1998 Oldsmobile Bravada Steering and Chassis Parts

Below you will find various in-demand Oldsmobile Steering and Chassis Parts, components and accessories for your 1998 Bravada. Advance Auto Parts has popular Bravada parts like Sway Bars, Tie Rods, Gear Boxes and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Bravada model years including 1994, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 and more. Select a category of 1998 Oldsmobile Bravada Steering and Chassis Parts below and start saving instantly.

Popular 1998 Oldsmobile Bravada Steering and Chassis Parts Categories

Steering Shaft Bearings

Power Steering Coolers

Steering Gear Box

Steering Column Shift Mechanisms

Suspension Ball Joint Kits

Center Tie Rod Ends

Steering Drag Link Adjusting Sleeves

Power Steering Filters

Lower Control Arm and Ball Joints

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Camber Kits

Power Steering Pump Caps

Power Steering Pump Kits

Tie Rod End Boots

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Pinion Bearings

Sway Bar Bushings

Pitman Shaft Seal Kits

Steering Gear Input Shaft Seals

Steering Gear Box Seals

Power Steering Reservoir Hoses

Power Steering Pump Seal Kits

Chassis Wiring Harness Connectors

Pump Shaft Seals

Essential Steering and Chassis Parts for 1998 Oldsmobile Bravadas

from

$31.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$6.49

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$21.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$50.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$27.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Hardware included for easier installation (where applicable)

from

$340.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$41.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Adjustable: Yes
Bolt Head Type: Flat
Bolt Length: 4.350 in.
Thread Size: M12 x 1.75

from

$22.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$43.99

This steering shaft bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this steering shaft bearing is designed to match the fit and function of the original bearing on specified vehicles
Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$91.99

Heavy duty design
Engineered steel composition results in a stronger component
Loose or worn chassis parts can lead to premature tire wear
Exclusive cover plate protects against contaminants leaking into the bearing surface
Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$99.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$104.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$29.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$77.99

Improves vehicle handling
Restores OE alignment
Improves steering geometry
Easy camber adjustment

from

$282.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life
HARDENDED TO MAXIMIZE STRENGTHá–áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
GREASEABLE SOCKETá–?Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT –?Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
ADDED CORROSION PROTECTIONá–?Specially-engineered coatings are applied to metal surfaces toáinhibit?premature deterioration?caused by rain, snow, salt and road grime
PREMIUM BUSHINGS –?Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality

from

$46.99

from

$51.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$17.29

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$83.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$87.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$60.99

Designed for trucks, vans, and SUVs, and CUVs, the Monroe Magnum steering stabilizer helps reduce vibrations that travel through the steering system before they get to the driver, improving control and driver fatigue in all driving conditions.

Product Features:

REDUCES VIBRATION – Ideal for trucks, vans, SUVs, and CUVs, it helps reduce vibrations that travel through the steering system before they get to the driver to improve control and cut down on driver fatigue in all driving conditions
CONSISTENT PERFORMANCE – All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
STRONG AND DURABLE – Sintered iron piston and .50-in. nitrocarburized piston rod for enhanced durability and long service life
EXCEPTIONAL HANDLING – Full displaced valving delivers better valving range on both compression and extension cycles for consistent performance
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas without excessive wear or friction
MOUNTS HORIZONATALLY – Micro-cellular gas design allows the unit to be mounted horizontally without impacting performance for improved steering control

from

$29.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$26.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$22.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$20.49

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$13.49

The purpose of the control is to maintain control of the steering and handling of the vehicle. Torsion Bar Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 83-94; GMC 83-94; OLDS 91-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 1983-1994
Weight approx: 2 Lbs
PART GROUP: 2797, 2797

from

$93.99

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

Upgrade your 1998 Oldsmobile Bravada with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1998 Oldsmobile Bravada, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Bravada functioning at its best. At Advance Auto Parts, we offer a wide selection of 111 Steering and Chassis Parts for the 1998 Oldsmobile Bravada, designed to meet your needs without breaking the bank. From Sway Bar replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1998 Oldsmobile Bravada at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $3.29 to $611.99, with an average price of $84.73. Our 111 Steering and Chassis Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 1998 Oldsmobile Bravada without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Oldsmobile Bravada, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, Carquest Premium, Dorman, and more. Moog Steering and Chassis Parts start at just $37.99 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Steering and Chassis Parts available starting at $20.49, and at an average 4.4 stars rating. With 678 customer reviews and counting, our 1998 Oldsmobile Bravada Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Oldsmobile Bravada is always ready to roll. We’re committed to providing you with everything you need to keep your Bravada in top shape, all in one place. Start shopping confidently below for your 1998 Oldsmobile Bravada!

Best-Selling Sway Bars for 1998 Oldsmobile Bravadas

Enhance the driving experience in your Oldsmobile with 15 quality Sway Bar components, starting at $16.49.

show more show less

from

$24.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$16.49

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
Wrench flats at the base of the stud allow for the use of sockets for easy installation

from

$24.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$25.99

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$50.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$50.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$50.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$17.29

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$28.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$64.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$33.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$32.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$27.99

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$24.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$16.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Most Popular 1998 Oldsmobile Bravada Tie Rods

Customize your Oldsmobile with 15 Tie Rods products like Tie Rod Ends, Center Tie Rod Ends, and Tie Rod End Sleeves, all priced under $104.99.

show more show less

from

$37.99

Coated for corrosion resistance
Engineered to meet or exceed OE Performance
Wrench flats on housing and stud provide easy installation and alignment adjustment.
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$33.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$21.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$38.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$18.99

Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$21.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$27.99

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Hardware included for easier installation (where applicable)

from

$90.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$68.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$92.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$104.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$70.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$36.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Top Picks for 1998 Oldsmobile Bravada Gear Boxes

Upgrade Oldsmobile Bravadas with top-quality Gear Boxes parts, including 4 OEM and aftermarket selections for your 1998 model.

show more show less

from

$221.99

The steering gear box is the heart of the vehicle’s steering system. It guides the wheel’s movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100 percent new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100 percent hydraulically tested to ensure perfect fit and function.

Product Features:

100 percent hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100 percent new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$65.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$271.99

Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$611.99

New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested. All units are carefully packaged to insure safe arrival at your door.

In-Demand Power Steering Parts for 1998 Oldsmobile Bravadas

Select from 35 premium Power Steering Parts parts for your 1998 Oldsmobile Bravada, with prices ranging from $3.29 to $335.99.

show more show less

from

$20.49

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$13.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$50.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$39.99

from

$118.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$91.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$29.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.49

from

$46.99

from

$36.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$29.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$6.49

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.49

Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines

from

$8.79

from

$3.29

from

$176.99

Our power steering pumps are manufactured with premium components to ensure longevity and reliability under all driving conditions. Each unit is supplied with high temperature seals and load-tested to ensure reliable performance.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$76.99

Most Sold 1998 Oldsmobile Bravada Ball Joints

Explore our best-selling Oldsmobile parts for the 1998 Bravada among 21 OEM and aftermarket options starting from $29.99.

show more show less

from

$80.99

DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$55.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$135.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$32.49

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$31.49

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$324.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$324.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$135.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$191.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$61.99

Carquest Premium ball joints are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium ball joints utilize the same ball joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all ball joints to reduce rust. Each part number in the Carquest Premium ball joint line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included for easier installation (where applicable)

from

$57.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included for easier installation (where applicable)

from

$155.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$272.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$292.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$269.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$269.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$209.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$199.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$199.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$37.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$29.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

Top-Rated Steering and Chassis Parts Brands For Your 1998 Oldsmobile Bravada

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1998 Oldsmobile Bravadas. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Carquest Premium, and Dorman, and more. Steering and Chassis Parts from these brands that fit a 1998 Bravada start at just $20.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1998 Oldsmobile Bravada Steering and Chassis Parts

When it comes to maintaining or upgrading your 1998 Oldsmobile Bravada, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 1998 Oldsmobile Bravada. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $37.99, with an average price of just $53.66. Plus, with over 18 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $37.99

(10)

Steering Tie Rod End Adjusting Sleeve

“It’s a tie rod adjusting sleeve….what more is there to say? It is built really well though, and not flimsy or junky looking. I got this for a 1994 C”

from $80.99

(7)

Suspension Ball Joint

“Excellent auto part! Wish the mechanic who fixed my ball joints before would’ve used these. Very comfortable and no more suspension squeeks.”

from $41.99

(1)

Alignment Camber Kit, Thread Size: M12 x 1.75, Bolt Length: 4.350", Bolt Head Type: Flat

“works great”

Popular Carquest Premium 1998 Oldsmobile Bravada Steering and Chassis Parts

Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1998 Oldsmobile Bravada owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1998 Bravada, Advance Auto Parts carries a full inventory of 3 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $20.49 to $39.99, plus, with more than 15 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $39.99

(1)

3/8" I.D. Return Hose J189

“Hose works great”

from $32.49

(12)

Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring

“Great product, packaged right with requirred o-rings for great fit”

from $20.49

(2)

Power Steering Repair Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube

“Well made… and cheap.”

FAQs for 1998 Oldsmobile Bravada Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1998 Oldsmobile Bravadas?

Out of 111 Steering and Chassis Parts that fit 1998 Oldsmobile Bravadas, the following parts are the top sellers:

3/8" I.D. Return Hose (J189) (sold by foot) (5190122) – $8.79
New Power Steering Filter (10417593) – $32.99
Power Steering Pump Pulley (15710002) – $29.99

What’s the price range for 1998 Oldsmobile Bravada Steering and Chassis Parts?

Steering and Chassis Part prices for the 1998 Oldsmobile Bravada start at $3.29 and go up to $611.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1998 Oldsmobile Bravada?

The average price for Steering and Chassis Parts for the 1998 Oldsmobile Bravada is $84.73. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Oldsmobile Bravada model years?

Yes, we currently carry Steering and Chassis Parts for 11 model years of Oldsmobile Bravadas between 1991 and 2004. Steering and Chassis Parts are bought most frequently for the following model years: 2004, 2003, 2002, 2001, 2000, 1999, 1997, 1996, and 1994.

What are the cheapest Steering and Chassis Parts for my 1998 Oldsmobile Bravada?

The cheapest 1998 Oldsmobile Bravada Steering and Chassis Parts we carry in stock are:

3/8" ID Return Hose (sold by each) (18070570) – $3.29
Power Steering Caps (6090435) – $6.49
Power Steering Filter (50167394) – $7.99
3/8" I.D. Return Hose (J189) (sold by foot) (5190122) – $8.79
Bearing Race (3277569) – $9.99

What are the top-rated Steering and Chassis Parts that fit the 1998 Oldsmobile Bravada?

Out of 678 reviews by customers, our 1998 Oldsmobile Bravada Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1998 Oldsmobile Bravada and their top-rated products:

Sway Bars
- Suspension Stabilizer Bar Link (21880214) – $24.49
- Suspension Stabilizer Bar Bushing Kit (20516737) – $24.99
- Sway Bar Link Kit (15510379) – $16.49
Tie Rods
- Suspension Stabilizer Bar Link (21880214) – $24.49
- Suspension Stabilizer Bar Bushing Kit (20516737) – $24.99
- Sway Bar Link Kit (15510379) – $16.49

What types of Steering and Chassis Parts do you sell for my 1998 Oldsmobile Bravada?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1998 Oldsmobile Bravada:

Can I get help with 1998 Oldsmobile Bravada Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Steering and Chassis Parts and more.

What is your return policy for Oldsmobile Bravada Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Oldsmobile Bravada Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1998 Oldsmobile Bravada Steering and Chassis Parts

Powercraft – Steering Gear Major Seal Kit (Part No.8521)

Dorman – Help – Power Steering Caps (Part No.82581)

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES3584)

Cardone – Power Steering Filter (Part No.20-0058F)

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Dorman – Lower Steering Shaft (Part No.425-111)

MOOG – Alignment Camber Kit, Thread Size: M12 x 1.75, Bolt Length: 4.350", Bolt Head Type: Flat (Part No.K6367)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6457)

Dorman – Steering Column Lower Bearing (Part No.905-512)

MOOG – Steering Pitman Arm (Part No.K6255)

Carquest Premium – Power Steering Pressure Hose Assembly, 3/8" Male Quick Connect x 16mm Male "O" Ring (Part No.37545)

Rare Parts – Tie Rod End (Part No.RP27841)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6455)

Rare Parts – Cam Bolt Kit (Part No.RP17219)

MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK620468)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2623)

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8777)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Dorman – Power Steering Pump Pulley (Part No.300-138)

MOOG – Suspension Ball Joint (Part No.K6664)

Monroe – Magnum Steering Damper (Part No.SC2937)

Powercraft – Pump Complete Rebuild Kit (Part No.7910)

Powercraft – Heavy Duty Pump Seal Kit (Part No.8935)

National – Multi-Purpose Seal (Part No.7013S)

Carquest Premium – Power Steering Repair Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.35021)

Anchor – Torsion Bar Motor Mount: Front Left, Front Right, 1 Piece (Part No.2797)

Driveworks – Ball Joint (Part No.DW-K6663)

MOOG – Suspension Stabilizer Bar Link (Part No.K80849)

Driveworks – Sway Bar Link Kit (Part No.DW-K6600)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6530)

MOOG – Suspension Stabilizer Bar Link Kit (Part No.K700526)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5207R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5207G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5206R)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6529)

Rare Parts – Sway Bar Link Kit (Part No.RP15737)

Rare Parts – Sway Bar Link (Part No.RP19045)

Rare Parts – Sway Bar Link Kit (Part No.RP22188)

Rare Parts – Sway Bar Bushing (Part No.RP17893)

Carquest Premium – Sway Bar Link (Part No.520-65554)

Rare Parts – Sway Bar Bushing (Part No.RP17894)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-472)

MOOG – Steering Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Driveworks – Steering Tie Rod End (Part No.DW-ES2249RLT)

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES3584)

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES3462)

Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)

Driveworks – Tie Rod End (Part No.DW-ES2072RLT)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

MOOG – Tie Rod End (Part No.ES3462)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

MOOG – Steering Tie Rod End (Part No.ES2249RLT)

MOOG – Steering Tie Rod End (Part No.ES2072RLT)

Rare Parts – Tie Rod End (Part No.RP27841)

Rare Parts – Tie Rod End (Part No.RP26165)

Rare Parts – Tie Rod End (Part No.RP26602)

Cardone – Remanufactured Steering Gear (Part No.27-7559)

Powercraft – Steering Gear Major Seal Kit (Part No.8775)

Lares – Remanufactured Power Steering Gear Box (Part No.1353)

Lares – New Power Steering Gear Box (Part No.11353)

Carquest Premium – Power Steering Repair Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.35021)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36196)

Cardone – Remanufactured Power Steering Pump (Part No.20-8741)

Cardone – Remanufactured Power Steering Pump (Part No.20-658)

Imperial – Mounting Kit System (Part No.226201)

Dorman – Power Steering Pump Pulley (Part No.300-200)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.35398)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)

Powercraft – Pump Seal Kit (Part No.7918)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Powercraft – Pump Complete Rebuild Kit (Part No.7910)

Dorman – Help – Power Steering Caps (Part No.82581)

Imperial – Power Steering Oil Cooler (Part No.241009)