1998 Jeep Grand Cherokee Steering and Chassis Parts

Below you will find various in-demand Jeep Steering and Chassis Parts, components and accessories for your 1998 Grand Cherokee. Advance Auto Parts has popular Grand Cherokee parts like Power Steering Parts, Ball Joints, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Grand Cherokee model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1998 Jeep Grand Cherokee Steering and Chassis Parts below and start saving instantly.

Popular 1998 Jeep Grand Cherokee Steering and Chassis Parts Categories

Sway Bars and Kits

Power Steering Coolers

Steering Gear Box

Suspension Ball Joint Kits

Center Tie Rod Ends

Steering Drag Link Adjusting Sleeves

Power Steering Filters

Tie Rod Ends

Steering Coupling Assemblies

Tie Rod End Sleeves

Steering Linkage Conversion Kits

Center and Drag Links

Drive Shaft CV Joints

Steering Pinion Angle Adjusting Bolts

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Camber Kits

Power Steering Pump Caps

Alignment Cam Bolts

Power Steering Pump Kits

Tie Rod End Boots

Steering Knuckles

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Pinion Bearings

Sway Bar Bushings

Thrust Arm and Ball Joints

Tie Rod Assemblies

Track Bar Bushings

Pitman Shaft Seal Kits

Steering Gear Input Shaft Seals

Steering Gear Box Seals

Power Steering Pump Seal Kits

Power Steering Hose Kits

Suspension Stabilizer Bar Brackets

Suspension Stabilizer Bar Link Bolts

Steering Gear Housing Bearings

Essential Steering and Chassis Parts for 1998 Jeep Grand Cherokees

from

$209.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$195.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$54.99

Built to withstand a variety of weather conditions and extreme temperatures, our power steering pressure hoses are designed to last through daily wear and tear while delivering smooth and quiet performance, every time. Each hose in the Edelmann Elite line has a durable zinc coating that actively protects against and helps to prevent rust and corrosion damage, and each hose also features innovative heat/abrasion tubing that is specifically designed to hold up to a range of temperatures – from the freezing cold to extreme heat waves. Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity. Every Edelmann Elite hose is equipped with the identical OEM fitting as the hose being replaced. This ensures a good seal when installed properly. All bends are made to the exact specification of the OEM hose. This ensures that the hose will fit in the space provided and takes the course of the original OEM hose. Plews & Edelmann is a leading designer, manufacturer and distributor of a broad range of automotive parts, accessories, gadgets, and tools sold to the vast majority of mass merchant, retail auto parts stores and wholesale automotive parts and industrial distribution outlets worldwide.

Product Features:

Superior temperature range performance ensures function at any temperature.
Outstanding impulse durability increases longevity of the hose.
Constructed to OEM form, fit, and function to ensure ease of installation and ongoing performance.

from

$40.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Metal Construction
Leading Manufacturer Of Quality Replacement Parts For Jeep (R)
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$38.99

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$67.99

Driveworks Brand drag links are part of a 4-bar steering linkage. Replace worn drag links for smooth, safe operation and an improved ride. The drag links help eliminate erratic steering and promote positive front-end adjustment.

Product Features:

Meets or exceeds OE performance specifications
Precision engineered for improved ride and superior performance
Performance tested to ensure durability

from

$7.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$99.99

Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:

Includes Tube; Ends And Hardware
OE Style
Direct Fit

from

$37.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$39.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$43.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Coated for corrosion resistance
Alloy steel construction provides durability
Includes any necessary hardware

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$61.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$134.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Loose or worn chassis parts can lead to premature tire wear
Exclusive cover plate protects against contaminants leaking into the bearing surface
Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$289.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge.

Product Features:

Heavy Duty Solid Steel Construction
No Modifications Needed To Factory Mounting Components
Includes all hardware needed for installation
Steering stabilizer sold separately

from

$38.99

Crown Automotive offers the largest line of replacement parts for Jeep(R) and a growing line of replacement parts for Chrysler and Dodge vehicles. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$93.99

Product Features:

IMPROVES HANDLINGáANDáPERFORMANCE: Reduces wheel shimmy, bump steer and vibration, which helpsáminimizeáon- or off-road driver fatigue
ACCOMMODATES LARGER TIRES – Engineered for vehiclesáwith oversized wheels and tires
STRONG AND DURABLE: Features a 14mm hardened chrome piston rod to resist scuffsáandácorrosion, double-welded loops at stress areas, double-strength closure method,áand hot form reserveátube
HANDLES EXTREME TEMPERATURE CHANGES: Monotube gas designáfilled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 deg. F
THE RIGHT FIT: Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware
KEEPS DIRT AND DEBRIS OUT: Sealing system with integrated dirt wiper helps keep moisture, dirt and debris from being ingested into the shock and contaminating the oil and destroying the internal seal
BUILT TO LAST: Large 46mmáfluon-banded piston for consistent sealing between the piston andámonotubeáfor precise control, ride and handling;áfor extra protection,áshock boot RS1952 and RS1961 are available for purchase
BOLD APPEARANCE: Black satin finish with distinctive Rancho red logo for an eye-catching look that stands out
BUY WITH CONFIDENCE: Comes with Rancho’s Limited Warranty

from

$67.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$236.99

The steering gear box is the heart of the vehicle’s steering system. It guides the wheel’s movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100 percent new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100 percent hydraulically tested to ensure perfect fit and function.

Product Features:

100 percent hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100 percent new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$26.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$44.99

Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

from

$195.99

The symptoms of a failed suspension stabilizer bar assembly, also known as a sway bar, can include suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding. The causes for failure can range from worn bushings and links to collision impact. The sway bar and components in this assembly are designed to match the performance of the original equipment parts on specified vehicle makes, models and years. The assembly has been engineered and manufactured to strict quality control standards for a complete sway bar repair and reliable service life.

Product Features:

Direct replacement – the components in this suspension sway bar assembly are designed to match the performance of the factory assembly on specified vehicles to help ensure predictable vehicle handling
Ideal solution – engineered to help ensure proper vehicle handling and eliminate suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding
Durable construction – designed and manufactured to strict specifications for reliable performance, and to replace a sway bar that has failed due to collision or worn bushings or links
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$249.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Durable Plastic
OE Style
Direct Fit

from

$24.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$42.49

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$8.99

STABILIZERBARLINKBLT

from

$21.99

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Long-Lasting, Durable Crown Automotive Products
Hazardous Free Material
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
Offers OE Fit And Function

Upgrade your 1998 Jeep Grand Cherokee with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1998 Jeep Grand Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Grand Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 179 Steering and Chassis Parts for the 1998 Jeep Grand Cherokee, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Ball Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1998 Jeep Grand Cherokee at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.99 to $867.99, with an average price of $113.04. Our 179 Steering and Chassis Parts in stock come from 25 trusted brands, so you’re sure to find the right part for your 1998 Jeep Grand Cherokee without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Jeep Grand Cherokee, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, DriveWorks, Rugged Ridge, and more. Moog Steering and Chassis Parts start at just $25.99 and boast an impressive 4.5 stars average rating from customers. DriveWorks and Rugged Ridge also bring quality to the table, with Steering and Chassis Parts available starting at $7.29, and at an average 4.3 stars rating. With 5,482 customer reviews and counting, our 1998 Jeep Grand Cherokee Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Jeep Grand Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Cherokee in top shape, all in one place. Start shopping confidently below for your 1998 Jeep Grand Cherokee!

Best-Selling Power Steering Parts for 1998 Jeep Grand Cherokees

Enhance the driving experience in your Jeep with 37 quality Power Steering Part components, starting at $6.99.

show more show less

from

$37.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$50.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$56.99

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$28.49

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.49

Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines

from

$119.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$102.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$24.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$75.99

from

$6.99

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$37.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$19.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$51.99

from

$67.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$66.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Easy Installation
OE Style
Direct Fit

from

$44.99

Most Popular 1998 Jeep Grand Cherokee Ball Joints

Customize your Jeep with 24 Ball Joints products like Lower Ball Joints, Suspension Ball Joint Kits, and Thrust Arm and Ball Joints, all priced under $829.99.

show more show less

from

$76.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$111.99

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$57.99

Product Features:

Forged housing provides exceptional strength and durability
Oxidation film on the surface of the metal protects against corrosion
Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

from

$44.99

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$40.99

Ball Joint

from

$79.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$93.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$121.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$157.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Premium forged housing with increased cross section of up to 52% more material in key areas
Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$195.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$218.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Includes 1 Upper And 1 Lower
OE Style
Direct Fit

from

$829.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$779.99

Full Ball Stud Pitman Arm end
Greaseable
Self aligning no bind design
Low friction

from

$519.99

Full Ball Stud Pitman Arm end
Greaseable
Self aligning no bind design
Low friction

from

$359.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$259.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$239.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$211.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$209.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$119.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Includes The Upper And Lower Ball Joints
OE Style
Direct Fit

from

$79.99

CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hardware included for easier installation (where applicable)
Knurling improves retention between the control arm/knuckle and ball joint housing

from

$66.99

OVERSIZED FOR TIGHT FIT — Designed with a larger outer diameter to ensure a tight fit in a worn receptacle
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purposeááááááááá

from

$55.99

OVERSIZED FOR TIGHT FIT — Designed with a larger outer diameter to ensure a tight fit in a worn receptacle
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
RESTORES RIDE — Provides revamped steering and handling feel
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$41.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

Top Picks for 1998 Jeep Grand Cherokee Sway Bars

Upgrade Jeep Grand Cherokees with top-quality Sway Bars parts, including 31 OEM and aftermarket selections for your 1998 model.

show more show less

from

$25.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$22.99

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$7.29

Strut Rod Bushing

from

$17.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$26.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$24.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$60.99

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$71.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$14.49

Strut Rod Bushing Kit

from

$6.99

Strut Rod Bushing

from

$9.29

Sway Bar Bushing Kit

from

$42.49

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$19.99

Strut Rod Bushing

from

$5.29

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Rubber
OE Style
Direct Fit

from

$195.99

Direct replacement – the components in this suspension sway bar assembly are designed to match the performance of the factory assembly on specified vehicles to help ensure predictable vehicle handling
Ideal solution – engineered to help ensure proper vehicle handling and eliminate suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding
Durable construction – designed and manufactured to strict specifications for reliable performance, and to replace a sway bar that has failed due to collision or worn bushings or links
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$265.99

Direct replacement – the components in this suspension sway bar assembly are designed to match the performance of the factory assembly on specified vehicles to help ensure predictable vehicle handling
Ideal solution – engineered to help ensure proper vehicle handling and eliminate suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding
Durable construction – designed and manufactured to strict specifications for reliable performance, and to replace a sway bar that has failed due to collision or worn bushings or links
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$40.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$36.99

SWAY BAR BUSHING

from

$23.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$21.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$20.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$19.99

Designed to fit a 22mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$14.49

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$13.49

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

In-Demand Tie Rods for 1998 Jeep Grand Cherokees

Select from 28 premium Tie Rods parts for your 1998 Jeep Grand Cherokee, with prices ranging from $9.99 to $795.99.

show more show less

from

$56.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$56.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$795.99

Not recommended for vehicles with over 4 inch of lift. Not compatible with smaller OEM steel wheels or wheels with deep backspacing. Not recommended for vehicles with under 2 inch of lift.

Product Features:

One Ton Strength
1/4 in. Wall Thickness
Uses 7/8 in. Tie Rod Ends
True DOM Tubing w/ No Seams
Includes Drag Link; Tie Rod; Ends

from

$554.99

Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch OD steel that is cold rolled, pierced, and drawn through dies.

Product Features:

One Ton Strength
1/4 in. Wall Thickness
Uses 7/8 in. Tie Rod Ends
True DOM Tubing w/ No Seams
Includes Drag Link; Tie Rod; Ends

from

$31.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$31.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$50.99

Loose or worn chassis parts can lead to premature tire wear
Exclusive cover plate protects against contaminants leaking into the bearing surface
Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$134.99

Loose or worn chassis parts can lead to premature tire wear
Exclusive cover plate protects against contaminants leaking into the bearing surface
Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$134.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$25.49

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$31.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$98.99

Coated for corrosion resistance
Alloy steel construction provides durability
Includes any necessary hardware

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$39.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$27.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$199.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$169.99

TIE ROD END

from

$139.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$129.99

TIE ROD SLEEVE

from

$129.99

Includes Tube; Ends And Hardware
OE Style
Direct Fit

from

$123.99

Steel
OE Style
Direct Fit

from

$117.99

Steel
OE Style
Direct Fit

from

$101.99

This spare tie rod end is designed for use with Rugged Ridge’s heavy duty tie rods and drag links.

Product Features:

7/8 inch
Left-hand Thread
W/ Hole on Top
For Use w/ 18050.82
Limited 5 Year Warranty

Most Sold 1998 Jeep Grand Cherokee Gear Boxes

Explore our best-selling Jeep parts for the 1998 Grand Cherokee among 14 OEM and aftermarket options starting from $19.99.

show more show less

from

$90.99

Skyjacker(R) steering stabilizer, A steering stabilizer is a dampening shock for your steering system. It dampens out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the driver hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive but worthy investment

Product Features:

Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
Stabilizer Dampens Out The Harshness Of The Highway, The Shimmy From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
Reduce Physical Strength Handling Larger Tires

from

$89.99

Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

Product Features:

IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
BUY WITH CONFIDENCE — Comes with Rancho’s Limited Warranty

from

$236.99

100 percent hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100 percent new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$41.99

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$65.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$271.99

Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$867.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function.

Product Features:

PWR Power Steering Gear Boxes are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
PWR does not consolidate turn ratios, ensuring OE quality replacement performance
Includes: NEW housings, internal components, ball bearings, shafts, bushings, and are precision machined and matched for optimum performance and duarability
Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Input and Output Shaft Spilne Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Supplied with a New Output Shaft Nut and all required Installation Seals and Washers

from

$666.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$611.99

New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested. All units are carefully packaged to insure safe arrival at your door.

from

$601.99

Steering Kit; Damper; Heavy Duty; 84-06 Jeep TJ/XJ/ZJ; 4.0L

from

$93.99

Product Features:

IMPROVES HANDLINGáANDáPERFORMANCE: Reduces wheel shimmy, bump steer and vibration, which helpsáminimizeáon- or off-road driver fatigue
ACCOMMODATES LARGER TIRES – Engineered for vehiclesáwith oversized wheels and tires
STRONG AND DURABLE: Features a 14mm hardened chrome piston rod to resist scuffsáandácorrosion, double-welded loops at stress areas, double-strength closure method,áand hot form reserveátube
HANDLES EXTREME TEMPERATURE CHANGES: Monotube gas designáfilled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 deg. F
THE RIGHT FIT: Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware
KEEPS DIRT AND DEBRIS OUT: Sealing system with integrated dirt wiper helps keep moisture, dirt and debris from being ingested into the shock and contaminating the oil and destroying the internal seal
BUILT TO LAST: Large 46mmáfluon-banded piston for consistent sealing between the piston andámonotubeáfor precise control, ride and handling;áfor extra protection,áshock boot RS1952 and RS1961 are available for purchase
BOLD APPEARANCE: Black satin finish with distinctive Rancho red logo for an eye-catching look that stands out
BUY WITH CONFIDENCE: Comes with Rancho’s Limited Warranty

from

$90.99

Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
Stabilizer Dampens Out The Harshness Of The Highway, The Shimmy From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
Inexpensive And Worthy Investment
Reduce Physical Strength Handling Larger Tires

from

$21.99

Long-Lasting, Durable Crown Automotive Products
Hazardous Free Material
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
Offers OE Fit And Function

from

$19.99

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Top-Rated Steering and Chassis Parts Brands For Your 1998 Jeep Grand Cherokee

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1998 Jeep Grand Cherokees. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, DriveWorks, and Rugged Ridge, and more. Steering and Chassis Parts from these brands that fit a 1998 Grand Cherokee start at just $7.29 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1998 Jeep Grand Cherokee Steering and Chassis Parts

When it comes to maintaining or upgrading your 1998 Jeep Grand Cherokee, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 1998 Jeep Grand Cherokee. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $25.99, with an average price of just $46.66. Plus, with over 21 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $56.99

(8)

Tie Rod End

“Box was open, check to make sure all parts are in there. First box was missing grease fitting and cotter pin, tie rod had grease in it.”

from $56.99

(7)

Steering Tie Rod End

“Great for upgrading TJ tie rods!!”

from $25.99

(6)

Suspension Stabilizer Bar Bushing Kit

“On a 1999 Jeep Cherokee Sport I replaced the front and rear sway bar bushings with six of the moog bushings. Each fit exact and are solid improvement”

Popular DriveWorks 1998 Jeep Grand Cherokee Steering and Chassis Parts

DriveWorks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1998 Jeep Grand Cherokee owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1998 Grand Cherokee, Advance Auto Parts carries a full inventory of 3 DriveWorks Steering and Chassis Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these DriveWorks Steering and Chassis Parts range from $7.29 to $31.99, plus, with more than 27 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $31.99

(12)

Steering Tie Rod End

“Works as it should. Easy to install.”

from $31.99

(14)

Steering Tie Rod End

“Associate brought parts outside so we could match up right ones. When I ordered online I got 20 % off. Then because of a slight mixup (my fault) I got”

from $7.29

(1)

Strut Rod Bushing

“good”

FAQs for 1998 Jeep Grand Cherokee Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1998 Jeep Grand Cherokees?

Out of 179 Steering and Chassis Parts that fit 1998 Jeep Grand Cherokees, the following parts are the top sellers:

New Power Steering Filter (10417593) – $32.99
Magnum Steering Damper (18570678) – $62.99
Ball Joint (15520430) – $57.99

What’s the price range for 1998 Jeep Grand Cherokee Steering and Chassis Parts?

Steering and Chassis Part prices for the 1998 Jeep Grand Cherokee start at $2.99 and go up to $867.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1998 Jeep Grand Cherokee?

The average price for Steering and Chassis Parts for the 1998 Jeep Grand Cherokee is $113.04. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Jeep Grand Cherokee model years?

Yes, we currently carry Steering and Chassis Parts for 29 model years of Jeep Grand Cherokees between 1993 and 2023. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 1998 Jeep Grand Cherokee?

The cheapest 1998 Jeep Grand Cherokee Steering and Chassis Parts we carry in stock are:

1.2 Inch Diameter, Black, Rubber (50074748) – $2.99
OE Replacement, Steel (12067659) – $3.99
1.02 Inch Inner Diameter, Black (50074793) – $4.99
Front Sway Bar Link Bushing; 84-01 Jeep Cherokee XJ (10186547) – $5.29
11/32" ID Return Hose (J189) (sold by each) (18071176) – $6.99

What are the top-rated Steering and Chassis Parts that fit the 1998 Jeep Grand Cherokee?

Out of 5,482 reviews by customers, our 1998 Jeep Grand Cherokee Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1998 Jeep Grand Cherokee and their top-rated products:

Tie Rods
- Steering Kit; Tie Rod/Drag Link; Heavy Duty (10185913) – $554.99
- Tie Rod End (20515407) – $56.99
- Steering Tie Rod Drag Link Kit; Heavy Duty; 87-95 Jeep Wrangler YJ (10186438) – $795.99

What types of Steering and Chassis Parts do you sell for my 1998 Jeep Grand Cherokee?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1998 Jeep Grand Cherokee:

Can I get help with 1998 Jeep Grand Cherokee Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Steering and Chassis Parts and more.

What is your return policy for Jeep Grand Cherokee Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Jeep Grand Cherokee Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1998 Jeep Grand Cherokee Steering and Chassis Parts

Dorman – Lower Steering Shaft (Part No.425-294)

MOOG – Suspension Ball Joint (Part No.K100312)

Edelmann – Elite Pressure Hose; 16mm Long Male "O" Ring x 18mm Male "O" Ring (Part No.80328E)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52005285)

Driveworks – Ball Joint (Part No.DW-K3185)

Driveworks – DRAG LINK 1 EA DRIVE (Part No.DW-DS1235)

Crown Auto Jeep Replacmnt – Black, Metal (Part No.52087865AB)

Omix – Tie Rod Assembly (Part No.18052.05)

Driveworks – Tie Rod End (Part No.DW-ES3474)

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-71294)

MOOG – Steering Tie Rod End Adjusting Sleeve (Part No.ES2079S)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.36351)

MOOG – Front Right Inner Steering Tie Rod End (Part No.DS1312)

RT Offroad – Hd Steering Kit, Lhd, W/O Steering Stabilizer (Part No.RT21004)

Crown Auto Jeep Replacmnt – Cam Bolt/ Cam Washer/ Nut (Part No.6504238K)

Rancho – RS7MT Steering Damper (Part No.RS77401)

Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8763)

Cardone – Remanufactured Steering Gear (Part No.27-7560)

Powercraft – Pump Seal Kit (Part No.8794)

Carquest Premium – Sway Bar Link (Part No.512-02090)

Dorman – Sway Bar Kit Rear (Part No.927-167)

Omix – Power Steering Pump Reservoir; 5.7L; 07-08 Jeep Grand Cherokee WK (Part No.18009.02)

Dorman – Power Steering Pump Pulley (Part No.300-306)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K3172)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Crown Auto Jeep Replacmnt – STABILIZERBARLINKBLT (Part No.6505465AA)

Crown Auto Jeep Replacmnt – OE Replacement, With Seals/ O-Ring/ Snap Ring (Part No.83500369)

Dorman – Power Steering Pump Pulley (Part No.300-302)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Imperial – Mounting Kit System (Part No.226201)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36644)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Carquest Premium – 11/32" I.D. Return Hose J189 (Part No.36287)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Quick Connect Coupler (Part No.240250)

Cardone – Remanufactured Power Steering Pump (Part No.20-39771)

Cardone – Remanufactured Power Steering Pump (Part No.20-771)

Dorman – Power Steering Pump Pulley (Part No.300-306)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36565)

Carquest Premium – 11/32" ID Return Hose (J189) (sold by each) (Part No.34996)

Cardone – Power Steering Filter (Part No.20-P038F)

Dorman – Power Steering Reservoir (Part No.603-902)

National – Bearing Race (Part No.M86610)

Crown Auto Jeep Replacmnt – Plastic (Part No.4897287AA)

Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.36368)

Powercraft – Pump Complete Rebuild Kit (Part No.8900)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Omix – Power Steering Pump Pulley; 97-06 Jeep Wrangler TJ (Part No.18011.01)

Carquest Premium – 11/32" I.D. Return Hose (J189) (Part No.36288)

MOOG – Suspension Ball Joint (Part No.K3161T)

MOOG – Suspension Ball Joint (Part No.K3134T)

Driveworks – Ball Joint (Part No.DW-K3134T)

Driveworks – Ball Joint (Part No.DW-K3161T)

Driveworks – Ball Joint (Part No.DW-K7403)

Crown Auto Jeep Replacmnt – Press In Style, Non Adjustable, Oem Replacement, With Hardware (Part No.83500202)

MOOG – Suspension Ball Joint (Part No.K7403)

MOOG – Ball Joint (Part No.K100198)

MOOG – Suspension Ball Joint (Part No.K100056)

MOOG – Suspension Ball Joint (Part No.K100312)

Omix – Ball Joint Kit; 87-06 Jeep Wrangler (Part No.18036.03)

Rare Parts – Ball Joint Kit (Part No.RP11513)

Rare Parts – Ball Joint Kit (Part No.RP12574)

Rare Parts – Ball Joint (Part No.RP13109)

Rare Parts – Ball Joint (Part No.RP11512)

Rare Parts – Ball Joint (Part No.RP13114)

Rare Parts – Ball Joint (Part No.RP71301)

Rare Parts – BALL JOINT (Part No.RP71293)

Rare Parts – Ball Joint (Part No.RP71302)

Omix – Ball Joint Kit; 84-06 Jeep Models (Part No.18036.02)

Carquest Premium – Ball Joint (Part No.400-71287)

MOOG – Lower Suspension Ball Joint (Part No.K3161T005)

MOOG – Upper Suspension Ball Joint (Part No.K3134T005)

Rare Parts – Ball Joint (Part No.RP10549)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K3160)

MOOG – Suspension Stabilizer Bar Link Kit (Part No.K700528)

Driveworks – Strut Rod Bushing (Part No.DW-K3171B)