1998 Saab 900 Engine Parts

Essential Engine Parts for 1998 Saab 900s

Rotomaster – Turbocharger (Part No.A8250106R)

Turbocharger

from

$785.99
Product Features:
  • All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
  • Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
  • All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
  • 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
  • Each unit comes with a pre-lube syringe to ensure product protection during installation.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Meets or exceeds O.E. performance.
  • Comes with a pre-lube syringe to ensure product protection during installation.
See More

Ajusa – Cylinder Head Bolt Set (Part No.81012000)

Cylinder Head Bolt Set

from

$47.99
AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:
  • AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
  • All kits are application specific.
  • Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
  • Each set comes with special assembly lube to ensure proper torque when tightening.
  • All kits are boxed and shrink wrapped.
See More

Cardone New – Turbocharger Cartridge (Part No.2N-1006CHR)

Turbocharger Cartridge

from

$503.99
When turbochargers fail, the common response is the replacement of the entire unit. However, the damage is often isolated within the turbo cartridge, which contains the core components of the turbo assembly. By replacing just the cartridge, the remaining components can be salvaged and repair times reduced. CARDONE cartridges are assembled with O.E.-grade components to ensure high performance and durability.

Product Features:
  • Eliminates the need to replace the entire turbocharger
  • Allows for reuse of the original compressor and turbine housings
  • Direct O.E. replacement
  • Allows for replacement of turbocharger without the need for balancing
  • Supplied with O.E.-grade components for durability
See More

Febi – Timing Guide Rail (Part No.A5040280347FEB)

Timing Guide Rail

from

$18.56
Timing Guide Rail

Professional Parts Sweden – Balance Shaft Gear (Part No.A5102281139PPS)

Balance Shaft Gear

from

$44.09
Balance Shaft Gear

Sealed Power – Assembly Lubricant (Part No.55-400)

Assembly Lubricant

from

$10.29
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Formulated for prelubrication cam lobes, lifters & engine bearings
  • Increases load carrying capacity
  • Holds fast to surfaces
  • Exacting tolerances
  • Meets or exceeds OEM specifications
  • 4.0 oz. Squeeze Container
See More

Professional Parts Sweden – Cam Plug (Part No.A8031227689PPS)

Cam Plug

from

$5.81
The Professional Parts Sweden Cam Plug is manufactured using the highest quality materials and is designed to withstand high temperatures.

Product Features:
  • Stays cool at high temperatures
  • Designed to seal minor surface irregularities
  • No re-torque required
See More

Iwis – Balance Shaft Chain (Part No.A510132138IWI)

Balance Shaft Chain

from

$88.19
Balance Shaft Chain

Vemo – Crank Position Sensor (Part No.A2255397744VMO)

Crank Position Sensor

from

$78.25
The Vemo Crank Position Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

National – Shaft Repair Sleeve (Part No.99187)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Redi-Sleeve (Part No.99353)

Redi-Sleeve

from

$82.99
Redi-Sleeve

Professional Parts Sweden – Camshaft Gear (Part No.A5130186838PPS)

Camshaft Gear

from

$68.01
Camshaft Gear

Professional Parts Sweden – Oil Pump Kit (Part No.A61701869235PPS)

Oil Pump Kit

from

$81.34
Oil Pump Kit

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72682)

Engine Valve Stem Oil Seal Set

from

$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Professional Parts Sweden – PPS Timing Chain Tensioner (Part No.A511021773PPS)

PPS Timing Chain Tensioner

from

$83.32
The PPS Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision tension assembly
  • OE specified guide rail when supplied
  • Durable long life performance
See More

Febi – Timing Chain (Part No.A510031630FEB)

Timing Chain

from

$108.32
Timing Chain

Elring – Valve Cover Gasket Set (Part No.A802938001ELR)

Valve Cover Gasket Set

from

$40.14
WARNING: This item cannot be returned for a replacement or refund if opened! Elring valve cover gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring valve cover gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:
  • High-quality design and engineering for perfect performance
  • Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
  • Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation
See More

Glyco – Glyco Main Bearing Set (Part No.A2010379773GLY)

Glyco Main Bearing Set

from

$86.25
Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:
  • Original Equipment Quality
  • Excellent wear resistance
  • Low propensity to seize
  • Reduction in Friction
See More

Dorman – Engine Oil Pan: Direct Fit, Aluminum, Center Sump (Part No.264-800)

Engine Oil Pan: Direct Fit, Aluminum, Center Sump

from

$139.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this engine oil pan is made to match the original pan on specific vehicles.
  • Complete assembly – includes replacement pan and drain plugs to match original components.
  • Durable design – high-strength coating prevents future corrosion
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Professional Parts Sweden – Engine Oil Dipstick (Part No.A1110187056PPS)

Engine Oil Dipstick

from

$20.09
This OE quality oil dipstick is manufactured to meet OEM specifications for form, fit and function.

Product Features:
  • Original Equipment fit, form and function
  • Manufactured from high quality materials
  • Right fit the first time
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.26431 PT)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$50.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
See More

Carquest Premium – A/C Compressor Cut-Out Switch Harness Connector (Part No.ABA3459)

A/C Compressor Cut-Out Switch Harness Connector

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Victor Reinz – Engine Oil Pump Gasket (Part No.41-73242-00)

Engine Oil Pump Gasket

from

$12.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Elring – Cylinder Head Gasket Set (Part No.A801055624ELR)

Cylinder Head Gasket Set

from

$92.56
WARNING: This item cannot be returned for a replacement or refund if opened! Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials. All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions. Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:
  • Produced from spring steel for long-lasting flexibility of beads
  • Thermal stability up to 600F
  • Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
  • Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
  • Tightening instructions provided with each gasket for perfect results
See More

Glyco – Glyco Rod Bearing Set (Part No.A2030389027GLY)

Glyco Rod Bearing Set

from

$91.05
Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:
  • Original Equipment Quality
  • Excellent wear resistance
  • Low propensity to seize
  • Reduction in Friction
See More

Meistersatz – Oil Pick-up Tube O-R (Part No.A6272187016MEI)

Oil Pick-up Tube O-R

from

$2.79
Oil Pick-up Tube O-R

CRP – Oil Pump Seal (Part No.A616056706)

Oil Pump Seal

from

$4.52
Oil Pump Seal

Upgrade your 1998 Saab 900 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1998 Saab 900, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Saab or enhancing its overall performance, Engine Parts are key to keeping your 900 functioning at its best. At Advance Auto Parts, we offer a wide selection of 69 Engine Parts for the 1998 Saab 900, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1998 Saab 900 at great prices. Our Engine Parts inventory for this model ranges from just $2.79 to $785.99, with an average price of $69.15. Our 69 Engine Parts in stock come from 29 trusted brands, so you’re sure to find the right part for your 1998 Saab 900 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Saab 900, we stock popular OEM and aftermarket Engine Parts from top names like National Driveworks, and more. National Engine Parts start at just $11.99 and boast an impressive 4 stars average rating from customers. With 225 customer reviews and counting, our 1998 Saab 900 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Saab 900 is always ready to roll. We’re committed to providing you with everything you need to keep your 900 in top shape, all in one place. Start shopping confidently below for your 1998 Saab 900!

Best-Selling Camshafts for 1998 Saab 900s

Enhance the driving experience in your Saab with 5 quality Camshaft components, starting at $5.81.

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Multi Purpose Seal (Part No.223830)

Multi Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Carquest Premium – A/C Compressor Cut-Out Switch Harness Connector (Part No.ABA3459)

A/C Compressor Cut-Out Switch Harness Connector

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

ABS Wheel Speed Sensor Connector

from

$12.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Professional Parts Sweden – Cam Plug (Part No.A8031227689PPS)

Cam Plug

from

$5.81
The Professional Parts Sweden Cam Plug is manufactured using the highest quality materials and is designed to withstand high temperatures.

Product Features:
  • Stays cool at high temperatures
  • Designed to seal minor surface irregularities
  • No re-torque required
See More

Most Popular 1998 Saab 900 Engine Gaskets and Seals

Customize your Saab with 12 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Rear Main Seal Sets, all priced under $76.99.

National – Multi Purpose Seal (Part No.3772)

Multi Purpose Seal

from

$21.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50409 R)

Engine Valve Cover Gasket Set

from

$46.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 1 Piece Set (Part No.OS 30809)

Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 1 Piece Set

from

$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
  • OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
See More

Victor Reinz – Engine Oil Pan Gasket Set (Part No.10-10305-01)

Engine Oil Pan Gasket Set

from

$76.99
Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Engine Conversion Gasket Set (Part No.08-12102-01)

Engine Conversion Gasket Set

from

$75.99
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, 2 Pieces (Part No.15-35281-02)

Molded Rubber Valve Cover Gasket Set: Direct Fit, 2 Pieces

from

$53.99
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds OE specifications
  • Zero engine leakage for late model vehicles.
See More

Elring – Valve Cover Gasket Set (Part No.A802938001ELR)

Valve Cover Gasket Set

from

$40.14
WARNING: This item cannot be returned for a replacement or refund if opened! Elring valve cover gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring valve cover gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:
  • High-quality design and engineering for perfect performance
  • Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
  • Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation
See More

Felpro – Upper Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 1 Piece Set (Part No.OS 30659)

Upper Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 1 Piece Set

from

$29.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
  • OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72682)

Engine Valve Stem Oil Seal Set

from

$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Victor Reinz – Engine Oil Pump Gasket (Part No.41-73242-00)

Engine Oil Pump Gasket

from

$12.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-26058-03)

Engine Valve Stem Oil Seal Set

from

$8.99
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Low friction, Minimum power consumption, High chemical resistance, Low breakaway torque after standstill.
  • Able to be used in applications with minimal lubrication.
  • Thermal properties with a wide range of operating temperatures.
See More

Meistersatz – Valve Stem Seal (Part No.A807012825MEI)

Valve Stem Seal

from

$7.92
Valve Stem Seal

Top Picks for 1998 Saab 900 Engine Timing Parts

Upgrade Saab 900s with top-quality Engine Timing Parts parts, including 13 OEM and aftermarket selections for your 1998 model.

National – Shaft Repair Sleeve (Part No.99187)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Engine Harmonic Balancer Repair Sleeve (Part No.88187)

Engine Harmonic Balancer Repair Sleeve

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Made of stainless steel
  • Designed to prevent timing cover seal leaks
  • Takes up gaps caused by worn-out harmonic balancer shafts
See More

Febi – Timing Chain (Part No.A510031630FEB)

Timing Chain

from

$108.32
Timing Chain

Iwis – Balance Shaft Chain (Part No.A510132138IWI)

Balance Shaft Chain

from

$88.19
Balance Shaft Chain

Professional Parts Sweden – PPS Timing Chain Tensioner (Part No.A511021773PPS)

PPS Timing Chain Tensioner

from

$83.32
The PPS Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision tension assembly
  • OE specified guide rail when supplied
  • Durable long life performance
See More

TSU – Balance Shaft Chain (Part No.A510132138TSU)

Balance Shaft Chain

from

$76.68
Balance Shaft Chain

Professional Parts Sweden – Camshaft Gear (Part No.A5130186838PPS)

Camshaft Gear

from

$68.01
Camshaft Gear

Professional Parts Sweden – Balance Shaft Gear (Part No.A5102281139PPS)

Balance Shaft Gear

from

$44.09
Balance Shaft Gear

Professional Parts Sweden – Balance Shaft Gear (Part No.A51021870096PPS)

Balance Shaft Gear

from

$41.16
Balance Shaft Gear

Professional Parts Sweden – Timing Guide Rail (Part No.A5040280351PPS)

Timing Guide Rail

from

$39.19
Timing Guide Rail

Professional Parts Sweden – Balance Shaft Gear (Part No.A5102186886PPS)

Balance Shaft Gear

from

$34.45
Balance Shaft Gear

Professional Parts Sweden – Crankshaft Gear (Part No.A5010186822PPS)

Crankshaft Gear

from

$29.69
Crankshaft Gear

Febi – Timing Guide Rail (Part No.A5040280347FEB)

Timing Guide Rail

from

$18.56
Timing Guide Rail

In-Demand Valve Cover and Cylinder Heads for 1998 Saab 900s

Select from 4 premium Valve Cover and Cylinder Heads parts for your 1998 Saab 900, with prices ranging from $47.99 to $94.99.

Ajusa – Cylinder Head Bolt Set (Part No.81012000)

Cylinder Head Bolt Set

from

$47.99
AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:
  • AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
  • All kits are application specific.
  • Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
  • Each set comes with special assembly lube to ensure proper torque when tightening.
  • All kits are boxed and shrink wrapped.
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 26431 PT)

Cylinder Head Gasket Set

from

$94.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.26431 PT)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$50.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
See More

Elring – Cylinder Head Gasket Set (Part No.A801055624ELR)

Cylinder Head Gasket Set

from

$92.56
WARNING: This item cannot be returned for a replacement or refund if opened! Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials. All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions. Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:
  • Produced from spring steel for long-lasting flexibility of beads
  • Thermal stability up to 600F
  • Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
  • Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
  • Tightening instructions provided with each gasket for perfect results
See More

Most Sold 1998 Saab 900 Engine Mounts

Explore our best-selling Saab parts for the 1998 900 among 5 OEM and aftermarket options starting from $79.59.

Anchor – Engine Mount: Rear, 1 Piece (Part No.9291)

Engine Mount: Rear, 1 Piece

from

$94.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to SAAB 96-03;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1996-2003
  • Weight approx: 2 Lbs
  • HYDRAULIC
See More

Professional Parts Sweden – Engine Mount (Part No.A7000934927PPS)

Engine Mount

from

$79.59
The PPS Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce engine vibration and noise.
See More

Dorman – Suspension Engine Mount (Part No.523-108)

Suspension Engine Mount

from

$222.99
This replacement engine mount is precision-engineered and rigorously tested to match the fit and function of the original engine mount on specific vehicle applications.

Product Features:
  • Direct replacement – this engine mount has been reverse-engineered to match the fit and function of the stock engine mount on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of the original part
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Professional Parts Sweden – Engine Mount (Part No.A7000934926PPS)

Engine Mount

from

$89.91
The PPS Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce engine vibration and noise.
See More

APA/URO Parts – Engine Mount (Part No.A7000934926APA)

Engine Mount

from

$86.20
The APA/URO Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce engine vibration and noise.
See More

Top-Rated Engine Parts Brands For Your 1998 Saab 900

Shop for the best-rated brands offering Engine Parts and other products for your 1998 Saab 900s. Below you’ll find some of our best rated Engine Parts from National and Driveworks, and more. Engine Parts from these brands that fit a 1998 900 start at just $11.49 and are rated as high as 4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1998 Saab 900 Engine Parts

When it comes to maintaining or upgrading your 1998 Saab 900, using quality Engine Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Engine Parts, specifically designed for the 1998 Saab 900. With over 6 National brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99, with an average price of just $32.21. Plus, with over 16 customer reviews and an average rating of 4 stars, you can trust that our National Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Engine Harmonic Balancer Repair Sleeve
from
$11.99

(2)

Engine Harmonic Balancer Repair Sleeve

“This was needed for an off-label application, and has done the job perfectly. Service was outstanding, as always!”

Shaft Repair Sleeve
from
$63.99
This product is not rated

Shaft Repair Sleeve

“”

Shaft Repair Sleeve
from
$41.99

(1)

Shaft Repair Sleeve

“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”

Popular Driveworks 1998 Saab 900 Engine Parts

Driveworks auto parts is one of the highest quality Engine Part brands in the market. Any 1998 Saab 900 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1998 900, Advance Auto Parts carries a full inventory of 2 Driveworks Engine Parts. Plus you will be keeping your Saab in peak condition while saving money because prices on these Driveworks Engine Parts range from $11.49 to $12.99, plus, with more than 87 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

Oil Seal
from
$11.49

(87)

Oil Seal

“Fit perfectly, great product”

Crankshaft Seal
from
$12.99
This product is not rated

Crankshaft Seal

“”

FAQs for 1998 Saab 900 Engine Parts

Which Engine Parts are best-sellers for 1998 Saab 900s?

Out of 69 Engine Parts that fit 1998 Saab 900s, the following parts are the top sellers:

What’s the price range for 1998 Saab 900 Engine Parts?

Engine Part prices for the 1998 Saab 900 start at $2.79 and go up to $785.99 for the most premium parts.

What’s the average price of a Engine Part for a 1998 Saab 900?

The average price for Engine Parts for the 1998 Saab 900 is $69.15. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Saab 900 model years?

Yes, we currently carry Engine Parts for 19 model years of Saab 900s between 1979 and 1997. Engine Parts are bought most frequently for the following model years: 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1990, and 1989.

What are the cheapest Engine Parts for my 1998 Saab 900?

The cheapest 1998 Saab 900 Engine Parts we carry in stock are:

What are the top-rated Engine Parts that fit the 1998 Saab 900?

Out of 225 reviews by customers, our 1998 Saab 900 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1998 Saab 900 and their top-rated products:

What types of Engine Parts do you sell for my 1998 Saab 900?

Can I get help with 1998 Saab 900 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Saab Engine Parts and more.

What is your return policy for Saab 900 Engine Parts?

Advance Auto Parts keeps returns simple. For new Saab 900 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.