1999 Chevrolet K1500 Fuel Injectors

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

ACDelco GM Original Equipment Fuel Injection Pressure Regulators are mechanical valves that control fuel pressure in the fuel injector rail, and are GM-recommended replacements for your vehicle’s original components. Their spring-loaded valves return excess fuel back to the fuel tank. These original equipment fuel injection pressure regulators have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.

Precision is key for the fuel pressure regulator on any vehicle. At Delphi, we use OE engineering to test our regulators and fuel technologies to ensure the utmost performance and durability. Our Nitrile diaphragms are resilient against high-ethanol fuels, and we utilize two designs to help meet emissions standards while covering a wide array of domestic vehicles. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management. Visit our Resource Center for helpful tips and tricks on fuel pumps technologies and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Carquest Premium mass air flow (MAF) sensors are built to meet the original equipment (OE) specifications for each application. Our MAF sensors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium mass air flow sensors are 100% new and undergo extensive validation testing to ensure long-lasting performance and reliability.

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

The Edelbrock Pro-Flo 4 XT EFI Kit No. 35820 for 1986 & Earlier Small-Block Chevy engines with Vortec/E-Tec Cylinder heads has the latest technology. The EFI system comes complete with a Pro-Flo XT intake manifold and 29 Lb./Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA high-quality harness with clearly labeled connections for a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and is half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

The Edelbrock Pro-Flo 4 EFI Kit No. 35780 for Small-Block Chevy engines with Vortec/E-Tec cylinder heads is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with wire harnesses and ECU. The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads. This kit uses 29 lb/hr injectors and is rated for 450 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner application’s initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner App then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner App takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather. The E-Tuner App provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is tested on a sophisticated flow bench under multiple operating parameters.

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.

CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components.