1999 BMW 328ic Wheels and Tires

Essential Wheels and Tires for 1999 BMW 328ics

Autel – 1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem (Part No.1-SENSORM)

1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem

from

$44.49
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Combined Frequency: 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – Aluminum Valve 56mm (Part No.RDV025)

Aluminum Valve 56mm

from

$10.49
Product Features:
  • Silver
  • Adjustable 0-36 degrees
  • High quality coating to prevent corrosion
  • Only one tool needed (35 in-lbs)
See More

Huf North America – TPMS Valve Assembly (Part No.O8208406087HUF)

TPMS Valve Assembly

from

$10.10
TPMS Valve Assembly

Huf North America – TPMS Valve Assembly (Part No.O8208321414HUF)

TPMS Valve Assembly

from

$12.16
TPMS Valve Assembly

McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size) (Part No.67179BK)

Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size)

from

$374.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • The bolt stem has a dacromet coating to meet O.E.M.standards.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
  • Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
  • Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
See More

McGard – Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size) (Part No.67179)

Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size)

from

$344.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • The bolt stem has a dacromet coating to meet O.E.M.standards.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
  • Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
  • Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
See More

Febi – Lug Bolt (Part No.O8020344011FEB)

Lug Bolt

from

$6.11
Lug Bolt

SKF – Wheel Bearing Circli (Part No.K8027242143SKF)

Wheel Bearing Circli

from

$5.61
Wheel Bearing Circli

Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, Spline Drive Hex Size, Chrome, 4 Pack (Part No.712-301)

Wheel Bolt: M12-1.50 Thread Size, Conical - 60 deg Seat Style, Spline Drive Hex Size, Chrome, 4 Pack

from

$16.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27179)

Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • The bolt stem has a dacromet coating to meet O.E.M. standards.
  • For use with steel or aluminum wheels with a tapered seat.
See More

FAG – Wheel Bearing (Part No.K8000458760FAG)

Wheel Bearing

from

$67.59
Wheel Bearing

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.513106)

Wheel Bearing: Direct Fit, 1 Piece

from

$106.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:
  • BUILT TO LAST — Advanced heat treatment process for strength
  • PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
  • RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Driveworks – Wheel Hub (Part No.930-250)

Wheel Hub

from

$78.99
Tough One Wheel Hubs are designed to meet or exceed original equipment (OE) standards in form, fit and function. These wheel hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Tough One Wheel Hubs. Wheel Hubs come with wheel studs, bearings are not included.

Product Features:
  • Brand may vary by location
See More

Dorman – Wheel Hub (Part No.K7000751153DOR)

Wheel Hub

from

$119.97
Wheel Hubs are an integral component of the wheel assembly, crucial to establishing the handling characteristics of your vehicle. That’s why Dorman’s industry-leading evaluation process ensures that our hubs are designed for long-lasting reliability and performance. Plus, Dorman’s vehicle try-on testing ensures a proper fit, every time.

Product Features:
  • Comes with axle nut (where applicable)
  • Sturdy steel construction
  • Bearings press onto the hubs for ease of installation
  • Quality inspection includes dimensional checks, materials testing, and hardness testing
See More

McGard – Black Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) – Box of 50 Lug Bolts (Part No.69779BK)

Black Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) - Box of 50 Lug Bolts

from

$1024.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with a tapered seat.
  • Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150.
See More

McGard – Chrome Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) – Box of 50 Lug Bolts (Part No.69779)

Chrome Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) - Box of 50 Lug Bolts

from

$759.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with a tapered seat.
  • Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150.
See More

National – Multi Purpose Seal (Part No.473823)

Multi Purpose Seal

from

$12.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-503349A)

Tapered Roller Bearing

from

$20.49
Product Features:
  • Brand may vary by location
See More

FAG US – WHEEL BEARING KIT (Part No.WB64930K)

WHEEL BEARING KIT

from

$55.99
WHEEL BEARING KIT

Dorman – Dorman Multi-Fit (Dual Freq) Programmable Tire Pressure Monitoring System Sensor (Part No.974-304)

Dorman Multi-Fit (Dual Freq) Programmable Tire Pressure Monitoring System Sensor

from

$67.99
This dual-frequency Dorman MULTi-FIT TPMS sensor covers 95% of the vehicles on the road today, including European models not covered in many competitors’ TPMS programs. Using our 974-505 MULTi-FIT II tool, the sensor can be programmed for both 315MHz and 433MHz applications on specified vehicles. The MULTi-FIT II tool can precisely and rapidly calibrate this sensor by vehicle specifications or clone it to match the sensor it’s replacing. The versatility, ease of installation and unrivaled range of vehicle coverage makes this sensor the perfect single-source repair solution. Manufactured by a brand known for more than a century for engineering excellence and quality assurance, you can install it with confidence, knowing it’s backed by a warranty you can trust. (MULTi-FIT II tool sold separately; part number 974-505).

Product Features:
  • Versatile replacement – this dual-frequency programmable TPMS sensor can replace a failed sensor on vehicles with tire pressure monitoring systems that operate on both 315 MHz and 433MHz frequencies
  • Programming required – easily calibrate this sensor with a Dorman MULTi-FIT II tool (sold separately, part number 974-505) by vehicle specifications or by cloning it to match the sensor it’s replacing
  • Direct replacement – this sensor is engineered to match the fit and function of original equipment wheels and tires, and many, but not all aftermarket wheels and tires; check fit before installing
  • Premium quality – communicating proper tire pressure is critical, and this sensor is backed by a brand with more than a century of engineering excellence and quality, with a warranty you can trust
See More

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)

315/433MHz Universal Sensor

from

$42.99
Professional installation is strongly suggested

Product Features:
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.

from

$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:
  • Includes 4 Rubber Press-in Valve Stems
  • Compatible with Autel 1-Sensors
  • Compatible with Autel 315MHz & 433MHz MX-Sensors
  • Warranty on Material and Workmanship
  • High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
See More

Huf North America – Aluminum TPMS Valve (Clamp-In) – 43mm (Part No.RDV027)

Aluminum TPMS Valve (Clamp-In) - 43mm

from

$13.29
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:
  • Complete Valve Kit for Huf OE and Aftermarket sensors
  • Includes Valve, Plastic Cap, Core, Grommet and Hex Nut
  • Flexible valve angle 0 to 36 degrees.
See More

Huf North America – Aluminum Valve 51mm (Part No.RDV024)

Aluminum Valve 51mm

from

$9.49
Product Features:
  • Silver
  • Adjustable 0-36 degrees
  • High quality coating to prevent corrosion
  • Only one tool needed (35 in-lbs)
See More

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers

from

$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:
  • MX-Sensor Components
  • 4 Metal Valves
  • 4 Rubber Valves
  • Rubber Gasket (2×10 pcs)
  • Screw Nut (2×10 pcs)
  • Washer (2×10 pcs)
  • Metal Valve Cap (2X10 pcs)
  • Rubber Valve Cap (2X10 pcs)
  • Valve Core (2X10 pcs)
See More

A.P.A. URO – Wheel Bearing Dust C (Part No.K7005285959APA)

Wheel Bearing Dust C

from

$5.91
Wheel Bearing Dust C

Upgrade your 1999 BMW 328ic with Top-Quality Wheels and Tires

When it comes to maintaining or upgrading your 1999 BMW 328ic, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Wheels and Tires are key to keeping your 328ic functioning at its best. At Advance Auto Parts, we offer a wide selection of 55 Wheels and Tires for the 1999 BMW 328ic, designed to meet your needs without breaking the bank. From Wheel Hardware replacements to Wheel Studs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Wheels and Tires for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Wheels and Tires for your 1999 BMW 328ic at great prices. Our Wheels and Tires inventory for this model ranges from just $3.29 to $7,321.99, with an average price of $232.42. Our 55 Wheels and Tires in stock come from 14 trusted brands, so you’re sure to find the right part for your 1999 BMW 328ic without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 BMW 328ic, we stock popular OEM and aftermarket Wheels and Tires from top names like Driveworks Autel, and more. Driveworks Wheels and Tires start at just $20.49 and boast an impressive 4 stars average rating from customers. With 13 customer reviews and counting, our 1999 BMW 328ic Wheels and Tires have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Wheels and Tire upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 BMW 328ic is always ready to roll. We’re committed to providing you with everything you need to keep your 328ic in top shape, all in one place. Start shopping confidently below for your 1999 BMW 328ic!

Best-Selling Wheel Hardware for 1999 BMW 328ics

Enhance the driving experience in your BMW with 12 quality Wheel Hardware components, starting at $3.29.

Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Silver (Sold by each) (Part No.610-367)

Wheel Bolt: M12-1.50 Thread Size, Conical - 60 deg Seat Style, 17 mm Hex Size, Silver (Sold by each)

from

$3.99
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:
  • Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware.
  • Durable construction – made of quality materials for safe, reliable service
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27179)

Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • The bolt stem has a dacromet coating to meet O.E.M. standards.
  • For use with steel or aluminum wheels with a tapered seat.
See More

McGard – Chrome Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) – Box of 50 Lug Bolts (Part No.69779)

Chrome Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) - Box of 50 Lug Bolts

from

$759.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with a tapered seat.
  • Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150.
See More

McGard – Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size) (Part No.67179)

Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size)

from

$344.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • The bolt stem has a dacromet coating to meet O.E.M.standards.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
  • Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
  • Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
See More

Dorman – Wheel Stud (Part No.O8060833270DOR)

Wheel Stud

from

$50.45
Wheel Stud

McGard – Black Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) – Box of 50 Lug Bolts (Part No.69779BK)

Black Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) - Box of 50 Lug Bolts

from

$1024.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with a tapered seat.
  • Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150.
See More

McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size) (Part No.67179BK)

Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size)

from

$374.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • The bolt stem has a dacromet coating to meet O.E.M.standards.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
  • Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
  • Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
See More

McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27178)

Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • The bolt stem has a dacromet coating to meet O.E.M. standards.
  • For use with steel or aluminum wheels with a tapered seat.
See More

Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, Spline Drive Hex Size, Chrome, 4 Pack (Part No.712-301)

Wheel Bolt: M12-1.50 Thread Size, Conical - 60 deg Seat Style, Spline Drive Hex Size, Chrome, 4 Pack

from

$16.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Serrated Wheel Stud (Part No.O8060833271DOR)

Serrated Wheel Stud

from

$5.31
When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:
  • Direct replacement for a proper fit every time
  • Corrosion resistant
  • Double-ended studs as well as serrated bolts, and wheel bolts available
  • Over-length and under-length studs available for convenience and ease of installation
See More

Professional Parts Sweden – Lug Bolt (Part No.O8020194316PPS)

Lug Bolt

from

$5.29
Lug Bolt

Rein – Wheel Bolt (Part No.HWB0009)

Wheel Bolt

from

$3.29
Rein OE quality wheel bolts fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original wheel bolts are identical to OEM.

Product Features:
  • Wheel bolt is produced by an OE manufacturer
  • Packaged in convenient quantities.
  • Direct replacement for correct fitments
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Most Popular 1999 BMW 328ic Wheel Studs

Customize your BMW with 1 Wheel Studs products like Wheel Studs, all priced under $6.11.

Febi – Lug Bolt (Part No.O8020344011FEB)

Lug Bolt

from

$6.11
Lug Bolt

Top Picks for 1999 BMW 328ic Wheel Bearings

Upgrade BMW 328ics with top-quality Wheel Bearings parts, including 12 OEM and aftermarket selections for your 1999 model.

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.513106)

Wheel Bearing: Direct Fit, 1 Piece

from

$106.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:
  • BUILT TO LAST — Advanced heat treatment process for strength
  • PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
  • RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.513125)

Hub and Bearing Assembly

from

$112.99
Product Features:
  • Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
  • Engineered to overcome problems and deliver smooth, reliable performance.
  • MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
  • Application specific design
See More

Driveworks – Wheel Hub Assembly (Part No.NT513125)

Wheel Hub Assembly

from

$38.99
DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.

Product Features:
  • Constructed from quality materials for extended durability
  • Integral raceway provides proper clearance between the ball and bearing riding surfaces
  • Precision-matched components deliver smooth and quiet operation
  • Manufactured to strict engineering quality standards
  • Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
  • Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
  • Brand may vary by location
See More

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-513106)

Wheel Bearing: Direct Fit, 1 Piece

from

$48.99
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:
  • Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
  • Engineered, manufactured, and tested to meet or exceed OE specifications
  • Integrated seal design improves contamination resistance for a longer bearing life
  • High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
  • Manufactured from high quality steel to maximize durability under even the harshest driving conditions
  • Brand may vary by location
See More

Driveworks – Wheel Hub (Part No.930-250)

Wheel Hub

from

$78.99
Tough One Wheel Hubs are designed to meet or exceed original equipment (OE) standards in form, fit and function. These wheel hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Tough One Wheel Hubs. Wheel Hubs come with wheel studs, bearings are not included.

Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-503349A)

Tapered Roller Bearing

from

$20.49
Product Features:
  • Brand may vary by location
See More

Dorman – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.951-851)

Wheel Bearing and Hub Assembly: Front, 5 Studs

from

$73.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.

Product Features:
  • Complete repair – this assembly includes the wheel hub and application-specific bearing components.
  • Saves time – eliminates work required to remove individual corroded components.
  • Reliable fit – precision-engineered to match the dimensions of original equipment
  • Trustworthy quality – engineered and tested in the United States
See More

FAG – Wheel Hub Assembly (Part No.K7001236769FAG)

Wheel Hub Assembly

from

$172.52
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle. The FAG wheel hub assembly is a highly integrated unit with flanges for the brake disc, wheel and knuckle, which allow the highest possible running accuracy. Integrated speed encoders generate the signals required for steering the vehicle (ABS/ESP). The bearing clamping force is applied and controlled by FAG via an orbital formed shoulder.

Product Features:
  • Original Equipment Quality
  • Maintenance free
  • Premium modified bearing steel
  • Lubricated with specially developed greases
  • Optimized sealing systems
See More

Dorman – Wheel Hub (Part No.K7000751153DOR)

Wheel Hub

from

$119.97
Wheel Hubs are an integral component of the wheel assembly, crucial to establishing the handling characteristics of your vehicle. That’s why Dorman’s industry-leading evaluation process ensures that our hubs are designed for long-lasting reliability and performance. Plus, Dorman’s vehicle try-on testing ensures a proper fit, every time.

Product Features:
  • Comes with axle nut (where applicable)
  • Sturdy steel construction
  • Bearings press onto the hubs for ease of installation
  • Quality inspection includes dimensional checks, materials testing, and hardness testing
See More

FAG – Wheel Bearing (Part No.K8000458760FAG)

Wheel Bearing

from

$67.59
Wheel Bearing

FAG US – WHEEL BEARING KIT (Part No.WB64930K)

WHEEL BEARING KIT

from

$55.99
WHEEL BEARING KIT

FAG US – WHEEL BEARING (Part No.545495AD)

WHEEL BEARING

from

$44.99
WHEEL BEARING

In-Demand TPMS Sensors for 1999 BMW 328ics

Select from 19 premium TPMS Sensors parts for your 1999 BMW 328ic, with prices ranging from $4.99 to $7,321.99.

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.

from

$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:
  • Includes 4 Rubber Press-in Valve Stems
  • Compatible with Autel 1-Sensors
  • Compatible with Autel 315MHz & 433MHz MX-Sensors
  • Warranty on Material and Workmanship
  • High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
See More

Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)

MX-Sensor 1-Sensor (Rubber)

from

$41.99
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Combined Frequency: 315MHz & 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • 100% ID clone-able with no relearn required
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Box of 4 Metal Press-in Valve Stems for 1-Sensor

from

$11.49
Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:
  • Four Metal Valve Stems
  • Press-in interchangeable metal valve stem
  • Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
  • Press release valve design allows easy installation without a tool for sensor head fitting
  • High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
See More

Huf North America – Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty (Part No.RDE001V21)

Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty

from

$109.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:
  • OE Replacement Direct-Fit TPMS Sensor 433MHz with Metal valve (clamp-in)
  • Match OE Sensors in function, design and quality.
  • No programming required. Quick installation with only a relearn process needed.
  • Just install sensor and relearn the vehicle.
  • Have WAL technology for locating tire positon.
  • Flexible valve angle 0 to 36 degrees.
  • For specific models from Alfa Romeo, Audi, Bentley, BMW, Ferrari, Maserati, Maybach, Mercedes-Benz, Porsche, VW
See More

Autel – CV-001 Black Metal Press-in Valve for 1-Sensor (Part No.CV-001)

CV-001 Black Metal Press-in Valve for 1-Sensor

from

$5.49
The CV-001 is a black metal press-in valve stem for the 1-Sensor.

Product Features:
  • Black Metal Press-in Valve Stem
  • Compatible with Autel 1-Sensor
See More

Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)

MX-Sensor 1-Sensor Bulk Box (20)

from

$462.99
The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
  • Combined Frequency: 315MHz & 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)

MX-Sensor 1-Sensor Bulk Box 240

from

$7321.99
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
  • Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
  • Combined Frequency 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Maximum Signal Strength / Battery Reliability
  • Maximum Signal Strength, Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)

MX-Sensor 1-SensorM Bulk Box (20)

from

$525.99
Product Features:
  • Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
  • Combined Frequency: 315MHz & 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – Replacement Sensor 315MHz; flexible valve 0 to 36 degrees;3 yr warranty (Part No.RDE004V21)

Replacement Sensor 315MHz; flexible valve 0 to 36 degrees;3 yr warranty

from

$109.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:
  • OE Replacement Direct-Fit TPMS Sensor 315MHz with Metal valve (clamp-in)
  • Match OE Sensors in function, design and quality.
  • No programming required. Quick installation with only a relearn process needed.
  • Just install sensor and relearn the vehicle.
  • Have WAL technology for locating tire positon.
  • Flexible valve angle 0 to 36 degrees.
  • For specific models from Audi, BMW, Ferrari, Maybach, Mercedes-Benz, Porsche
See More

Dorman – Dorman Multi-Fit (Dual Freq) Programmable Tire Pressure Monitoring System Sensor (Part No.974-304)

Dorman Multi-Fit (Dual Freq) Programmable Tire Pressure Monitoring System Sensor

from

$67.99
This dual-frequency Dorman MULTi-FIT TPMS sensor covers 95% of the vehicles on the road today, including European models not covered in many competitors’ TPMS programs. Using our 974-505 MULTi-FIT II tool, the sensor can be programmed for both 315MHz and 433MHz applications on specified vehicles. The MULTi-FIT II tool can precisely and rapidly calibrate this sensor by vehicle specifications or clone it to match the sensor it’s replacing. The versatility, ease of installation and unrivaled range of vehicle coverage makes this sensor the perfect single-source repair solution. Manufactured by a brand known for more than a century for engineering excellence and quality assurance, you can install it with confidence, knowing it’s backed by a warranty you can trust. (MULTi-FIT II tool sold separately; part number 974-505).

Product Features:
  • Versatile replacement – this dual-frequency programmable TPMS sensor can replace a failed sensor on vehicles with tire pressure monitoring systems that operate on both 315 MHz and 433MHz frequencies
  • Programming required – easily calibrate this sensor with a Dorman MULTi-FIT II tool (sold separately, part number 974-505) by vehicle specifications or by cloning it to match the sensor it’s replacing
  • Direct replacement – this sensor is engineered to match the fit and function of original equipment wheels and tires, and many, but not all aftermarket wheels and tires; check fit before installing
  • Premium quality – communicating proper tire pressure is critical, and this sensor is backed by a brand with more than a century of engineering excellence and quality, with a warranty you can trust
See More

Autel – 1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem (Part No.1-SENSORM)

1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem

from

$44.49
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Combined Frequency: 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – Adjustable Angle Programmable Universal TPMS Sensor Metal – 315MHz and 433MHz (Part No.300030)

Adjustable Angle Programmable Universal TPMS Sensor Metal - 315MHz and 433MHz

from

$43.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Maximum Signal Strength, Battery Reliability.
  • 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
  • Combined Frequency – 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Program to Replace 99 Percent of OE Sensors
  • Meets SAE Standards J1205 and J1206
  • Maximum Signal Strength, Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)

315/433MHz Universal Sensor

from

$42.99
Professional installation is strongly suggested

Product Features:
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7050)

315/433MHz Universal Sensor

from

$42.99
Professional installation is strongly suggested

Product Features:
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)

Adjustable Angle 1-Sensor Rubber

from

$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Maximum Signal Strength, Battery Reliability.
  • 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
  • Combined Frequency – 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Program to Replace 99 Percent of OE Sensors
  • Meets SAE Standards J1205 and J1206
  • Maximum Signal Strength, Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – TPMS Valve Assembly (Part No.O8208321414HUF)

TPMS Valve Assembly

from

$12.16
TPMS Valve Assembly

Huf North America – TPMS Valve Assembly (Part No.O8208406087HUF)

TPMS Valve Assembly

from

$10.10
TPMS Valve Assembly

Autel – Chrome Metal Press-in Valve for 1-Sensor (Part No.CV-003)

Chrome Metal Press-in Valve for 1-Sensor

from

$7.99
The CV-003 is a chrome metal press-in valve stem for the 1-Sensor. It comes with a warranty on material and workmanship.

Product Features:
  • Chrome Grey Metal Press-in Valve Stem
  • Compatible with Autel 1-Sensor
  • Warranty on Material and Workmanship
See More

Autel – CV-002 Titan Grey Metal Press-in Valve for 1-Sensor (Part No.CV-002)

CV-002 Titan Grey Metal Press-in Valve for 1-Sensor

from

$4.99
The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:
  • Titan Grey Metal Press-in Valve Stem
  • Compatible with Autel 1-Sensor
See More

Most Sold 1999 BMW 328ic Wheel Seals

Explore our best-selling BMW parts for the 1999 328ic among 1 OEM and aftermarket options starting from $12.29.

National – Multi Purpose Seal (Part No.473823)

Multi Purpose Seal

from

$12.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Top-Rated Wheels and Tires Brands For Your 1999 BMW 328ic

Shop for the best-rated brands offering Wheels and Tires and other products for your 1999 BMW 328ics. Below you’ll find some of our best rated Wheels and Tires from Driveworks and Autel, and more. Wheels and Tires from these brands that fit a 1999 328ic start at just $4.99 and are rated as high as 4 stars. OEM and aftermarket Wheels and Tires don’t get more top quality, durable, and affordable than from the brands below.

Popular Driveworks 1999 BMW 328ic Wheels and Tires

When it comes to maintaining or upgrading your 1999 BMW 328ic, using quality Wheels and Tires is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Wheels and Tires, specifically designed for the 1999 BMW 328ic. With over 4 Driveworks brand Wheels and Tires in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $20.49, with an average price of just $46.87. Plus, with over 5 customer reviews and an average rating of 4 stars, you can trust that our Driveworks Wheels and Tires will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Tapered Roller Bearing
from
$20.49
This product is not rated

Tapered Roller Bearing

“”

Wheel Hub
from
$78.99
This product is not rated

Wheel Hub

“”

Wheel Bearing: Direct Fit, 1 Piece
from
$48.99
This product is not rated

Wheel Bearing: Direct Fit, 1 Piece

“”

Popular Autel 1999 BMW 328ic Wheels and Tires

Autel auto parts is one of the highest quality Wheels and Tire brands in the market. Any 1999 BMW 328ic owner should feel confident when installing genuine Autel parts in their vehicle. To ensure the best fit and performance for your 1999 328ic, Advance Auto Parts carries a full inventory of 13 Autel Wheels and Tires. Plus you will be keeping your BMW in peak condition while saving money because prices on these Autel Wheels and Tires range from $4.99 to $7,321.99, plus, with more than 1 customer reviews and an impressive 1 stars average rating, you can be confident the Fram Wheels and Tires below will deliver on both quality and value.

MX-Sensor 1-Sensor (Rubber)
from
$41.99
This product is not rated

MX-Sensor 1-Sensor (Rubber)

“”

Box of 4 Metal Press-in Valve Stems for 1-Sensor
from
$11.49
This product is not rated

Box of 4 Metal Press-in Valve Stems for 1-Sensor

“”

FAQs for 1999 BMW 328ic Wheels and Tires

Which Wheels and Tires are best-sellers for 1999 BMW 328ics?

Out of 55 Wheels and Tires that fit 1999 BMW 328ics, the following parts are the top sellers:

What’s the price range for 1999 BMW 328ic Wheels and Tires?

Wheels and Tire prices for the 1999 BMW 328ic start at $3.29 and go up to $7,321.99 for the most premium parts.

What’s the average price of a Wheels and Tire for a 1999 BMW 328ic?

The average price for Wheels and Tires for the 1999 BMW 328ic is $232.42. Keep in mind the variety of part types within our Wheels and Tire category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Wheels and Tires for other BMW 328ic model years?

Yes, we currently carry Wheels and Tires for 3 model years of BMW 328ics between 1996 and 1998. Wheels and Tires are bought most frequently for the following model years: 1998, 1997, and 1996.

What are the cheapest Wheels and Tires for my 1999 BMW 328ic?

The cheapest 1999 BMW 328ic Wheels and Tires we carry in stock are:

What types of Wheels and Tires do you sell for my 1999 BMW 328ic?

Can I get help with 1999 BMW 328ic Wheels and Tire orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Wheels and Tires and more.

What is your return policy for BMW 328ic Wheels and Tires?

Advance Auto Parts keeps returns simple. For new BMW 328ic Wheels and Tires and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.