441)

Edelbrock – Engine Cylinder Head (Part No.60959)

B & M – Holeshot 2400 (Part No.70419)

B & M – Torque Converter, Holeshot 2000 (Part No.70417)