1999 Chevrolet C1500 Suburban Performance and Racing Products
Find Your Specific 1999 Chevrolet C1500 Suburban Performance and Racing Products
Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1999 C1500 Suburban. Advance Auto Parts has popular C1500 Suburban parts like Performance Distributors, Performance Ignition Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other C1500 Suburban model years including
1994 and more. Select a category of 1999 Chevrolet C1500 Suburban Performance and Racing Products below and start saving instantly.
Popular 1999 Chevrolet C1500 Suburban Performance and Racing Products Categories
Essential Performance and Racing Products for 1999 Chevrolet C1500 Suburbans
Mr. Gasket – Intake Gasket (Part No.136G)
from
$43.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)
from
$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Steel core gasket construction
- Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)
from
$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
Rancho – RS5000 Steering Damper (Part No.RS5406)
from
$78.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
Energy Suspension – Sway Bar Bushing Set (Part No.3.5205G)
from
$41.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Motive Gear – Performance Differential Ring and Pinion (Part No.G885373)
Hurst – Manual Shifter, Competition Plus Shifter (Part No.3910002)
from
$534.99
The Hurst Competition Plus, the industry standard for over 30 years, used in dedicated applications to assure a custom fit to a wide variety of vehicles having factory consoles without any modifications.
Product Features:
See More
Product Features:
- High Ratio Pivot Mechanism
- Adjustable Bias Spring Loads
- Adjustable Stops
- Chrome Plated Steel Bolt On Stick
- Easy Installation
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Powertrax – Lock Right Locker (Part No.1921-LR)
from
$368.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
Accel – Tst GM 96-00 5.0/5.7L Vortech (Part No.TST3)
from
$236.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.
Product Features:
See More
Product Features:
- Complete Super Tune Kit
- 8mm Spiral Core Wires
- Accel Classic Core Plugs
- High Performance Cap And Rotor
- Reduced Emissions
Flowtech – Shorty; Smog Headers (Part No.91832FLT)
from
$325.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 13% More Airflow With Oiled Air Filter For Maximum Airflow (Part No.54-10732)
from
$402.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 13% cfm Flow Gain
- Increased Horsepower And Torque
Edelbrock – Engine Cylinder Head (Part No.60959)
from
$616.99Product Features:
- 170cc Intake 64cc Chamber for Vortec-Style Intake
- 20% Inc Flow Over Cast-Iron Vortec Heads
- Accept Standard or Center-Bolt Valve Covers
- Hand-Blended Intake and Exhaust Bowls
- Heli-Coils in Rocker Studs and Exhaust Bolt Holes
B & M – Holeshot 2400 (Part No.70419)
from
$609.99
HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2128R)
from
$91.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)
from
$206.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Excellent choice for large displacement vehicles
- Improved horsepower, torque and potential mileage improvement
Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)
from
$102.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)
from
$73.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Auto Ventshade (AVS) – Eclipse; Large Hood Scoops (Part No.80001)
from
$123.99
LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.
Product Features:
See More
Product Features:
- Unique, stylized hood scoops for trucks and cars
- Transform stock hood into a simulated performance hood
- Can easily be painted to match any factory color
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1796)
from
$99.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Upgrade your 1999 Chevrolet C1500 Suburban with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1999 Chevrolet C1500 Suburban, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your C1500 Suburban functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Performance and Racing Products for the 1999 Chevrolet C1500 Suburban, designed to meet your needs without breaking the bank.
From
Performance Distributor
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1999 Chevrolet C1500 Suburban at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.69 to $889.99, with
an average price of $271.57.
Our 46 Performance and Racing Products in stock come from 19 trusted brands, so you’re sure to find the right part for your 1999 Chevrolet C1500 Suburban without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Chevrolet C1500 Suburban, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, FEL-PRO Performance, Energy Suspension, and more.
K&N Performance and Racing Products
start at just $99.99 and boast an impressive 5 stars average rating from customers.
FEL-PRO Performance and Energy Suspension also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4 stars rating.
With 145 customer reviews and counting, our 1999 Chevrolet C1500 Suburban Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1999 Chevrolet C1500 Suburban is always ready to roll. We’re committed to providing you with everything you need to keep your C1500 Suburban in top shape, all in one place.
Start shopping confidently below for your 1999 Chevrolet C1500 Suburban!
Best-Selling Performance Distributors for 1999 Chevrolet C1500 Suburbans
Enhance the driving experience in your Chevrolet with 1 quality Performance Distributor components, starting at $236.99.
Accel – Tst GM 96-00 5.0/5.7L Vortech (Part No.TST3)
from
$236.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.
Product Features:
See More
Product Features:
- Complete Super Tune Kit
- 8mm Spiral Core Wires
- Accel Classic Core Plugs
- High Performance Cap And Rotor
- Reduced Emissions
Most Popular 1999 Chevrolet C1500 Suburban Performance Ignition Products
Customize your Chevrolet with 5 Performance Ignition Products products
like Performance Coils,
Performance Ignition Modules, and
Performance Ignition Parts, all
priced under $186.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Coil; GM; External Single Connector; 96-97 (Part No.8231)
from
$76.99
When it comes to late model performance parts, nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. GM single connector coil PN 8231. Used on 1996 to 1999 General Motors vehicles. Installation tip: if you plan to install an MSD Ignition with this coil, use a PN 8877 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement coil for GM 1996-1999
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Auto Ventshade (AVS) – Eclipse; Large Hood Scoops (Part No.80001)
from
$123.99
LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.
Product Features:
See More
Product Features:
- Unique, stylized hood scoops for trucks and cars
- Transform stock hood into a simulated performance hood
- Can easily be painted to match any factory color
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1999 Chevrolet C1500 Suburban Performance Engines
Upgrade Chevrolet C1500 Suburbans with top-quality Performance Engines parts, including 12 OEM and aftermarket selections for your 1999 model.
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)
from
$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)
from
$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)
from
$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)
from
$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Intake Gasket (Part No.136G)
from
$43.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)
from
$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Steel core gasket construction
- Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
- Not intended for use in emission controlled vehicles.
Edelbrock – E-Tec-170 Small-Block Chevy Cylinder Head Flat Tappet Polished (Part No.609719)
from
$889.99
The Edelbrock #609719 E-Tec Cylinder Heads are replacements for 302, 327, 350 & 400 c.i.d. S/B Chevy engines with “Vortec-style” manifolds. They feature an LT1-style raised runner intake port design for increased air-flow and ultimate performance. A uniqu
See More
B & M – Holeshot 2400 (Part No.70441)
from
$709.99
Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Edelbrock – Engine Cylinder Head (Part No.60959)
from
$616.99Product Features:
- 170cc Intake 64cc Chamber for Vortec-Style Intake
- 20% Inc Flow Over Cast-Iron Vortec Heads
- Accept Standard or Center-Bolt Valve Covers
- Hand-Blended Intake and Exhaust Bowls
- Heli-Coils in Rocker Studs and Exhaust Bolt Holes
B & M – Holeshot 2400 (Part No.70419)
from
$609.99
HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Torque Converter, Holeshot 2000 (Part No.70417)
from
$544.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
In-Demand Performance Air Filters for 1999 Chevrolet C1500 Suburbans
Select from 1 premium Performance Air Filters parts for your 1999 Chevrolet C1500 Suburban.
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1796)
from
$99.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Most Sold 1999 Chevrolet C1500 Suburban Performance Exhaust Products
Explore our best-selling Chevrolet parts for the 1999 C1500 Suburban among 4 OEM and aftermarket options starting from $31.49.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)
from
$102.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Flowtech – Shorty; Smog Headers (Part No.91832FLT)
from
$325.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)
from
$206.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Excellent choice for large displacement vehicles
- Improved horsepower, torque and potential mileage improvement
Top-Rated Performance and Racing Products Brands For Your 1999 Chevrolet C1500 Suburban
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1999 Chevrolet C1500 Suburbans. Below you’ll find some of our best rated Performance and Racing Products from K&N, FEL-PRO Performance, and Energy Suspension, and more. Performance and Racing Products from these brands that fit a 1999 C1500 Suburban start at just $9.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 1999 Chevrolet C1500 Suburban Performance and Racing Products
When it comes to maintaining or upgrading your 1999 Chevrolet C1500 Suburban, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1999 Chevrolet C1500 Suburban. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $99.99, with an average price of just $224.99. Plus, with over 43 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$349.99
$349.99
(19)
Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter
“I bought this cold air intake for my Suburban. Easy to assemble. Throttle response is much better!”
from
$99.99
$99.99
(24)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
“I have a 98 Chevrolet e/cab 1500 ful size short bed p/u with a 4.3 v6 engine. When I bought the truck I was getting 19 city 22-23 highway. After insta”
Popular FEL-PRO Performance 1999 Chevrolet C1500 Suburban Performance and Racing Products
FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1999 Chevrolet C1500 Suburban owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1999 C1500 Suburban, Advance Auto Parts carries a full inventory of 7 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $20.29 to $52.99, plus, with more than 6 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$39.49
$39.49
This product is not rated
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
“”
FAQs for 1999 Chevrolet C1500 Suburban Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1999 Chevrolet C1500 Suburbans?
Out of 46 Performance and Racing Products that fit 1999 Chevrolet C1500 Suburbans, the following parts are the top sellers:
- Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (5189543) – $39.49
- Tie Rod Dust Boot (17360821) – $9.99
- Exhaust Manifold Gasket Set (5990955) – $31.49
What’s the price range for 1999 Chevrolet C1500 Suburban Performance and Racing Products?
Performance and Racing Product prices for the 1999 Chevrolet C1500 Suburban start at $7.69 and go up to $889.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1999 Chevrolet C1500 Suburban?
The average price for Performance and Racing Products for the 1999 Chevrolet C1500 Suburban is $271.57. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet C1500 Suburban model years?
Yes, we currently carry Performance and Racing Products for 1 model years of Chevrolet C1500 Suburbans between 1994 and 1994. Performance and Racing Products are bought most frequently for the following model years: 1994.
What are the cheapest Performance and Racing Products for my 1999 Chevrolet C1500 Suburban?
The cheapest 1999 Chevrolet C1500 Suburban Performance and Racing Products we carry in stock are:
- CUP (50206003) – $7.69
- Tie Rod Dust Boot (17360821) – $9.99
- Engine Timing Cover Gasket (21021905) – $20.29
- Engine Valve Cover Gasket Set (5992664) – $23.49
- PERFORMANCE VALVE COVER GASKET SET (5189713) – $23.49
What are the top-rated Performance and Racing Products that fit the 1999 Chevrolet C1500 Suburban?
Out of 145 reviews by customers, our 1999 Chevrolet C1500 Suburban Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1999 Chevrolet C1500 Suburban and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter (17400111) – $349.99
- Performance Air Filters
- Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter (17400111) – $349.99
What types of Performance and Racing Products do you sell for my 1999 Chevrolet C1500 Suburban?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1999 Chevrolet C1500 Suburban:
Can I get help with 1999 Chevrolet C1500 Suburban Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.
What is your return policy for Chevrolet C1500 Suburban Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Chevrolet C1500 Suburban Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
