1998 Oldsmobile Bravada Drive Shafts and Axles

Essential 1998 Oldsmobile Bravada Drive Shafts and Axles

Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)

C/Clip For GM 7.5", 7.6" & 8"

from

$14.99
Product Features:
  • c-clip for GM 7.5″, 7.625″ and 8.0″
See More

Yukon Gear – Axle Seal For 5707 Or 1563 Bearing (Part No.30196)

Axle Seal For 5707 Or 1563 Bearing

from

$6.99
Axle seal for 5707 OR 1563 bearing.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • 2.250″ O.D.
See More

Dorman – Driveshaft Slip Yoke (Part No.697-557)

Driveshaft Slip Yoke

from

$152.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
  • Effective fix – replacement restores safe, smooth driveline operation
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Yukon Gear – Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design (Part No.41090)

Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design

from

$184.99
Yukon yoke for GM 7.5″ (mech 3R) in a triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 7.5″ and 7.625″
  • 27 spline
  • Mechanics 3R u-joint size
  • Inside snap ring design
  • 2.556″ snap ring span
  • 1.125″ cap diameter
  • Strap style
See More

Dorman – Spindle Nut (Part No.K1002831647DOR)

Spindle Nut

from

$5.57
Spindle Nut

Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

Axle Repair Bearing

from

$16.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Clutch Release Bearing (Part No.S-SCH-208)

Clutch Release Bearing

from

$8.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Thrust Washer Kit For GM 7.2" IFS Stub Shaft (Part No.33526)

Thrust Washer Kit For GM 7.2" IFS Stub Shaft

from

$46.99
Product Features:
  • Thrust washer kit
  • Fits GM 7.2″ IFS
See More

National – Multi Purpose Bearing (Part No.HB-88107-A)

Multi Purpose Bearing

from

$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Ball Bearing (Part No.S-HB-88107-A)

Ball Bearing

from

$19.99
Value-priced bearing meets all cataloged application requirements.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Axle Shaft Lock Assortment

from

$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • COMPLETE MOUNT
See More

SKF – Driveshaft Support with Bearing (Part No.K1030285149SKF)

Driveshaft Support with Bearing

from

$197.95
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

Product Features:
  • OE Quality, fit and performance
  • Precise driveshaft alignment and support
  • Pre-lubricated and sealed
  • Metal reinforced seals to prevent contamination
  • Manufactured from durable rubber compounds
See More

Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)

GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit

from

$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)

R1563Tav Rear Axle Bearing And Seal Kit

from

$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.250″ O.D.
  • 1.400″ I.D.
See More

Dorman – Front Drive Shaft (Part No.938-083)

Front Drive Shaft

from

$369.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9329)

Front Drive Shaft: Not Greasable, Direct Replacement

from

$395.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-1011)

Rear Drive Shaft: Not Greasable, Direct Replacement

from

$619.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10205)

CV Axle Shaft Assembly

from

$138.99
All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10204)

CV Axle Shaft Assembly

from

$127.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10248)

CV Axle Shaft Assembly

from

$127.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)

7.5" & 8.2" GM Redi Sleeve Yoke Saver

from

$136.99
7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 7.5″, 7.625″ and 8.2″
See More

NTN – Axle Shaft Bearing (Part No.K4010212752NTN)

Axle Shaft Bearing

from

$42.90
Axle Shaft Bearing

National – Bearings (Part No.B-2010)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Clutch Release Bearing (Part No.S-B-2010)

Clutch Release Bearing

from

$8.49
Product Features:
  • Brand may vary by location
See More

1998 Oldsmobile Bravada Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1998 Oldsmobile Bravada. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 34 different Drive Shafts and Axles in our inventory ranging from $1.99 to $883.99. That means you can find the exact parts or products you need to keep that 1998 Oldsmobile Bravada running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Oldsmobile Bravada. Driveworks, National, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1998 Oldsmobile Bravada, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 160 reviews in this category, some of the top rated parts include CV Axle Shaft Assembly with 4.3 stars and CV Axle Shaft Assembly with 4.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1998 Oldsmobile Bravada rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1998 Oldsmobile Bravada Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Oldsmobile Bravada demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Bravada the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman – Help Drive Shafts and Axles

We carry Dorman – Help parts in our stock across Axle Shaft Lock C-Clips categories, plus more. For a 1998 Oldsmobile Bravada, our most popular Dorman – Help Drive Shafts and Axles include:
Axle Shaft Lock Assortment
from $6.49
(3)
Axle Shaft Lock Assortment
Axle Shaft Lock C-Clips

Top 1998 Oldsmobile Bravada Drive Shafts and Axles from Driveworks

Driveworks products are another trusted brand when it comes to Drive Shafts and Axles for your 1998 Oldsmobile Bravada. Popular Driveworks parts include:
Oil Seal
from $5.49
(38)
Oil Seal
Axle Shaft Seals
Axle Repair Bearing
from $16.49
(19)
Axle Repair Bearing
Axle Shaft Bearings
Ball Bearing
from $19.99
(5)
Ball Bearing
Drive Shaft Center Supports

FAQs for 1998 Oldsmobile Bravada Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1998 Oldsmobile Bravada?

Out of 34 Drive Shafts and Axles for the 1998 Oldsmobile Bravada, the most popular in our inventory are:
Multi Purpose Seal
from $8.99
(19)
Multi Purpose Seal
Axle Shaft Seals
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports

What are the top-rated 1998 Oldsmobile Bravada Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1998 Oldsmobile Bravada based on customer reviews/ratings are:
CV Axle Shaft Assembly
from $138.99
(16)
CV Axle Shaft Assembly
“fit fine”
CV Axle Shaft Assembly
from $127.99
(15)
CV Axle Shaft Assembly
“Great customer service”
Multi Purpose Seal
from $17.99
(7)
Multi Purpose Seal
“Exact fit.”