1998 Mercedes-Benz E320 Suspension Parts
Find Your Specific 1998 Mercedes-Benz E320 Suspension Parts
Below you will find various in-demand Mercedes-Benz Suspension Parts, components and accessories for your 1998 E320. Advance Auto Parts has popular E320 parts like Air Suspension and Kits, Shocks and Struts, Coil and Leaf Springs and more. You’ll also find aftermarket and OEM Suspension Parts for other E320 model years including
2001,
2002,
2003,
2004,
2005,
2006,
2007,
2008,
2009 and more. Select a category of 1998 Mercedes-Benz E320 Suspension Parts below and start saving instantly.
Popular 1998 Mercedes-Benz E320 Suspension Parts Categories
Essential Suspension Parts for 1998 Mercedes-Benz E320s
Monroe – OESpectrum Suspension Shock Absorber (Part No.39109)
from
$91.99
Providing an exceptional level of handling precision and control, Monroe OESpectrum Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
- IMPROVES PERFORMANCE – High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
- CONSISTENT RIDE – High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- MAINTAINS STABILITY – Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – OESpectrum Suspension Shock Absorber (Part No.39108)
from
$121.99
Providing an exceptional level of handling precision and control, Monroe OESpectrum Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
- IMPROVES PERFORMANCE – High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
- CONSISTENT RIDE – High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- MAINTAINS STABILITY – Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Arnott Air Suspension – Shock – New (Part No.SK-3311)
from
$184.99
SK-3311 is an Arnott designed new rear damper for the 2003-2009 Mercedes-Benz E-Class (W211) and the 2005-2011 CLS-Class (W219) without ADS. This universal twin tube shock, which fits both the left and right side, includes a custom tuned and thoroughly road-tested damper which provides a smooth ride and excellent performance. Included in the Arnott design are new top and bottom mounts, a polyurethane bump stop, and a protective dust cover. This aftermarket Mercedes-Benz rear shock is designed, tested and assembled in the USA.
Product Features:
See More
Product Features:
- Custom-valved damper for a great ride
- Designed & assembled in the USA
- Replace in Pairs
Monroe – OESpectrum Suspension Shock Absorber (Part No.39021)
from
$123.99
Providing an exceptional level of handling precision and control, Monroe OESpectrum Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
- IMPROVES PERFORMANCE – High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
- CONSISTENT RIDE – High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- MAINTAINS STABILITY – Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Dorman – Suspension Control Arm (Part No.528-326)
from
$37.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm (Part No.522-405)
from
$101.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm (Part No.520-780)
from
$55.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Control Arm (Part No.RP11450)
from
$439.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Suncore – Air Strut Kit (Part No.127M-28-F-PAIR)
from
$1269.99
Air Strut Kit
Suncore – Air Strut (Part No.127M-28-FR)
from
$639.99
Air Strut
KYB – High Pressure Monotube Gas Shock (Part No.KG4727)
from
$106.99
The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
Product Features:
See More
Product Features:
- Adds Up To 25% More Damping Performance Over Original Equipment Shocks
- Components And Valving Designed Specifically For Your Mercedes Benz
- Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
Monroe – OESpectrum Suspension Shock Absorber (Part No.39110)
from
$141.99
Providing an exceptional level of handling precision and control, Monroe OESpectrum Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
- IMPROVES PERFORMANCE – High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
- CONSISTENT RIDE – High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- MAINTAINS STABILITY – Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – OESpectrum Suspension Shock Absorber (Part No.39020)
from
$121.99
Providing an exceptional level of handling precision and control, Monroe OESpectrum Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
- IMPROVES PERFORMANCE – High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
- CONSISTENT RIDE – High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- MAINTAINS STABILITY – Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Rare Parts – Cross Axis Bushing (Part No.RP19248)
from
$49.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Rare Parts – Control Arm Bushing (Part No.RP15913)
from
$34.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Dorman – Suspension Control Arm Bushing (Part No.533-669)
from
$42.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm Bushing (Part No.533-672)
from
$18.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Control Arm Bushing (Part No.RP15795)
from
$56.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Arnott Air Suspension – Ride Height Sensor (Part No.RH-3501)
from
$129.99
Arnott’s aftermarket ride height sensors are designed to level your vehicle by measuring the varying distances between the road and the vehicle’s chassis. The Electronic Control Unit (ECU) is provided with this information and sends a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Ride height sensors can wear out and are vulnerable to damage from road debris, accidents, water and salt intrusion. Ride Height Sensors should be replaced to prevent further damage to the vehicle’s air suspension system.
Product Features:
See More
Product Features:
- Exclusively for Mercedes-Benz C-Class (W203)/ CL-Class (W215/16), CLK-Class (W208/9), CLS-Class (W219), E-Class (W210/11), GL/ML-Class (W163/64), R-Class (W251) and S-Class (W220/21)
- Fits Front/Rear Right or Left
- Direct fit for fast plug and play installation
- Lab tested up to 1 million cycles
- Arnott’s ride height sensor restores the vehicle’s ability to respond to road conditions
- Increases comfort and dynamic capability for a premium ride
- Replace in Pairs
Dorman – Upper Position Spring Bracket (Part No.523-210)
from
$72.99
This coil spring bracket is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Upgrade your 1998 Mercedes-Benz E320 with Top-Quality Suspension Parts
When it comes to maintaining or upgrading your 1998 Mercedes-Benz E320, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Suspension Parts are key to keeping your E320 functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Suspension Parts for the 1998 Mercedes-Benz E320, designed to meet your needs without breaking the bank.
From
Air Suspension and Kit
replacements to
Shocks and Struts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1998 Mercedes-Benz E320 at great prices.
Our Suspension Parts inventory for this model
ranges from just $18.99 to $539.99, with
an average price of $131.71.
Our 24 Suspension Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 1998 Mercedes-Benz E320 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1998 Mercedes-Benz E320 is always ready to roll. We’re committed to providing you with everything you need to keep your E320 in top shape, all in one place.
Start shopping confidently below for your 1998 Mercedes-Benz E320!
Best-Selling Air Suspension and Kits for 1998 Mercedes-Benz E320s
Enhance the driving experience in your Mercedes-Benz with 1 quality Air Suspension and Kit components, starting at $129.99.
Arnott Air Suspension – Ride Height Sensor (Part No.RH-3501)
from
$129.99
Arnott’s aftermarket ride height sensors are designed to level your vehicle by measuring the varying distances between the road and the vehicle’s chassis. The Electronic Control Unit (ECU) is provided with this information and sends a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Ride height sensors can wear out and are vulnerable to damage from road debris, accidents, water and salt intrusion. Ride Height Sensors should be replaced to prevent further damage to the vehicle’s air suspension system.
Product Features:
See More
Product Features:
- Exclusively for Mercedes-Benz C-Class (W203)/ CL-Class (W215/16), CLK-Class (W208/9), CLS-Class (W219), E-Class (W210/11), GL/ML-Class (W163/64), R-Class (W251) and S-Class (W220/21)
- Fits Front/Rear Right or Left
- Direct fit for fast plug and play installation
- Lab tested up to 1 million cycles
- Arnott’s ride height sensor restores the vehicle’s ability to respond to road conditions
- Increases comfort and dynamic capability for a premium ride
- Replace in Pairs
Most Popular 1998 Mercedes-Benz E320 Shocks and Struts
Customize your Mercedes-Benz with 3 Shocks and Struts products
like Rear Shock and Struts and
Front Shock and Struts, all
priced under $123.99.
Monroe – OESpectrum Suspension Shock Absorber (Part No.39020)
from
$121.99
Providing an exceptional level of handling precision and control, Monroe OESpectrum Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
- IMPROVES PERFORMANCE – High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
- CONSISTENT RIDE – High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- MAINTAINS STABILITY – Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – OESpectrum Suspension Shock Absorber (Part No.39021)
from
$123.99
Providing an exceptional level of handling precision and control, Monroe OESpectrum Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
- IMPROVES PERFORMANCE – High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
- CONSISTENT RIDE – High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- MAINTAINS STABILITY – Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
KYB – High Pressure Monotube Gas Shock (Part No.KG4727)
from
$106.99
The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
Product Features:
See More
Product Features:
- Adds Up To 25% More Damping Performance Over Original Equipment Shocks
- Components And Valving Designed Specifically For Your Mercedes Benz
- Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
Top Picks for 1998 Mercedes-Benz E320 Coil and Leaf Springs
Upgrade Mercedes-Benz E320s with top-quality Coil and Leaf Springs parts, including 1 OEM and aftermarket selections for your 1998 model.
Dorman – Upper Position Spring Bracket (Part No.523-210)
from
$72.99
This coil spring bracket is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
In-Demand Control Arms for 1998 Mercedes-Benz E320s
Select from 19 premium Control Arms parts for your 1998 Mercedes-Benz E320, with prices ranging from $18.99 to $539.99.
Dorman – Suspension Control Arm (Part No.522-405)
from
$101.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Suspension Control Arm Bushing (Part No.K200082)
from
$38.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
Dorman – Suspension Control Arm (Part No.520-780)
from
$55.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm (Part No.520-587)
from
$539.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Control Arm (Part No.RP11450)
from
$439.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Rare Parts – Control Arm (Part No.RP11451)
from
$439.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Rein – Control Arm (Part No.SCA0074P)
from
$299.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
MOOG – Suspension Control Arm Bushing (Part No.K100302)
from
$162.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Long-lasting performance
Rare Parts – Control Arm (Part No.RP26002)
from
$124.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Rare Parts – Control Arm (Part No.RP26005)
from
$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Rare Parts – Control Arm (Part No.RP26004)
from
$92.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Rare Parts – Control Arm Bushing (Part No.RP19389)
from
$72.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Dorman – Suspension Strut Rod (Part No.522-987)
from
$69.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm (Part No.528-324)
from
$65.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Torque Arm (Part No.521-492)
from
$52.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure Longevity
Rare Parts – Cross Axis Bushing (Part No.RP19248)
from
$49.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Dorman – Suspension Control Arm (Part No.528-326)
from
$37.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm Bushing (Part No.533-406)
from
$29.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm Bushing (Part No.533-672)
from
$18.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
FAQs for 1998 Mercedes-Benz E320 Suspension Parts
Which Suspension Parts are best-sellers for 1998 Mercedes-Benz E320s?
Out of 24 Suspension Parts that fit 1998 Mercedes-Benz E320s, the following parts are the top sellers:
- Suspension Control Arm Bushing (21880883) – $38.49
- OESpectrum Suspension Shock Absorber (19710325) – $121.99
- OESpectrum Suspension Shock Absorber (19710326) – $123.99
What’s the price range for 1998 Mercedes-Benz E320 Suspension Parts?
Suspension Part prices for the 1998 Mercedes-Benz E320 start at $18.99 and go up to $539.99 for the most premium parts.
What’s the average price of a Suspension Part for a 1998 Mercedes-Benz E320?
The average price for Suspension Parts for the 1998 Mercedes-Benz E320 is $131.71. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Suspension Parts for other Mercedes-Benz E320 model years?
What are the cheapest Suspension Parts for my 1998 Mercedes-Benz E320?
The cheapest 1998 Mercedes-Benz E320 Suspension Parts we carry in stock are:
- Suspension Control Arm Bushing (50212046) – $18.99
- Suspension Control Arm Bushing (50212187) – $29.99
- Suspension Control Arm (12563404) – $37.99
- Suspension Control Arm Bushing (21880883) – $38.49
- Cross Axis Bushing (99995333) – $49.99
What are the top-rated Suspension Parts that fit the 1998 Mercedes-Benz E320?
Out of 2 reviews by customers, our 1998 Mercedes-Benz E320 Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1998 Mercedes-Benz E320 and their top-rated products:
- Control Arms
- Suspension Control Arm (11396285) – $101.99
What types of Suspension Parts do you sell for my 1998 Mercedes-Benz E320?
As of 6/2/26, these are some of the most in-demand types of Suspension Parts for a 1998 Mercedes-Benz E320:
Can I get help with 1998 Mercedes-Benz E320 Suspension Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Suspension Parts and more.
What is your return policy for Mercedes-Benz E320 Suspension Parts?
Advance Auto Parts keeps returns simple. For new Mercedes-Benz E320 Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
