1999 BMW 323is Belts and Hoses

Below you will find various in-demand BMW Belts and Hoses, components and accessories for your 1999 323is. Advance Auto Parts has popular 323is parts like Heater Hoses, Serpentine and V Belts, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other 323is model years including 1998 and more. Select a category of 1999 BMW 323is Belts and Hoses below and start saving instantly.

Popular 1999 BMW 323is Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Hose Clamps

Fuel Hoses

Engine Oil Cooler Hoses

HVAC Heater Pipe Lines

V-Belts

AC Drive Belt Tensioners

Coolant Expansion Tank Hoses

Drive Belt Idler Assemblies

Idle Valve Air Hoses

Radiator Hose Clamps

Essential Belts and Hoses for 1999 BMW 323is

from

$45.49

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$27.11

All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Polyester fiber tensile members and a ribbed belt design.

from

$34.62

Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality. Rubber Hanger and Bracket

from

$24.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$4.11

Hose Clamp

from

$69.99

This Litens hydraulic actuator is manufactured by the Original Equipment (O.E.) supplier of this popular BMW tensioner component. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Note: Both the original part removed and this replacement hydraulic actuator are made in Germany. Caution: A low quality hydraulic actuator may leak causing damage to the belt drive system. For best results always use an OE quality actuator. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Hydraulic tensioning technology
Installation instructions included.
No Tensioner or pulley Included
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$42.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$34.02

Idle Control Valve H

from

$112.67

A/C Belt Tensioner

from

$34.79

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$37.49

Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.

Product Features:

Ideal replacement – this PCV tubing replaces the original hose on specified vehicle years, makes and models.
Durable materials – this PCV hose is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$10.99

Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$30.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$2.73

Radiator Hose Clamp

from

$178.35

Heater Pipe Line

from

$56.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$87.50

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$20.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$14.29

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$13.89

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$22.67

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$37.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$58.67

Oil Line

from

$49.99

Rein oil cooling hoses are manufactured with premium OE quality hose material designed to withstand the high pressure demands of automotive oil cooling systems. Rein oil cooling hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in oil cooling systems.

Product Features:

Manufactured with premium OE quality hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.

from

$44.09

Vacuum Hose

from

$39.00

Hose – Vacuum

Upgrade your 1999 BMW 323is with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1999 BMW 323is, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Belts and Hoses are key to keeping your 323is functioning at its best. At Advance Auto Parts, we offer a wide selection of 67 Belts and Hoses for the 1999 BMW 323is, designed to meet your needs without breaking the bank. From Heater Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1999 BMW 323is at great prices. Our Belts and Hoses inventory for this model ranges from just $2.49 to $185.23, with an average price of $40.94. Our 67 Belts and Hoses in stock come from 15 trusted brands, so you’re sure to find the right part for your 1999 BMW 323is without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 BMW 323is, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $18.29 and boast an impressive 5 stars average rating from customers. With 130 customer reviews and counting, our 1999 BMW 323is Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 BMW 323is is always ready to roll. We’re committed to providing you with everything you need to keep your 323is in top shape, all in one place. Start shopping confidently below for your 1999 BMW 323is!

Best-Selling Heater Hoses for 1999 BMW 323is

Enhance the driving experience in your BMW with 6 quality Heater Hose components, starting at $9.99.

show more show less

from

$18.29

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$34.62

from

$178.35

Heater Pipe Line

from

$15.16

All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:

All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 125C

from

$10.86

All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 125C

from

$9.99

Rein Automotive OE quality heater hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

Most Popular 1999 BMW 323is Serpentine and V Belts

Customize your BMW with 14 Serpentine and V Belts products like Serpentine Belts, Drive Belt Idler Assemblies, and V-Belts, all priced under $50.99.

show more show less

from

$50.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$30.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$24.99

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$36.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$14.29

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$20.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$43.36

Drive Belt

from

$30.66

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$27.11

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Polyester fiber tensile members and a ribbed belt design.

from

$45.59

Drive Belt

from

$36.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$30.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$23.98

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$22.92

ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

Top Picks for 1999 BMW 323is Belt Tensioners

Upgrade BMW 323is with top-quality Belt Tensioners parts, including 9 OEM and aftermarket selections for your 1999 model.

show more show less

from

$70.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

from

$69.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Hydraulic tensioning technology
Installation instructions included.
No Tensioner or pulley Included
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$185.23

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$80.99

Litens was the Original Equipment (O.E.) supplier of this BMW tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Note: BMW used 2 different tensioner suppliers for this application so the original part you replace may look different. However the form, fit, and function specifications are the same. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$112.67

A/C Belt Tensioner

from

$86.99

This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular BMW tensioner. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is designed with a pin-lock devise to hold the tensioner in the open position during installation as well as a “lift-lug” feature to assist in belt removal and installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner are marked “Made in Germany”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$49.99

This Litens hydraulic actuator is manufactured by the Original Equipment (O.E.) supplier of this popular BMW tensioner component. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Caution: A low quality hydraulic actuator may leak causing damage to the belt drive system. For best results always use an OE quality actuator. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Hydraulic tensioning technology
Installation instructions included.
No Tensioner or pulley Included
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$122.64

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$101.20

The INA Accessory Belt Tensioner shock damper is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Durable long life performance.

In-Demand Engine Cooling Hoses for 1999 BMW 323is

Select from 7 premium Engine Cooling Hoses parts for your 1999 BMW 323is, with prices ranging from $2.73 to $42.99.

show more show less

from

$30.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$30.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$42.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$19.03

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$14.49

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$10.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$2.73

Radiator Hose Clamp

Most Sold 1999 BMW 323is Fuel Hoses

Explore our best-selling BMW parts for the 1999 323is among 1 OEM and aftermarket options starting from $50.46.

show more show less

from

$50.46

Fuel Hose

Top-Rated Belts and Hoses Brands For Your 1999 BMW 323is

Shop for the best-rated brands offering Belts and Hoses and other products for your 1999 BMW 323is. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 1999 323is start at just $14.29 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1999 BMW 323is Belts and Hoses

When it comes to maintaining or upgrading your 1999 BMW 323is, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1999 BMW 323is. With over 9 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.29, with an average price of just $38.97. Plus, with over 121 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$50.99

(23)

Serpentine Idler/Tensioner Pulley; Direct Fit, 80 mm Diameter, 24.5 mm Smooth

“The part was a perfect fit for my 2005 BMW 325i. The original part ripped off from the casting which broke the belt and overheated the car. For this a”

from
$30.49

This product is not rated

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter

“”

from
$18.29

This product is not rated

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length

“”

Popular Driveworks 1999 BMW 323is Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1999 BMW 323is owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1999 323is, Advance Auto Parts carries a full inventory of 2 Driveworks Belts and Hoses. Plus you will be keeping your BMW in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $14.29 to $20.99, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$20.99

This product is not rated

Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count

“”

from
$14.29

(4)

Poly Rib Belt Serpentine Belt; 35.5 Long, 5 Rib Count

“Great produce, wonderful price!”

FAQs for 1999 BMW 323is Belts and Hoses

Which Belts and Hoses are best-sellers for 1999 BMW 323is?

Out of 67 Belts and Hoses that fit 1999 BMW 323is, the following parts are the top sellers:

Safety Stripe« Standard Straight Heater Hose (10504844) – $2.49
Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (20060938) – $36.49
Poly Rib Belt Serpentine Belt; 35.5 Long, 5 Rib Count (3290061) – $30.99

What’s the price range for 1999 BMW 323is Belts and Hoses?

Belts and Hose prices for the 1999 BMW 323is start at $2.49 and go up to $185.23 for the most premium parts.

What’s the average price of a Belts and Hose for a 1999 BMW 323is?

The average price for Belts and Hoses for the 1999 BMW 323is is $40.94. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other BMW 323is model years?

Yes, we currently carry Belts and Hoses for 1 model years of BMW 323is between 1998 and 1998. Belts and Hoses are bought most frequently for the following model years: 1998.

What are the cheapest Belts and Hoses for my 1999 BMW 323is?

The cheapest 1999 BMW 323is Belts and Hoses we carry in stock are:

Safety Stripe« Standard Straight Heater Hose (10504844) – $2.49
Radiator Hose Clamp (11814561) – $2.73
Clamp – Hose (12147339) – $3.34
Clamp – Hose (11985745) – $3.82
Hose Clamp (11966076) – $4.11

What are the top-rated Belts and Hoses that fit the 1999 BMW 323is?

Out of 130 reviews by customers, our 1999 BMW 323is Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1999 BMW 323is and their top-rated products:

Belt Tensioners
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457846) – $69.99
- Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (20130255) – $70.99
Serpentine and V Belts
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457846) – $69.99
- Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (20130255) – $70.99

What types of Belts and Hoses do you sell for my 1999 BMW 323is?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1999 BMW 323is:

Can I get help with 1999 BMW 323is Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Belts and Hoses and more.

What is your return policy for BMW 323is Belts and Hoses?

Advance Auto Parts keeps returns simple. For new BMW 323is Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 BMW 323is Belts and Hoses

Dorman – Idler/Tensioner Pulley: Specific Fit, Polyamide, 70 mm Diameter (Part No.419-657)

ContiTech – Drive V-Belt (Part No.W1000433669CON)

Vaico – Heater Hose Junction (Part No.R3029340700VCO)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

CRP – Hose Clamp (Part No.Y3063860147CRP)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999067A)

Gates – Premium Molded Coolant Hose (Part No.22440)

Rein – Idle Control Valve H (Part No.C4031268030RIN)

INA – A/C Belt Tensioner (Part No.R108831911INA)

Rein – Expansion Tank Hose (Part No.G2030264079RIN)

Dorman – Help – PCV Breather Hose (Part No.46046)

Rein – Radiator Hose (Part No.CHR0014R)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter (Part No.C71663)

Rein – Radiator Hose Clamp (Part No.G2010307541RIN)

Vaico – Heater Pipe Line (Part No.R305572904VCO)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.5 mm Smooth (Part No.89046)

INA – Accessory Belt Tensioner Assembly (Part No.G600166915INA)

Driveworks – Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (Part No.613K6)

Driveworks – Poly Rib Belt Serpentine Belt; 35.5 Long, 5 Rib Count (Part No.355K5)

Rein – Cooling Hose (Part No.G2021126664RIN)

Rein – Rein Radiator Hose (Part No.G200034178RIN)

Gates – Premium Molded Coolant Hose (Part No.22439)

APA/URO Parts – Oil Line (Part No.A6050242150APA)

Rein – Oil Cooler Hose Assembly (Part No.FHA0001)

CRP – Vacuum Hose (Part No.B2020281448CRP)

Rein – Hose – Vacuum (Part No.4L20027654RIN)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.80413)

Vaico – Heater Hose Junction (Part No.R3029340700VCO)

Vaico – Heater Pipe Line (Part No.R305572904VCO)

APA/URO – APA/URO Heater Hose (Part No.R303081908APA)

APA/URO – APA/URO Heater Hose (Part No.R303081907APA)

Rein – Heater Hose (Part No.CHH0140R)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 80 mm Diameter, 24.5 mm Smooth (Part No.89089)

Dayco – Poly Rib Belt Serpentine Belt; 35.5 Long, 5 Rib Count (Part No.5050355)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

Dayco – Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (Part No.5060613)

Driveworks – Poly Rib Belt Serpentine Belt; 35.5 Long, 5 Rib Count (Part No.355K5)

Driveworks – Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (Part No.613K6)

Bando – Drive Belt (Part No.W10001529972BAN)

Mitsuboshi – Drive Belt (Part No.W1000532668MBL)

ContiTech – Drive V-Belt (Part No.W1000433669CON)

Bando – Drive Belt (Part No.W10002440667BAN)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060612)

Gates – Micro-V« Serpentine Drive Belt (Part No.K050355)

Bando – Multi Rib (Serpentine) Belt (Part No.W1000109198BAN)

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100056320CON)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89342)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999067A)

INA – Acc. Belt Tensioner (Part No.G60011674465INA)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999141A)

INA – A/C Belt Tensioner (Part No.R108831911INA)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999058A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999063A)

INA – Accessory Belt Tensioner Assembly (Part No.G6001283391INA)

INA – Accessory Belt Tensioner Shock Damper (Part No.G600031908INA)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter (Part No.C71663)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter (Part No.B71664)

Gates – Premium Molded Coolant Hose (Part No.22440)

Rein – Rein Radiator Hose (Part No.G200066680RIN)

Rein – Radiator Hose (Part No.CHR0016R)

Rein – Radiator Hose (Part No.CHR0014R)

Rein – Radiator Hose Clamp (Part No.G2010307541RIN)

CRP – Fuel Hose (Part No.E5000285160CRP)