1999 Chevrolet Corvette Suspension Parts

Name: Multi-Purpose Relay
Brand: GM Genuine Parts
SKU: 15-81106
Price: 32.99 USD

Below you will find various in-demand Chevrolet Suspension Parts, components and accessories for your 1999 Corvette. Advance Auto Parts has popular Corvette parts like Shocks and Struts, Coil and Leaf Springs, Control Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Corvette model years including 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and more. Select a category of 1999 Chevrolet Corvette Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1999 Chevrolet Corvette Suspension Parts Categories

Rear Shock and Struts

Front Shock and Struts

Active Suspension Relays

Lower Control Arms

Lower Control Arm Bushings

Lateral Arms

Leaf Spring Bushings

Suspension Control Arm Repair Kits

Air Suspension Sensor Connectors

Shock Absorber Bearings

Essential Suspension Parts for 1999 Chevrolet Corvettes

from

$32.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$26.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$217.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$245.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$328.99

aFe Control is proud to release the PFADT Series Rear Shock Spherical Bearing Kit for the 97-13 Corvette. OE factory shock bushings are soft rubber and know to deteriorate over time. Add in serious track use or a coilover conversion and they are guaranteed to fail. The aFe Control kit replaces the rubber shock bushings with mono-ball spherical joints to eliminate friction and deflection. This high quality kit features 6061-T6 aluminum bearing housings which feature a special Mil-Spec high corrosion resistant anodizing and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your Corvettes suspension.

Product Features:

TIG Welded Construction
Stainless Steel
Zerk Fittings and Grooved Bushings

from

$62.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$54.99

The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

The Correct, Monotube-Designed Orem Replacement
The KYB Gas-A-Just Helps Restore The Designed Control And Handling Of The Corvette
High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

from

$122.99

The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:

Excellent Weight Transfer
Lets Front End Down Quickly
Maximum Traction
Makes Vehicle Safer
Easier Control At End Of Track
Better Overall Stability

from

$659.99

aFe Control is proud to release the PFADT Series, Poly Control Arm Bushing Kit, for the C5 & C6 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. The aFe Control Poly Control Arm Bushing Kit, will solve this, by virtually eliminating bushing deflection, while still maintaining a quiet, comfortable ride, suitable for street use. The kit includes, light weight, hard anodized 6061 T6 aluminum sleeves, specially grooved, graphite impregnated bushings, snap rings, and all hardware necessary for a complete installation. You will appreciate the 2 piece design allowing for a much easier installation, than 1 piece designs. The aFe Control kit even include s rear, lower shock mounts, setting it apart from the competition.

Product Features:

Reduces Busing Deflection
Improves Handling For A Comfortable Ride For Track Or Street Use
6061 Anodized T6 Alum. w/Micro-Porous Surface For Great Retention
Specially Grooved Polyurethane Bushings

from

$192.99

The 461-401001-A aFe Control PFADT Series Spherical Rebuild offers the components to rebuild 1 PFADT series front upper control arm spherical bushing kit, for the 1997-2013 Chevrolet Corvette (C5/C6). If you would like to rebuild 2 front upper control arms, you will need to order 2 kits.

Product Features:

Incl. Components To Service 1 Rear Upper Control Arm
2 CNC Machined Heat Treated 17-4 PH Stainless Steel Shafts
2 Teflon Lined FK Bearings
4 Snap Rings

from

$192.99

Incl. Components To Service 1 Front Or Rear Lower Control Arm
2 Teflon Lined FK Bearings
2 Snap Rings
0.5ml Bottle Loctite 620

from

$97.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$53.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$46.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$30.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$54.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$10.99

Control Arm Bushing

from

$37.99

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$81.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$2789.00

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not re commend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

Reduces Busing Deflection
For Both Track And Street Use
Excellent Grease Retention
Quiet Operation

from

$66.99

REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$57.99

REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$1100.00

aFe Control is proud to introduce the Johnny O’Connell signature series shock package for the 2014-2015 Chevrolet Corvette C7. These Shocks are tuned by Johnny O’Connell himself and made to the exact travel and durability requirements as the OEM shocks. These are the only OEM quality replacements on the market. Perfectly matched to the Johnny O’Connell sway bars, these shocks will make for a complete transformation in your C7 Corvettes performance ride.

Product Features:

Ride Height Adjustable
Damping Adjustable For Rebound And Compression
Lightweight Hard Anodized 6061 T6 Steel Alum. Bodies
High Strength While Still Maintaining Lightweight Design

from

$81.99

REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$19.29

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$36.99

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$19.29

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$19.29

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

Upgrade your 1999 Chevrolet Corvette with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1999 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Suspension Parts are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Suspension Parts for the 1999 Chevrolet Corvette, designed to meet your needs without breaking the bank. From Shocks and Strut replacements to Coil and Leaf Springs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1999 Chevrolet Corvette at great prices. Our Suspension Parts inventory for this model ranges from just $19.29 to $2,611.00, with an average price of $352.04. Our 22 Suspension Parts in stock come from 6 trusted brands, so you’re sure to find the right part for your 1999 Chevrolet Corvette without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place. Start shopping confidently below for your 1999 Chevrolet Corvette!

Best-Selling Shocks and Struts for 1999 Chevrolet Corvettes

Enhance the driving experience in your Chevrolet with 4 quality Shocks and Strut components, starting at $81.99.

show more show less

from

$138.99

REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$81.99

REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$967.99

Ride Height Adjustable
Damping Adjustable For Rebound And Compression
Lightweight Hard Anodized 6061 T6 Steel Alum. Bodies
High Strength While Still Maintaining Lightweight Design

from

$328.99

TIG Welded Construction
Stainless Steel
Zerk Fittings and Grooved Bushings

Top Picks for 1999 Chevrolet Corvette Control Arms

Upgrade Chevrolet Corvettes with top-quality Control Arms parts, including 11 OEM and aftermarket selections for your 1999 model.

show more show less

from

$90.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$217.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$2611.00

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not recommend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

Reduces Busing Deflection
For Both Track And Street Use
Excellent Grease Retention
Quiet Operation

from

$1533.00

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to e laminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not re commend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

Mono-Ball Spherical Joints Eliminates Friction And Deflection
6061-T6 Alum. Bearing Housings w/Mil Spec
CNC Machined Heat Treated 17-4 PH Stainless Steel Shafts
CNC Machines 6061-T6 Articulation Spacers

from

$659.99

Reduces Busing Deflection
Improves Handling For A Comfortable Ride For Track Or Street Use
6061 Anodized T6 Alum. w/Micro-Porous Surface For Great Retention
Specially Grooved Polyurethane Bushings

from

$217.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$192.99

Incl. Components To Service 1 Front Upper Control Arm
2 CNC Machines 17-4 PH Stainless Steel Shaft
2 Teflon Lined FK Bearings
4 Snap Rings

from

$192.99

Incl. Components To Service 1 Front Or Rear Lower Control Arm
2 Teflon Lined FK Bearings
2 Snap Rings
0.5ml Bottle Loctite 620

from

$119.99

Incl. Components To Service 1 Rear Upper Control Arm
2 Teflon Lined FK Bearings
2 Snap Rings
0.5ml Bottle Loctite 620

from

$97.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$67.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

In-Demand Air Suspension and Kits for 1999 Chevrolet Corvettes

Select from 5 premium Air Suspension and Kits parts for your 1999 Chevrolet Corvette, with prices ranging from $23.99 to $54.99.

show more show less

from

$26.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$32.99

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$23.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$54.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$46.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

FAQs for 1999 Chevrolet Corvette Suspension Parts

Which Suspension Parts are best-sellers for 1999 Chevrolet Corvettes?

Out of 22 Suspension Parts that fit 1999 Chevrolet Corvettes, the following parts are the top sellers:

Multi-Purpose Relay (12460010) – $26.99
Multi-Purpose Relay (15730302) – $32.99
Multi-Purpose Relay (12459068) – $23.99

What’s the price range for 1999 Chevrolet Corvette Suspension Parts?

Suspension Part prices for the 1999 Chevrolet Corvette start at $19.29 and go up to $2,611.00 for the most premium parts.

What’s the average price of a Suspension Part for a 1999 Chevrolet Corvette?

The average price for Suspension Parts for the 1999 Chevrolet Corvette is $352.04. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Chevrolet Corvette model years?

Yes, we currently carry Suspension Parts for 70 model years of Chevrolet Corvettes between 1953 and 2026. Suspension Parts are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Suspension Parts for my 1999 Chevrolet Corvette?

The cheapest 1999 Chevrolet Corvette Suspension Parts we carry in stock are:

Leaf Spring Bushing Set (22907864) – $19.29
Leaf Spring Bushing Set (22907865) – $19.29
Multi-Purpose Relay (12459068) – $23.99
Multi-Purpose Relay (12460010) – $26.99
Multi-Purpose Relay (15730302) – $32.99

What are the top-rated Suspension Parts that fit the 1999 Chevrolet Corvette?

Out of 1 reviews by customers, our 1999 Chevrolet Corvette Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1999 Chevrolet Corvette and their top-rated products:

Shocks and Struts
- OESpectrum Suspension Shock Absorber (20550010) – $138.99

What types of Suspension Parts do you sell for my 1999 Chevrolet Corvette?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 1999 Chevrolet Corvette:

Can I get help with 1999 Chevrolet Corvette Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Suspension Parts and more.

What is your return policy for Chevrolet Corvette Suspension Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Chevrolet Corvette Suspension Parts

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

Dorman – Suspension Control Arm (Part No.524-460)

Dorman – Suspension Control Arm (Part No.520-903)

aFe POWER – Shock Bearing Kit (Part No.460-401005-A)

Monroe – OESpectrum Suspension Shock Absorber (Part No.5850)

KYB – High Pressure Monotube Gas Shock (Part No.KG5571)

Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)

aFe POWER – Control Arm Bushings (Part No.470-401001-B)

aFe POWER – Upper Rebuild kit (Part No.461-401003-A)

aFe POWER – Lower Rebuild kt (Part No.461-401004-A)

Dorman – Suspension Lateral Arm (Part No.527-126)

Carquest Premium – Repair Harness (Part No.PTA1176)

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)

Carquest Premium – Multi-Use Connector (Part No.PTA1826)

Carquest Premium – Multi-Use Connector (Part No.PTA1046)

Driveworks – Control Arm Bushing (Part No.DW-K5196B)

MOOG – Suspension Control Arm Bushing Kit (Part No.K304)

Energy Suspension – Control Arm Bushing Set (Part No.3.3145G)

aFe POWER – Control Arm Bearings (Part No.460-401003-A)

Monroe – OESpectrum Suspension Shock Absorber (Part No.5906)

Monroe – OESpectrum Suspension Shock Absorber (Part No.5892)

aFe POWER – Shock Set (Part No.420-401002-J)

Monroe – OESpectrum Suspension Shock Absorber (Part No.5602)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2140R)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2121G)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2104G)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2140G)

Monroe – OESpectrum Suspension Shock Absorber (Part No.5603)

Monroe – OESpectrum Suspension Shock Absorber (Part No.5602)

aFe POWER – Shock Set (Part No.420-401001-J)

aFe POWER – Shock Bearing Kit (Part No.460-401005-A)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2140R)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2140G)

Energy Suspension – Control Arm Bushing Set (Part No.3.3177R)

Dorman – Suspension Control Arm (Part No.524-460)

aFe POWER – Control Arm Bearings (Part No.460-401001-A)

aFe POWER – Control Arm Bearings (Part No.460-401002-A)

aFe POWER – Control Arm Bushings (Part No.470-401001-B)

Dorman – Suspension Control Arm (Part No.524-459)

aFe POWER – Upper Rebuild kit (Part No.461-401001-A)

aFe POWER – Lower Rebuild kt (Part No.461-401004-A)

aFe POWER – Upper Rebuild kit (Part No.461-401002-A)

Dorman – Suspension Lateral Arm (Part No.527-126)

Dorman – Suspension Control Arm Bushing (Part No.534-150)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1243)

Carquest Premium – Multi-Use Connector (Part No.PTA1046)

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)