1999 Chevrolet Silverado 1500 Exhaust System Kits

This Rebel Series exhaust is a dual, middle-side exit system for the 2009-2018 GM Silverado/Sierra 1500 Crew Cab/Long Bed and delivers +14 horsepower and +17 lbs. x ft. of torque as measured on our in-house dyno. 3″ into dual 2-1/2″ mandrel bent stainless steel tubing and high flow muffler offers maximum flow, increases horsepower and torque while producing a powerful sound. Finished with dual 3 ½” black, stainless steel tips exit in front of the rear passenger tire for a unique, aggressive look.  Includes all necessary hardware and clamps for a hassle-free install.

Product Features:

• +17 ft. x lbs. TQ & +14 HP
• 409 Stainless Steel Tubing Improves Flow
• Outflows Factory Exhaust
• Unique Dual 3.5 in. Black 304 Stainless Steel Tips

The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

BORLA(R) Cat-Back(TM) and Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:

• Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive BORLA(R) Sound Of Power Respected By Motoring Enthusiasts Everywhere
• This System Features A Black Chrome Finish On T-304 Stainless Steel Tips
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• High Flow Muffler
• OE Style Hangers
• Massive 4.5 in. Out Powder Coated Exhaust tip

The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe POWER Apollo GT Series exhaust was designed with unique, aggressive look in mind. Constructed from mandrel-bent stainless steel tubing, this system provides maximum flow and an impressive sound that will quickly turns heads. This performance exhaust system includes all necessary hardware and clamps for a hassle-free install, with no cutting required, making it a true bolt on system.

Product Features:

• Constructed from Stainless Steel Tubing for Strength and Durability
• Utilizes OE-style Bayonet Hangers for a Secure Fit
• Mandrel-Bent Tubing for Smooth Transitions and Increased Power
• Stainless Clamps for Improved Sealing Surface

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• Free-Flow Muffler
• Aggressive Sound

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15318 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 4in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15318 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15318 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

Now your 19-20 Silverado/Sierra can have that custom look with this aFe POWER Apollo GT cat-back exhaust system. 3″ mandrel-bent, 409 stainless steel tubing and high-flow muffler improves performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability with a 5″ polished 304 stainless steel exhaust tip for a custom look._x000d_3″ 409 Stainless Steel Tubing: This system is constructed of durable mandrel-bent 3″ 409 stainless steel tubing for strength and durability. Mandrel-bent tubing maximizes air flow and decreases turbulence, delivering increased torque, horsepower, and improved throttle response._x000d_High-Flow Performance Muffler: A high-flow stainless steel muffler allows increased exhaust flow and reduces exhaust drone, maintaining a deep, tuned sound._x000d_Polished 5″ Tip: A 5″ polished 304 stainless steel clamp on exhaust tip, with a laser cut aFe POWER badge for a custom-styled look._x000d_Perfect Fit: Factory-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions for a secure fit._x000d_Hassle-Free Installation: No cutting or modifications required. Quality hardware and clamps are included for a hassle-free installation._x000d_This item fits: Crew Cab / Short Bed (69.92″), Crew Cab / Standard Bed (79.44″), Double Cab / Standard Bed (79.44″)_x000d_Emissions Disclaimer: This product does not require a CARB EO#_x000d_All aFe POWER exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• Constructed out of 3 mandrel-bent 409 stainless steel tubing
• Utilizes a high-flow stainless steel muffler
• Rear side-exit exhaust with 5 Polished 304 stainless steel clamp on exhaust tip
• Uses bayonet style hangers and heavy-duty band clamps for a secure fit

Exhaust Kit

Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud.
• Location-specific – engineered to fit the exhaust manifold on the front left or rear right on specified GM and Isuzu vehicles.
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Designed and manufactured to meet the needs of the exhaust system repair environment.
• Verified, tested and certified proprietary Organic coating resists corrosion.
• Tightly controlled coefficient of friction ensures reliable installation.
• Application specific kit contents
• Self-locking nuts (where applicable).

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud.
• Location-specific – engineered to fit the exhaust manifold center on specified GM and Hummer vehicles.
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud.
• Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left.
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience