1998 Volkswagen Beetle Belts and Hoses
More 1998 Volkswagen Beetle Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 1998 Volkswagen Beetle, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 1998 Volkswagen Beetle Belts and Hoses
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 15 1/2 Inch Length (Part No.88439)
from
$30.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Bando – Multi Rib (Serpentine) Belt (Part No.W100027667BAN)
from
$13.29
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
ContiTech – Diesel Injection Hose (Part No.D103024165CON)
from
$20.37
ContiTech develop and produce complete line systems from the tank through to the engine. The systems comply are cost-efficient and easy-to-install. ContiTech special competence is the manufacture of tight connections between hoses, pipes and fittings and the assemblies to which these are hooked up. Safe and reliable parts are the result. The product range includes supply and return lines and ventilation lines.
Product Features:
See More
Product Features:
- OE Quality
- Good AdBlue resistance
- Safe and reliable
Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89670)
from
$144.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.
Product Features:
See More
Product Features:
- Endures the toughest conditions while promoting quieter performance and longer life
- Features a steel pivot tube on specific designs for enhanced stability
- Built to outperform and outlast competitive OE parts
- Rust resistant construction
APA/URO Parts – Coolant Coupling (Part No.G2022450968APA)
from
$5.75
The APA/URO Coolant Water Outlet is manufactured to OE Quality and has improved durability and resistance to heat and cracking.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Hoses slide on for easy installation
- High-quality plastic or metal construction
Dorman – Coolant Hose Connector (Part No.902-5424)
from
$31.99
This radiator coolant hose connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this radiator coolant hose connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 65mm Dia., 24.5mm Width, Smooth (Part No.89161)
from
$20.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today.
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38018)
from
$25.99
Product Features:
See More
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 26 mm Smooth (Part No.89017)
from
$40.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 78 mm Diameter (Part No.419-666)
from
$44.49
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
Product Features:
See More
Product Features:
- Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
- Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
- Application specific – reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality – backed by team of engineers and quality specialists in the United States
Dorman – Help – PCV Breather Hose- PCV Valve To Oil Filter Housing (Part No.46075)
from
$13.29
Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.
Product Features:
See More
Product Features:
- Ideal replacement – this PCV tubing replaces the original hose on specified vehicle years, makes and models
- Durable materials – this PCV hose is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Dorman – Help – Breather Tube (Part No.55554)
from
$32.99
Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.
Product Features:
See More
Product Features:
- Ideal replacement – this PCV tubing replaces the original hose on specified vehicle years, makes and models
- Durable materials – this PCV hose is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Kayser – Booster Vacuum Hose (Part No.N4020266381KAY)
from
$92.15
Booster Vacuum Hose
Vaico – Booster Vacuum Hose (Part No.N4020451834VCO)
from
$104.81
The Vaico Booster Vacuum Hose is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Vaico – Molded Radiator Hose (Part No.G2000163997VCO)
from
$67.07
The high quality VAICO Coolant Hoses protect the components in the water cooling circuit from corrosion. Thanks to the high-quality materials in accordance with OE, VAICO guarantees the best quality with an assortment of more than 1,000 Coolant Hoses. The Vaico line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.
Product Features:
See More
Product Features:
- Quick, easy mounting: quick connector from German production
- All cooling-water hose inner linings are resistant to electrochemical cracking
- Material: according to OEM. (CR, AEM, HAT-ACM, FKM / VMO), fabric reinforcement Kevlar
- high strength and resistance to oil, mud, salt, road debris, and ozone
- Quality Assurance: Perform various tests, including endurance, cold fexibility and vacuum tests as well as leak and residue tests
Gates – Premium Molded Coolant Hose (Part No.21532)
from
$26.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Poly Rib Belt Serpentine Belt; 42.32 Long, 6 Rib Count (Part No.5060423)
from
$27.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
- Made in the USA
Driveworks – Double Sided Poly Rib Belt Serpentine Belt; 61.22 Long, 5 Rib Count (Part No.612KK5)
from
$55.99
The Driveworks double sided v-belt is designed for multiple accessory drives requiring the transmission of power from both sides of the belt. This belt is made with a specialized rubber compound that incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.75" Long, 1.25" Diameter (Part No.E72740)
from
$127.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
OES Genuine – Radiator Hose (Part No.G2000318442)
from
$41.38
Radiator Hose
APA/URO Parts – C Clip Retainer (Part No.G2050240713APA)
from
$1.30
C Clip Retainer
Febi – Febi Radiator Hose (Part No.G2000106354FEB)
from
$85.69
Febi engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Febi line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.
Product Features:
See More
Product Features:
- All cooling-water hose inner linings are resistant to electrochemical cracking
- high strength and resistance to oil, mud, salt, road debris, and ozone
- Resistance to distilled water and water ethylene glycol mixtures
- Resistance to air temperatures of up to 125C
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23" Long, 1.25" Diameter (Part No.E72009)
from
$36.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)
from
$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Popular 1998 Volkswagen Beetle Belts and Hoses Categories
1998 Volkswagen Beetle Belts and Hoses
You count on your 1998 Volkswagen Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 58 Belts and Hoses ranging in price from $1.30 to $189.99, you’re sure to find everything you need for your 1998 Volkswagen Beetle.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 16 different brands like Dayco, Litens, and Gates. 1998 Volkswagen Beetle Belts and Hoses start as low as $1.30!
One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 325 extensive product reviews on 1998 Volkswagen Beetle Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Coolant Hose Connector with 4.6 stars and O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 65 mm Diameter with 5.0 stars.
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1998 Volkswagen Beetle below to get started!
Top-Rated Belts and Hoses Brands For Your 1998 Volkswagen Beetle
Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Volkswagen Beetle running right for years to come. In our inventory you’ll find brands like Dayco, Litens, Gates, and even more.
Popular Driveworks Belts and Hoses
You’ll find popular Driveworks brand products across Serpentine and V Belts. All are waiting to get your 1998 Volkswagen Beetle back on the road. Some of the top-rated Driveworks products in these categories are:
from
$20.99
(2)
Double Sided Poly Rib Belt Serpentine Belt; 47.05 Long, 6 Rib Count
Serpentine Belts
Top-Rated Dayco Belts and Hoses
If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 1998 Volkswagen Beetle, and some of our most reviewed Dayco parts include:
from
$29.99
(251)
Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth
Drive Belt Idler Assemblies
from
$35.49
(37)
Double Sided Poly Rib Belt Serpentine Belt; 47.05 Long, 6 Rib Count
Serpentine Belts
FAQs for 1998 Volkswagen Beetle Belts and Hoses
What are the most purchased Belts and Hoses for the 1998 Volkswagen Beetle?
Out of 58 Belts and Hoses for the 1998 Volkswagen Beetle, the most popular in our inventory are:
from
$29.99
(7)
O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 70 mm Diameter
Idler Pulleys
from
$1.79
This product is not rated
Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)
Heater Hoses
What are the top-rated 1998 Volkswagen Beetle Belts and Hoses?
Top-rated Belts and Hoses for your 1998 Volkswagen Beetle based on customer reviews/ratings are:
from
$64.99
(2)
O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 65 mm Diameter
“Good product (good price) with a fast, simple headache-free experience. Thanks.”
from
$73.99
(2)
Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts
“Exact copy of what I took off, even had vw part numbers in the cast body. The shock appears to be generic made in USA brand. Didn’t take bearing o”
