1999 Chevrolet P30 Differentials

Essential 1999 Chevrolet P30 Differentials

Yukon Gear – Differential (Part No.26045)

Differential

from

$1175.00
Differential

Pro-King – Differential Internal Nest Kit (Part No.744A717)

Differential Internal Nest Kit

from

$323.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)

Dana 70 & Dana 80 Standard Open Cross Pin Shaft

from

$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 70 and 80
See More

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R14RMKLT)

Differential Master Bearing Kit - Timken

from

$176.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL 14 BLT MSTR 4.56&UP
See More

Yukon Gear – Pinion Install Kit For ’89 To ’98 10.5" GM 14 Bolt Truck Differential (Part No.13059)

Pinion Install Kit For '89 To '98 10.5" GM 14 Bolt Truck Differential

from

$404.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1989-1997 GM 10.5″ 14 bolt truck
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5"

from

$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:
  • Clutch kit
  • Fits GM 10.5″ 14 bolt truck with Eaton positraction
  • Carbon fiber clutches
See More

Yukon Gear – Bearing Race Driver (Part No.56018)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM903210 race
  • All steel construction
See More

Yukon Gear – Dana 70 & Dana 80 Pinion Gear Thrust Washer (Part No.33288)

Dana 70 & Dana 80 Pinion Gear Thrust Washer

from

$7.99
Dana 70 & Dana 80 pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 70 and 80
See More

Yukon Gear – Trac Lok Positraction Internals For Dana 80 And With 35 Spline Axles (Part No.16094)

Trac Lok Positraction Internals For Dana 80 And With 35 Spline Axles

from

$1049.99
Yukon Trac Lok positraction internals for Dana 80 and with 35 spline axles. Uses round design cross pin. (Not for Dana 60 or 70). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects. Dana 80 Trac Lok spider gears, 35spline (” round” design cross pin, NOT Dana 60 or NOT Dana 70 ).

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 80 Powr Lok positraction with 35 spline axles
  • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
See More

Yukon Gear – Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up (Part No.32173)

Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up

from

$1060.00
Yukon Performance steel spool for 8Dana 80 with 37 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 80 with 37 spline axles
  • 4.10 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Differential (Part No.26047)

Differential

from

$1168.99
Differential

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Motive Gear – Axle Shaft (Part No.MG1775)

Axle Shaft

from

$135.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:
  • AXLE SHAFT GM 10.5″ 30 SPL. 31 11/16″ L.H.
See More

FAG US – SHAFT SEAL (Part No.SS3190)

SHAFT SEAL

from

$45.49
SHAFT SEAL

Yukon Gear – Polished Aluminum Cover For 10.5" GM 14 Bolt Truck (Part No.32028)

Polished Aluminum Cover For 10.5" GM 14 Bolt Truck

from

$269.99
Polished aluminum cover for 14T GM.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • Finned polished aluminum
See More

Pro-King – Differential Ring Gear Bolt (Part No.744A935)

Differential Ring Gear Bolt

from

$1.89
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Replacement Outer Oil Baffle For Dana 80 (Part No.33004)

Replacement Outer Oil Baffle For Dana 80

from

$19.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 80
See More

Yukon Gear – Differential Cover B (Part No.33572)

Differential Cover B

from

$7.99
Differential Cover B

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 80 In A 5.38 Ratio (Part No.24325)

High Performance Replacement Ring & Pinion Gear Set For Dana 80 In A 5.38 Ratio

from

$534.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Dana Spicer 80
  • 11.25″ ring gear diameter
  • 37 spline pinion
  • 12 ring gear bolts
  • 5.38 ratio
See More

Yukon Gear – Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles (Part No.16044)

Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles

from

$315.99
Yukon standard open spider gear kit for GM 10.5″ and 14T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 10.5″ 14 bolt truck open differential
  • Includes two side gears, four pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33100)

10.5" GM 14 Bolt Truck Crush Sleeve

from

$12.99
10.5″ GM 14 bolt truck crush sleeve, 1989 & newer. Approx 0.920″ long.

Product Features:
  • Crush sleeve for 1989 and up GM 10.5″ 14 bolt truck
  • 0.920″ tall
See More

Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

14T Side Gear Thrust Washer

from

$7.99
14T side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Pro-King – Differential Pinion Nut (Part No.744A961)

Differential Pinion Nut

from

$10.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Driveworks – Wheel Bearing (Part No.S-R1581-TV)

Wheel Bearing

from

$27.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

1999 Chevrolet P30 Differentials

Maybe you’re in the middle of a full rebuild of that 1999 Chevrolet P30. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 257 different Differentials in our inventory ranging from $1.89 to $1,884.99. That means you can find the exact parts or products you need to keep that 1999 Chevrolet P30 running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1999 Chevrolet P30. Valvoline, Driveworks, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1999 Chevrolet P30, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 510 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.4 stars and Multi Purpose Seal with 4.2 stars.

So if you’re in the market for aftermarket Differentials to keep your 1999 Chevrolet P30 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1999 Chevrolet P30 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 Chevrolet P30 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your P30 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1999 Chevrolet P30 Differentials

What are the most purchased Differentials for the 1999 Chevrolet P30?

Out of 257 Differentials for the 1999 Chevrolet P30, the most popular in our inventory are:
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings

What are the top-rated 1999 Chevrolet P30 Differentials?

Top-rated Differentials for your 1999 Chevrolet P30 based on customer reviews/ratings are:
Rear Differential Cover
from $36.99
(15)
Rear Differential Cover
“For as it should”
Multi Purpose Seal
from $44.99
(5)
Multi Purpose Seal
“How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”
Bearings
from $22.99
(3)
Bearings
“works great !!!”